Fedora Installation :: Pci 0000:01:00.0 : No Compatible Bridge Window For [mem 0xfffe0000-0xffffffff Pre F]

Jun 2, 2010

I've just recently installed the latest version of fedora on my machine. I already had win7 64-bit so I did a dual boot with the Fedora live CD using the "use largest amount of free space option"(I had intentionally left 30GB of unallocated space). The problem though is that fedora just keeps_crashing, at any point and very randomly. I didn't have this problem with ubuntu. Fedora can crash right after I initiate the boot sequence, or it can wait until the booting process starts, or the login screens shows up, sometimes it even lets my use the OS but invariably crashes. I've done numerous hard reboots which only seemed to worsen the matter, now I can barely get past login screen. This issue also happened on the live CD, but with perseverance I got fedora running on my computer.

There's an error message that shows up for a second or two right before the boot sequence is initiated, luckily(!) the system crashed at the moment it was showing and I was able to write it down :

pci 0000:01:00.0 : no compatible bridge window for [mem 0xfffe0000-0xffffffff pre f]

Here are my specs:

Intel p965 chipset (i heard this one didn't work well in previous fedora releases, maybe this is the problem?)

4GB DDR2 Ram
nVidia 8600 GTS graphic card
HDA Intel Integrated Soundcard
Intel core 2 duo E6400 processor.

View 14 Replies


ADVERTISEMENT

Fedora Installation :: Old Mac (G3s) Compatible With Advanced OS

Sep 17, 2009

Ok so was looking through a guide and stumbled on this: ppc --> 32-bit, compatible with all Macintosh computers (excluding Intel Macs) and the PlayStation 3. Does this mean that if I have some old Macs (G3s) to be precise I could put Fedora on it? Does this involve a whole lot of hacking or not?

View 3 Replies View Related

Fedora :: Aic7xxx: Probe Of 0000:00:0a.0 Failed With Error -38

Aug 23, 2009

I just installed Fedora 11 on an AMD CPU PC. I get the following error during boot up.Aug 22 21:42:07 dragon8 kernel: aic7xxx: probe of 0000:00:0a.0 failed with error -38 Because the aic7xxx has the error, it does not load the st module. I manually loaded the st module, but the /dev/st? devices do not get created, I assume because of the aix7xxx error.I can access the Adaptec AHA-2940W Bios during boot up and see the 2 tape drives that are connected to it.

View 2 Replies View Related

Fedora Installation :: KDE - Multiple Packages Exist That Are Not Compatible

May 11, 2009

I'm facing this problem since a month on Fedora 10. I have some 45 packages for upgrade through KPackageKit which belong to KDE.

While I give it to upgrade, it gives me a strange message which says
Multiple packages exist that are not compatible with each other.
This is usually due to mixing packages from different software sources.

When I press the details button, I get these details.
ERROR with rpm_check_debug vs depsolve:
libkwalletbackend.so.4 is needed by kdebase-runtime-4.2.0-7.fc10.i386
Please report this error at [URL]

I get this message only for the KDE packages. I have libkwalletbackend.so.4 in my /usr/lib directory.

View 1 Replies View Related

Fedora Hardware :: ERROR : Radeon 0000:01:05.0: DVI-D-1: EDID Block 0 Invalid

Dec 27, 2010

I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.

This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.

[Code]....

View 2 Replies View Related

Networking :: Setup A Bridge Using Bridge-utils Within /etc/network/interfaces?

Dec 8, 2008

I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.

View 3 Replies View Related

Fedora Installation :: No Terminal Window In KDE 4.2.3-1

Jun 2, 2009

Have installed fedora core 10 [kernel 2.6.27.24-170.2.68.fc10.i686 on intel core 2 Duo machine all disks encrypted. When I try to obtain a terminal window from run level 5 (KDE desktop environment) I get a bouncy terminal icon that disappears after about 15-20 seconds. No terminal window. The only way to get a command line is to press ctrl-alt-F2 and return to runlevel 3. How do I get a functional command line in runlevel 5?

View 6 Replies View Related

Fedora Installation :: How To Install On Window 7

Dec 22, 2010

how to install on window 7?

View 3 Replies View Related

Installation :: Window 7 Is Not Powering Up After Fedora 12 Installation?

Feb 8, 2010

i have installed fedora 12(from dvd) on my laptop having window 7 OS as deafult(intel processor i330)I wanted dual boot up, so I shrink the existing C partition using window using Disk Management. And then delete the newly created volume.And install feora 12(64 bit) with option "using free space".Clean installation of fedora.But when I tried to boot window as it was not able find any window OS.Although from linux all hardrive is coming as one file system and all data on Drive are intact i.e not data is lost

View 8 Replies View Related

Fedora Networking :: Two NIC's Can Be Bridge Together Even Though They Are The SAME Subnet?

Aug 9, 2009

I have 2 NIC's in a box. One of them is external and doesn't matter for this question I don't think.

The other NIC is 192.168.100.3. It hosts an iSCSI Target and SMB Share on my LAN. It's works great.

I have another PC that has NIC at 192.168.100.101 and it hosts my DHCP (Scope: 192.168.100.5-25) server for my LAN.

I have a hardware firewall at 192.168.100.1 and it serves inet to the LAN on a different external connection.

So...

I currently have a WAP (cheap p.o.s. netgear router in WAP mode that keeps overheating). I want to eliminate the WAP device and add a WiFi NIC to the Top PC above.

So, on the first system I would have:

NIC 1: External IP and External Gateway
NIC 2: Static IP 192.168.100.3
Proposed WiFi NIC 3: Static 192.168.100.4

Question:

If I bridge NIC 2 and NIC 3 like this:

# brctl addbr br0
# brctl addif br0 eth0
# brctl addif br0 eth1

Then I simply put the WiFi in Ad Hoc, will another WiFi in Ad Hoc (for example my laptop) be able to "see" 192.168.100.101 (DHCP) & 192.168.100.1 (Gateway) (via WiFI 192.168.100.4 through the bridge to 192.168.100.3 and on to the LAN)?

Also, can the two NIC's be bridge together even though they are the SAME subnet?

View 1 Replies View Related

Fedora Networking :: How To Setup Bridge

Oct 4, 2009

I tried google but without success. I have a small home network and one computer has to work as a bridge (comp1), it connects to the internet through wlan and is connected with cable to other computer (comp2), I would like to to make that second computer member of a local network with internet access.I was trying this:

Code:
ifconfig wlan0 0.0.0.0
ifconfig eth0 0.0.0.0
brctl addbr br0
brctl addif br0 wlan0
brctl addif br0 eth0

[Code]...

View 8 Replies View Related

Red Hat / Fedora :: Command - Take Screen Shot Of Non Focused Window Or Minimized Window?

Oct 30, 2010

Is there any command /utility in linux that would Take screen shot of non focused window or minimized Window?

View 3 Replies View Related

Fedora :: Top Title Bar Of A Window That It Maximizes The Window Instead Of The Rolling Up Type Effect In Compiz And Bluetooth

Jan 17, 2010

Is there some way top stop the "blind effect" of compiz so that when you double click the top title bar of a window that it maximizes the window instead of the rolling up type effect? Also when i place my mouse on the top right of the screen it brings it to a choosing window type mode where you can pick which window you would like to open, is it possible to get this on the top left of the screen instead? Lastly when I use Kdebluetooth4 to send a file to my computer where does that file save to?

View 2 Replies View Related

Fedora Installation :: Can't Boot Into F9 After The Reinstallation Of Window XP?

Jan 29, 2009

I can not boot into F9 after the reinstallation of Window XP. So I booted from the F9 live cd and tried to repair the grub. Here is what I did in the terminal:

Code:
[fedora@localhost ~]$ grub
bash: grub: command not found
[fedora@localhost ~]$ whereis grub
grub: /sbin/grub /usr/share/grub /usr/share/man/man8/grub.8.gz
[fedora@localhost ~]$ su
[root@localhost fedora]# /sbin/grub

[Code]...

View 4 Replies View Related

Fedora Installation :: 10 Fails To Load X Window?

Mar 22, 2009

I was trying to install fedora 10 onto my new computer, with the full dvd. my new computer has 2G ram, Radeon 4670 and a Gigabyte motherboard. after i started up the installation, while it saying "loading anacoda...." the line" X window fail to load. Back to text mode." So should i continue with the installation? because i fear that after i installed the fedora 10 onto my computer, i have to use it in text mode

View 6 Replies View Related

Fedora Installation :: Point To Activate Window In F12?

Nov 18, 2009

I have just installed F12, and have a question. I like to activate windows by moving mouse pointer to it without the need to click in it. I can use System->Preference->Windows to set that. In F12, the Windows under Preference is gone. How do I change the "click to activate" into "point to activate"

View 2 Replies View Related

Fedora Installation :: Cannot Get A Flash Screen Or Any Window?

May 4, 2011

last night I updated Ubuntu 10.11 and then upgraded to 11.04. However, the upgrade did not work. I tried to reboot and cannot. I cannot get a flash screen or any Ubuntu window. That is the only OS on that desktop system. So, I attempted to install Fedora 14 -i386 DVD but also unsuccessful. How do I erase Ubuntu and start an fresh install of Fedora 14?

View 1 Replies View Related

Fedora Networking :: Bridge Internet Connection In 7?

Jul 3, 2009

I want to connect my dataone broadband connection in bridge mode in fedora 7. As i am currently using a bridge connection through this modem (smartAX MT882) in win XP, i want a bridge connection in fedora 7 too to access the internet from linux. I have gone through some forums discussing this issue. somewhere i have found the option "adsl - setup" and tried it in my fedora 7. But it is showing the message "adsl- command not found" on this issue. I need a detail step by step procedure for brigde connection using datone in fedora 7.

View 3 Replies View Related

Fedora Networking :: Setting Up A Bridge With No IP Stack?

Aug 3, 2009

I'm trying to set up a Linux box with three ethernet interfaces as a bridge where I can do some packet filtering. I don't want this box to have any IP stack, packets that are allowed through the filter should be forwarded without changes just the way a switch would do it. I have build a kernel with ethernet support but no IP stack. It detects my interfaces, and I can bring them up with the ifconfig or ip commands. But when I try to start a bridge with brctl I get this error message:

can't setup bridge control: Address family not supported by protocol

A google search for that error message gave me no results at all. The command I used was "brctl addbr br", which does work on a full installation. Does brctl require IP support in the kernel? That would be a bit odd I think, since brctl doesn't do anything IP related, everything it does is at lower layers?

Does anybody know what the above message means, and what I might have been doing wrong?

View 3 Replies View Related

Fedora Networking :: Cannot Forward Internet Over Bridge?

Feb 27, 2010

What I am trying to do: bridge 2 NICs in my linux box eth0 connects to linsys router (which in turn connects to internet) eth1 connects to Xbox 360

What I did:

Code:
ifconfig eth0 0.0.0.0
ifconfig eth1 0.0.0.0
brctl addbr br0
brctl addif eth0
brctl addif eth1

[Code]...

I'm sure this is a bridging issue and there is just some option I'm not setting correctly. Also, the reason I'm connecting the Xbox 360 directly to the linux box and not to the router is for traffic monitoring purposes. Note that all connections and functionality work perfectly when the Xbox IS connected through the router.

View 7 Replies View Related

Fedora Networking :: Iptables On Bridge Ports?

Apr 21, 2011

I'd like to pass all traffic between bridge ports via the FORWARDING chain, so I changed following sysctl parameters:

Code:
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1

[code]...

View 1 Replies View Related

Fedora :: Bridge Interface Setup (VirtualBox And LAN)

Jun 28, 2011

Does anybody know how to setup bridge interfaces on fedora 15 (VirtualBox4 interface and my LAN interface)?

View 1 Replies View Related

Fedora :: F15 Sandy Bridge SSD Speed Regression 2.6.38 / 2.6.40

Aug 17, 2011

Fedora 15 / Lenovo T420 / Sandy Bridge / SSD Crucial 256GB nearly 500 MB/Sec working perfectly with kernel 2.6.38, after upgrading to 2.6.40 (due to external monitor problem), speed decreased to 300 MB/Sec.

View 6 Replies View Related

General :: Scrim Bridge Keeps Crashing (Fedora 12)?

Apr 14, 2010

Could someone please explain to me what Scrim Bridge is and how to correctly/disable it since I keep getting a warning message that Scrim Bridge has crashed.The message goes like this:warning: .dynamic section for "/lib/libc.so.6" is not at the expected addresswarning: difference appears to be caused by prelink, adjusting expectationsCore was generated by `scim-bridge'.Program terminated with signal 11, Segmentation fault.

View 2 Replies View Related

Installation :: PHP Compatible With Systems Or Need Configuration?

Nov 10, 2010

I have stumbled up around many problems in the past weeks, and recently my windows server is just giving me big pain with the DNS. Instead of having constant trouble trying to fix those problems that doesn't stop coming. I am trying to find the opportunity to transfer my settings onto a Linux setup. My needs are pretty simple, I am currently creating a simple website for a school project that I need to finish fairly soon. I also need to attach it to a forum, most likely phpBB3.

My first question would be: Which OS should I opt for. CentOS, SUSE, Ubuntu Server? Should I add in features into that to make my transfer simpler? Secondly, what would be the website manager, Apache or IIS? Is php easily compatible with the systems, or will it need configuration somehow? Finally, can it be possible for me to install programs that are exclusive to windows, such as Dreamweaver? I got a small knowledge on Linux systems, but I am completely new to the server side!

View 6 Replies View Related

Fedora Installation :: F9 - Cannot Login To Gnome Window Manager

Jan 23, 2009

I tried to install Compiz on F9 Gnome and I added a startup entry (system, preferences, personal, session, startup programs). Now I can't log in to the gnome window manager, it logs in and then logs out again. I would like to remove the entry that I created in the startup programs, but I don't know which file to edit. Where the settings to the System > Preferences > Personal > Session > Startup Programs are stored.

View 1 Replies View Related

Fedora Installation :: Install Still Attempts Window Boot

Sep 26, 2009

I'm having an issue installing Fedora 11 on my system. After the install, I remove the DVD media, reboot the system, and it reports an error stating that Windows cannot start, missing or corrupted hal.dll file. I appologize if this is a common problem or has already been answered. My searches haven't yielded helpful information, mostly what I've found is people attempting to setup dual-boot machines or boot Fedora via the Windows Boot Loader.I have experience in computers, although I am completely new to Linux/Fedora. Through my work, I have experience using AIX, but no experience installing or managing drive partitions.The system in question is a 5 year old Windows XP system that I built myself. The system has two drives (C: and D: in Windows). The C: drive was the Windows install drive and the D: drive was added later for additional storage. I am attempting to completely overwrite Windows on this machine. I want it to single boot into Fedora 11, I am not looking for a dual-boot system. The system will become a network file server.

The specs of the system are...
Processor: AMD Athlon 64 3500+
Mobo: Gigabyte GA-K8NSNXP-939
RAM: 2GB

I downloaded the DVD iso for Fedora 11 x86_64 via Bit Torrent, burned the ISO to DVD and booted the system from DVD. I ran through the install (Anaconda 11.5.0.59) and see the following information on the screens..

View 2 Replies View Related

Fedora Installation :: How To Install Awesome Window Manager

Dec 27, 2009

I've been searching for tutorials on how to install awesome, it would be nice if someone can guide me on how to install Awesome Window Manager.

View 2 Replies View Related

Fedora Installation :: Unable To Boot Window 7 After Installing 12?

Feb 8, 2010

i have installed fedora 12(from dvd) on my laptop having window 7 OS as deafult(intel processor i330)I wanted dual boot up, so I shrink the existing C partition using window using Disk Management. And then delete the newly created volume.Clean installation of fedora.But when I tried to boot window it is showing "No C drive exist".Although from linux all hardrive is coming as one file system and all data on Drive are intact i.e not data is lost.

View 5 Replies View Related

General :: Set Umask To 0000 For A Special User?

Jan 25, 2010

Please see below:

vim ~/.bashrc
umask=0000(bottom line)
source ~/.bashrc

But when I relogin, default umask was still 0022. How could I do ?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved