Slackware :: Doesn't Seem To Support Ssl Connections - Links-2.3pre1-x86_64-1 And Ssl?
Mar 15, 2011
I am using slackware64-current. I have installed the package links-2.3pre1-x86_64-1 and I love it. I launch it from the command line with the "links -g" switch and it can display pictures, it's great, but it doesn't seem to support ssl connections.
Am i doing something wrong or do I need another build? I know that in the past there used to be two different binaries, is it still so? Where can I find a ssl-enabled binary for 64 bit without need to recompile?
View 5 Replies
ADVERTISEMENT
Dec 2, 2010
The sc spreadsheet app doesn't really work in 64bits. It launches but you're unable to do anything with it, it's not possible to enter any values in the cells or do anything else. It works fine in 32bit though.
To make it work properly in 64bits, you can use this patch, borrowed from debian: http://salix.enialis.net/x86_64/13.1...changes-7.16-3
And there is also this patch to make DESTDIR work properly with the Makefile: http://salix.enialis.net/x86_64/13.1...-destdir.patch
View 3 Replies
View Related
Feb 23, 2011
I like this linux distribution more than the others that i have used, because is more stable for my work. But there are some little problems that I can't solve. I'm using it with a laptop HP G60 and i can run OpenOffice, Mozilla and some other programs (python, grass, qgis) that used for work at the office, but when I go home and want to watch a movie with my girl, listen some music or any other simple task, i find a lot of little problems:
1. Adjust the bright of the screen, the Power Management Guidance don't do it and I really need it.
2. Can't play movies in VLC "No suitable decoder module. VLC does not support the audio or video format XVID. Unfortunately there is no way for you to fix this"
3. And today I can't play music because there is a message "KDE detected that one or more internal sound devices were removed" this is: Output HDA Intel, INTEL HDMI 0 (HDMI Audio Output)
I know maybe these problems are stupid but in windows is easier to fix them. I'm tired of search in google because i just find solved problems for Ubuntu and it takes a lot of time.
View 5 Replies
View Related
Jul 16, 2010
Fedora13 x86_64 not support SATA3, can only degrade switches over SATA2 the slot. Hoped that fedora 14 will support SATA3 the device.
View 6 Replies
View Related
Mar 17, 2010
I am having following problem. If I try to change my SMB password, it throws following error >
Quote:
~>smbpasswd
Old SMB password:
New SMB password:
Retype new SMB password:
Server did not provide 'target information', required for NTLMv2
rpc_pipe_bind: rpc_send_auth_reply failed.
machine 127.0.0.1 does not support SAMR connections, but LANMAN password changed are disabled
Failed to change password for user1
View 1 Replies
View Related
Feb 17, 2010
Is there any links to Slackware 13 iso image? At official site there is a folder with subfolders, so I have to download them file by file.
View 6 Replies
View Related
Oct 2, 2010
I have just been forced into upgrading my mother board and cpu so now own a x86 cpu and was thinking i would give the x86_64 Slackware a try. I realize that i need to do a reinstall but can i save my /home partition? Will that save my settings or am i asking for problems? I assume i can just drop all of my config files into the new install as well.
View 4 Replies
View Related
Jul 24, 2010
Updated to Firefox 3.6.6 Clicking on any link on a page does not work. Same in 3.6.7 Hardy Heron
View 3 Replies
View Related
Jun 29, 2011
after updating to fedora 15, the http links in Thunderbird doesn't work.I have tried many solutions, but without result.
- in prefs.js add :user_pref("network.protocol-handler.app.ftp", "/usr/bin/firefox");
user_pref("network.protocol-handler.app.http", "/usr/bin/firefox");
user_pref("network.protocol-handler.app.https", "/usr/bin/firefox");- I have tried it with KDE and GNOME.
- move .thunderbird to .thunderbird.backup and reopen thunderbird. But still same problem.
- When I create a new user it works correctly! So I think it must be related to the update.
- I also change the default application (in System Settings) to google-chrome and Opera. But no result.
- http-links in other application (dolphin, nautilus, ...) works correctly
View 1 Replies
View Related
Oct 7, 2009
I am having problems install VirtualBox and followed the errors to see that the link for Build (2.6.29) links to a non existent folder.
I also find it weird that there is actually a 2.6.30 kernel folder as well.
Not sure if this is just n00b issue, but VBox won't install and I was wondering why one of the kernels listed would link to nothing...
View 11 Replies
View Related
Mar 15, 2011
It looks like the ocfs2console is broken on openSuse 11.4 64bit. I tested on several servers and my laptop. It works under 11.3 x86_64 but that uses Python 2.6. OpenSuse 11.4 uses Python 2.7.
I tried to submit a bug but I can't seem to get my email address verified so I can use the bug tracker.
Server1:~/python-gtk/pygtk-2.12.1 # ocfs2console
ERROR: Unable to initialize the windowing
system: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Server1:~/python-gtk/pygtk-2.12.1 # uname -a
Linux Server1 2.6.37.1-1.2-xen #1 SMP 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Server1:~/python-gtk/pygtk-2.12.1 # python
Python 2.7 (r27:82500, Aug 07 2010, 16:54:59) [GCC] on linux2
View 2 Replies
View Related
Jul 8, 2010
I've been using Opera 10.11 on two different computer systems, two different locations (work & home), and two different Slackware versions (13 & 13.1 current). Opera 10.11 runs very quickly on both. After upgrading to Opera 10.60, I now find that linking to new web pages takes 5 to 10 seconds, but returning to a previous page is almost instantaneous.
I've tried installing 10.60 using slackbuilds and Opera's installer - both give the same results. I've since reverted to Opera 10.11. why it is so slow to open web pages? Opera 10.60 for Win7 works great, so what happened to the Linux version?
View 11 Replies
View Related
Dec 24, 2010
So, approx 2 weeks ago, clicking on links in Thunderbird stopped working. There is no response in the browser whether it is open or not. I am able to paste the links to the browser just fine. Being congenitally lazy, I would rather just click them. I have upgraded to the latest version of Thunderbird and have the same issue. I have tried using Swiftfox, Firefox and Opera - all give the same non-response.
Am not getting any error messages, the links just do not open. Can't find any settings relevant to this issue.Any bright ideas out there?
View 8 Replies
View Related
Feb 7, 2011
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies
View Related
Jul 27, 2010
I've got a ATI graphic card, which is not a Radeon bla bla, and it is a Fire Pro MV 2260. I download the official driver from ATI(AMD) website, and it gives me:
'firepro_8.723-linux_98794.zip'and unzip will produce 'fglrx-8.723'
I change the things according to this thread:
openSUSE Lizards ATI HD57xxx fglrx drivers under 11.3
However, after installation I can't start X. The log shows the kernal doesn't match.
Then I try to install the ATI Catalyst 10.7. It won't start X as well. I think maybe ATI Catalyst 10.7 is particular designed for Radeon, isn't it?
BTW, why there is no entry for 11.3 at:
Additional package repositories - openSUSE
NVIDIA drivers is updated, but ATI seems very lazy...
View 9 Replies
View Related
Mar 21, 2010
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
View 7 Replies
View Related
Apr 1, 2011
auto generated doinst.sh files when using the -A switch.
The file will contain link removal and generation for libraries in the package eg.
When upgrading to a new version of the app, the library name might change eg.
So the links that doinst.sh creates is now incorrect. ie. the link is now dead because it points to a file that does not exist. Does one have to regenerate .src2pkg and resulting doinst.sh when using a new version of the package or is there another way to have doinst.sh regenerated without redoing .src2pkg?
View 2 Replies
View Related
Jan 13, 2010
I used the fbreader.SlackBuild in a 64bit system to create a package and I got some libraries installed under /usr/lib instead of /usr/lib64. FBReader seems to work fine though, so I'm not sure this is a problem. I guess it could be if some other app looks for those libraries. Just thought I should report it anyway.
I used UI=gtk if it matters.
View 6 Replies
View Related
Apr 8, 2011
I'm an new to Slackware.I want to ask how to run 32bit program on x86_64.
My Slackware is 13.1 x86_64.
View 2 Replies
View Related
Feb 26, 2010
I am having difficulties to connect MX 5500 Keyboard and mouse through the Bluetooth dongle.
I am running on the latest kernel, 2.6.32.7, from Slackware64 current.
I have done some searches and followed the procedures below:
Quote:
Quote:
Quote:
Quote:
Restart my system.
Plug in the dongle with red button pressed.
Quote:
Press red button on the mouse back and issue the following command
Quote:
Can't get device information: Function not implemented
Same thing happened when I tried to connect keyboard.
What should I do to connect keyboard and mouse?
View 1 Replies
View Related
Apr 9, 2010
The background to the problem. I was dangerous, not deadly or elite and I want to be that way again. The best representation that I have found is oolite. Now this installs by auto-package but only in 32-bit and I find auto-package a bit of a pain. I have the windows version installed and running under wine but would prefer a compiled 64-bit Slackware package.
Oolite requires gnu-step so I have downloaded the source and some old (12.2) slackbuilds, which I have modified, and made a package for gnustep-make. The next stage is to make a package for gnustep-base however it is failing with the following error
Code:
./configure: line 1390: gnustep-config: command not found
configure: error: cannot run /bin/sh /tmp/SBo/gnustep-base-1.18.0/config.sub
View 14 Replies
View Related
Jun 28, 2011
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies
View Related
Nov 17, 2010
I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
View 2 Replies
View Related
Sep 25, 2010
I try to fetch links from a URL using HTML::LinkExtor, but it always return 0 links even if the status code is 200 OK. I am running the following code in Ubuntu 9.04, just curious if the module is too old and its ways of HTTP request is disabled by some platforms.
Code:
#!/usr/bin/perl
use HTML::LinkExtor;
[code]...
View 2 Replies
View Related
Jan 17, 2010
I'm trying to get skype to work on my new system. It seems to install, but trying to run it I get an error message naming a missing dependency. Searching for this with yum whatprovides and installing the result worked in one case, but for the next one, yum install <package containing missing item> returns a few errors of the form:
package <name-version>.fc12.x86_64 (which is newer than <package-version>.fc12.i686) is already installed Is there any way around this? I'd like to get skype working, but am having no luck at the moment. I'd prefer not to remove the .x86_64 packages if I can avoid it in case that breaks something else.
View 14 Replies
View Related
Mar 18, 2011
I created a F14 x86_64 guest OS in VirtualBox4 (hosted by F14 x86_64) and configured it to get its IP from my router but it won't do so on boot. The other guest OS's (Fedora 14 i386, 2x Oracle EL5) are able to get their IPs on boot.
I checked the setting in the network manager and they show that the interface is to be activated on boot but it doesn't. When I log in and run ifup eth0 as root it works.
View 1 Replies
View Related
Jun 12, 2010
I've got 13.1 x86_64 installed on /dev/sda2, and I would like to have 13.1 x86 installed on /dev/sdb2. How do I setup lilo.conf to handle this? While installing 13.1 x86 on /dev/sdb2 I skipped the LILO step, so what I currently have is a full 32 bit Slackware 13.1 install on /dev/sdb2, but no way to boot it.
View 2 Replies
View Related
Jun 5, 2011
I'm mainly asking beforehand so I won't have to shoot myself in the head twenty minutes from now. I suppose I'll find/figure out one way or the other anyway . Can I just source the 32dev.sh and then run sbopkg -i if the source for the package I want to create isn't 64bit capable? I might need to change the $ARCH variable to x86_64 too, right?
View 1 Replies
View Related
May 27, 2011
Boot process ends up as shown at attached jpg.I use Biostar motherboard P35D2-A7 When I tried to use the kernel on the installation dvd I got working system. But no succes with huge or generic (with initrd) kernels.
View 3 Replies
View Related
Mar 23, 2011
I'm trying to install Tk from CPAN in slackware-current x86_64 for perl v5.12.3 and get the following error message
Code:
In file included from Xlib_f.c:8:0:
Xlib.h:22:15: error: conflicting types for 'XKeycodeToKeysym'
/usr/include/X11/Xlib.h:1694:15: note: previous declaration of 'XKeycodeToKeysym' was here
[Code]....
View 3 Replies
View Related
