Ubuntu Servers :: Creating An Intranet On 10.04?
Sep 2, 2010
Installed 10.04 as a LAMP. I want to be able to create a new intranet site for testing purposes.
When creating a new site with in apache, what is the recommendation for the folder? With in the var/www? Everything appears to want a domain address and since its local only, what do I use as a domain?
I have webmin installed and I would think creating a virutual server would be my first step, but I am getting hung up on the domain address.
View 2 Replies
ADVERTISEMENT
May 12, 2011
what is the best configuration in httpd.conf to set up an intranet with Apache on Windows server?
View 1 Replies
View Related
Jan 20, 2011
I am trying to create an intranet that will serve about 100 clients. If it is possible, I would like it to be set that anyone on the intranet would be able to type helpdeskin their browser bar and be taken to the intranet site. I have Webmin and there are just too many options to figure out how to do this. They may as well have written it in Chinese. File server? Email? Impossible.
I can get to the intranet locally by typing in the local IP, but no one wants to remember numbers.
Then, I need to get that intranet accessible via the internet. A domain name has already been purchased and our cable company has assigned us 5 static IPs. The issue here is getting the IP to link up with the server. The intranet has to be configured in such a way that it can be administered remotely. Again, with Webmin, I am clueless. I was going to try to use ISPConfig, but seeing as how you have to pay for the install directions
View 9 Replies
View Related
Feb 23, 2011
i run ubuntu 10.10 on a 3.5ghz quad core, 4gb ram.
I had the idea to make an inranet for me and my housemates.... i have an extensive video collection mostly in .avi and .mkv. i would like to make a page which diplays this video and lets you select from a playlist/browse the directory, howeve i didn't really want to have to recode all the video to flv.
is there a way i can do with VLC? i have looked about and the vlcwebplayer just looks like another flash player... does it support VLC recoding on the fly? or am i missing *something*
View 9 Replies
View Related
Mar 14, 2011
I want to setup an intranet mail server as a project. I tried to go through various forums but could not get a satisfactory model. My sceme of things is as follows:The server a virtual machine is after a router which has a built in dhcp server. Prefer to use sendmail but postfix ok client machines should be able to access the mail on evolution/thunderbird or web access using squirrelmail.Mail will not be relayed to anybody outside the intranet.
View 1 Replies
View Related
Feb 2, 2010
I want to set up what I assume is called an intranet server. Initially it'll just serve html web pages to users on my local Ethernet. BTW, right now users get their ip addresses from a router - 192.168.xxx.xxx - "private" IP's. This router is then connected to a modem which then connects to the internet, so there's the usual ip masquerade... I assume I'll install Ubuntu server on a dedicated PC connected to the local Ethernet.
My question is I want to insure that no one from the "outside" will ever be able to connect to the server, it's only for locals. Also locals should be able to connect to the internet and also should be able to connect to this local server if they want. What is the simplest way to implement? Are my simple assumptions correct?
View 7 Replies
View Related
May 3, 2010
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies
View Related
Feb 5, 2010
I am interested in creating a photoblog on Wordpress. Before I jump in I thought it would be wise to ask a few questions here first rather than getting into trouble and then firing absurd questions left and right. I am not very experienced regarding servers but not afraid either I was reading How-to's online reagarding installing Wordpress on Linux [url] and few questions came to mind :
1) Like any other server, does the computer that will run Wordpress have to be up and running for 24/7?
2) Since I will install Wordpress on a desktop, should I be concerned about my machine being compromised? I am not an expert on internet security so this is a big concern of mine.
3) Is it a good idea to install Wordpress on a personal desktop at all? Does running Wordpress from a different partition of the hard drive (if it is possible) help at all.
View 4 Replies
View Related
Oct 16, 2010
I'm trying to use a technique suggested by a fella at this website....
[URL]
He suggests adding an echo line to the actionban line in order to create or add to a file that will contain a list of all the IP's that fail2ban has banned.....but it doesn't seem to generate any output. .....here is the command.....
actionban = iptables -I fail2ban- 1 -s -j DROP
echo >> /etc/shitlist
I never get any IP's in the file so the echo part does not seem to work.
View 5 Replies
View Related
Oct 21, 2010
What is the recommended filesystem to use when creating a home server/nas?
I'd be sharing files using SAMBA, DLNA Server or some sort of streaming. I'll have two win7 laptops, 2 ubuntu desktops and ps3 accessing the files. Most of the time the server will just 75% read from 25% writing.
Would ext4 be an ideal?
View 4 Replies
View Related
Apr 6, 2011
I need to create .conf and .load files for php. PHP is installed and I've verified PHP with
test.php <?php
print_r (phpinfo());
?>
Is there boilerplate available for creating the .load and .conf files? I am having trouble finding it in what's been installed.
View 3 Replies
View Related
Jan 25, 2010
I have been looking at how to create a domain with only linux servers, but with both Windows and Linux PC's as clients.
View 2 Replies
View Related
Apr 27, 2010
I have a little problem: I have a share folder on Ubuntu server: - Dump That folder is share with SAMBA and everyone can put files on it
My problem is the following: When someone create a folder, the folder permissions are automatically set with:
(let's take my username: Yann)
Owner: Yann
Group: Yann
Clearly that's wrong.. I want the Group to be auto set has "users" so everyone can access the folders on that share. Anyone know how to change this ? chmod and chown is getting a bit boring
View 2 Replies
View Related
Sep 8, 2010
I am thinking of starting a business creating web pages and supplying a 'enterprise server' type solutions, whilst still being highly cost effective - eg recomend the client to use an 'old' pc for the majority of their server needs (LDAP, mail, firewall, web server etc). I plan on doing all of this on a linux platform, so as to pass the cost savings of related 'microsoft enterprise systems' to my clients ~ thereby making my proposition more interesting to clients. However I'm not sure if the 'old' pc idea will 'cut the mustard' in terms of serving web pages. So my real question is, at what point does the speed of the internet connection reach a bottle neck with the speed of my CPU? As an 'example' in case I'm not being very clear (which I'm not sure I am).
My old pc has an AMD athlon chip in it, and equally old 30GB and 40GB HDD (SCSI ~ did I mention that they are old!). My intention is to set up a system to the above type specification at home, to see how long it takes me to do, and to give me an idea of what I should charge clients. I understand all the technology, but initially (to save on personal startup costs) I was intending to use my old pc as my personal gateway to the world, $40 for the web registration for 1 year is a considerable saving compared to the $20 per month for a hosted service ~ although as soon as things are going and being 'profitable' I would most likely either upgrade my server or get a hosted service. Any tools I can download onto the server to 'determine' the power consumption over any given period?
View 8 Replies
View Related
Mar 1, 2011
I recently created a webserver to host my website, using a Ubuntu 8.10 based system. (With some help from my experienced brother of course).I now want to create a mailserver to go along with my website. In setting up postfix to work with gmail smtp servers, I ran into a lot of permission errors.
View 2 Replies
View Related
Mar 14, 2011
I have an Ubuntu server running Samba and I would like to share out the cdrom drive to the network. I made a share of the /media directory and it seems to work fine when I insert USB drives and I am able to browse and work with files. However, when I insert a cdrom it automatically mounts to /media/<volume name> and I get a permission denied error when I attempt to access it over the network. I am assuming this is happening because the permissions do not include the execute bit and being a read only file system I can not change this. I made the directory /media/cdrom and manually mounted the cdrom to it and I can successfully access it over the network just like the USB drives. So my question is: Is there a way to make the cdrom automatically mount and unmount to /media/cdrom when I insert and eject disks instead of to /media/<volume name>? Or maybe just have the permissions automatically set so Samba users can open it instead of just see it.
View 1 Replies
View Related
Feb 12, 2009
I am looking into creating a web caching server for myself using fedora 10. I believe I need to use squid for this but it seems to have a lot of features. Basically, all I want for now is to be able to cache web pages that I and my network users use the most, increasing access time and lowering the load on my internet connection. Can squid do this and can someone point in the right direction on an article on how to configure such a thing?
View 5 Replies
View Related
Sep 16, 2009
I'm putting a server together and have run into a boot up problem. (I thought about putting this in the server forum, but it might be a more generic problem that others have seen and know how to rectify.) The install seems to have gone just fine. I have the /boot partition on an internal IDE drive. The rest of that drive and another are mirrored in a Raid0 configuration (using the Linux software to do that) for data storage. The swap partition is a part of the Raid5 SCSI array that also has the / (root) partition on it.
After installation it would not finish the booting process. I suspected that GRUB didn't like all the Raid arrays and such, but it seems to be fine. I can say that because the machine will boot into rescue mode with the GUI splash screen and I have access to the whole directory tree. I have already searched on-line and following prudent advice, ran the yum update while in the chroot /mnt/sysimage mode. That only took overnight to download and most of this morning to complete. Still no dice. Used vim to delete the rhgb quiet commands in the grub.conf file so I could see where the kernel seems to be hanging.
So right after the "Creating initial device nodes" is a line about my generic PS2 wheel mouse. So I tried a USB mouse. Got more output so tried swapping out to a USB keyboard. Got a little further with more information about input devices, but still stops. Also, I tried a PCI video card just to make sure the onboard video wasn't the problem - no change. So, if someone in the Fedora community knows what loads up or is configured right after the mouse and keyboard, I might be able to figure out what's causing the computer to hang during the boot process.
View 2 Replies
View Related
Feb 28, 2010
I'm working on setting up a new subversion server and getting an error I'm not having much luck resolving.
I'm attempting to create the repository in /home/svn/foo with the command svnadmin create /home/svn/foo while in /home/svn.
I am greeted with the error: svnadmin: SQLite compiled for 3.6.20, but running with 3.6.17
I installed subversion via yum install subversion
I've installed SQLite 3.6.22 from source and removed/installed subversion with no change.
What gives? I wasn't really wanting to install subversion from source. Seems a bit excessive.
Environment stuff:
[root@COS svn]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 12 - i386 enabled: 15,366
updates Fedora 12 - i386 - Updates enabled: 4,731
repolist: 20,097
View 1 Replies
View Related
Feb 7, 2011
I need to create a lot of users locally on my server.I have these info:username:GID:UID.How I can make a "for cycle" for make a multiple useradd? (useradd -u UID -g GID -m /home/USERNAME -s /bin/bash USERNAME)I tried to do this:
touch userlist.txt (UID:GID:USERNAME)
100:110:user1
200:210:user2
[code]...
View 6 Replies
View Related
Mar 6, 2009
I'm using FC10 and I want to create a symlink to my movies directory in my home folder:
This is what I did:
I created in
/var/www/html
ln -s /home/username/movies movies
Then in /etc/httpd/conf/httpd.conf
DocumentRoot "/var/www/html"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/home/username/movies">
Options Indexes FollowSymLinks
Order allow,deny
Allow from all
</Directory>
Restart apache and then the test page is working.
The directory /home/username/movies has following permissions:
drwxrwxrwx 2 apache apache 4096 2009-03-05 23:43 movies
When trying to access my webpage at localhost/movies I get the 403 Forbidden Error.
Ok then, entering:
sudo -u apache ls /var/www/html
> movies
This works, sudo -u /var/www/html/movies returns the permission denied error.
As well sudo -u /home/username/movies
Is the user apache chrooted by default? SELinux is in permissive mode. What can I do?
View 4 Replies
View Related
Apr 25, 2010
i've installed directory server in a fedora 12 box, i got it running and i can access it using coldfusion to manage users and groups.i hit a snag when creating a user, this because coldfusion cannot generate a password, the directory server needs a certificate and a ssl connection.so i started googling for a way to generate and install a certificate on the server itself and in the directory.s is my administration server and directory(it's novabase directory) not the other one.
View 2 Replies
View Related
Jul 7, 2010
I want to do is make an old computer of mine that I use for web development be accessible to anyone within my LAN only.
so in a nutshell i don't want the world wide web to be able to access this server since I use it for development work only and i do most of my actual development work on another system since most of the applications i use requires windows.
I know you can block incoming traffic to all IPs or add individual IPs to allow in, but how can i make the firewall only accept incoming traffic from those within my LAN network?
if you wish to know what I'm using to configure my firewall, I'm using firestarter on this server
View 5 Replies
View Related
Jul 15, 2011
i've installed a PPTP VPN and have it configured under webmin. fine.i've connected from a remote laptop to the VPN and can access the local netowrk with it. greati really want to be able to access the outside world whilst tunneled through the VPN but clearly i need to do something else?
View 1 Replies
View Related
Dec 29, 2010
I've been running with DSL and Linksys router, connecting servers and printer via hard-wire Ethernet. The router doesn't like to talk to things without a network connection (the only thing I can have is a USB wireless modem until I get HughesNet or some other satellite service). What I'm wondering is what I need (a bridge? a switch?) to plug stuff in and have them talk to each other nicely.
View 14 Replies
View Related
Feb 19, 2010
I am using Ubuntu on a Windows network.
One of the computers have apache server (working), it has 192.168.1.6 IP, and the name of the computer on the network is "servidor"
I can't access from ubuntu, if I type http://servidor or 192.168.1.6, it goes to [URL], but I can access shared folders, just the host intranet server I can't
I have vmware with windows xp, and I can access http://servidor from there, but not from Firefox in Ubuntu.
View 4 Replies
View Related
Dec 29, 2010
I've recently installed Ubuntu server 10.10 on an older Pentium 3 computer to test the capabilities of Ubuntu and to have more experience with the OS. During my install, the network card, a Kingston KNE100TX, was successfully detected however auto configuration failed. This was tried against a Windows 2k3 DHCP server as well as a Cradlepoint router. As expected, since no DHCP server provided an address, the routing table is empty.
I retried configuring the Kingston card with a static IP address. This time as expected, ifconfig showed the IP address that was assigned and the route table had been populated. Attempting to ping my gateway, 192.168.17.1, resulted in Destination Host Unreachable. The same results were encountered when the configuration was changed to a different network.
[Code]...
View 8 Replies
View Related
Mar 11, 2011
(ubuntu10.10)i want to use use the Intranet and Extranet at the sanme time at school,how to set ?my Intranet ipv4 :10.62.14.79 255.255.255.0 gw 10.62.14.1my Extranet is DSL(use DHCP)my problem is when i use one of them,i must break the other.
View 3 Replies
View Related
May 1, 2009
I am using Fedora 10. I have a network design like that:
WinServer --- (r1)router(r0) --- (eth1)LinuxPC(eth0) --- intranetPC
All netmask is 255.255.255.0
WinServer network is 192.168.1.0/24
intranetPC network is 10.10.0.0/24, gateway is IP of the LinuxPC(eth0): 10.10.0.2
Router:
r1 -IP: 192.168.1.253
r2 -IP: 10.10.0.253
LinuxPC
eth0 -IP: 10.10.0.2
eth1
-IP: 10.10.0.40
-GW: 10.10.0.253
I search in Internet several days to find how to configure the LinuxPC to a gateway. The LinuxPC can ping and connect the WinServer and intranetPC correctly, but the intranetPC cannot ping and connect the WinServer network.
I used the webmin to configure the Gateway.
I used the iptables to set allow all connect, than
iptables -t nat -A POSTROUTING -eth1 -j MASQUERADE
iptables -A FORWARD -i eth0 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
In "/etc/sysconfig/network" add "FORWARD_IPV4=true"
View 11 Replies
View Related
Jul 28, 2010
There are a lot of boxes in this network and we have intranet site. If I connect computer directly to the network with everything set to automatic. I can see this intranet site. But I've installed a switch. One box has two net adapters and it takes internet, intranet and all from one adapter, the other adapter is connected to switch. Now, I have connected to this switch two computers. Internet is working fine. But I cannot get to this intranet site from these boxes. I can get into shares of other computers in the network but they cannot see me. Everything is hidden behind the gateway. But that's not the problem for me. All I want is to get to this intranet website. How can I do it?.
View 2 Replies
View Related
