I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 RepliesA certain program I use requires pango and gtkglext in 32 bit. I had already installed both of these in 64, and just now I downloaded .rpms for them in 32 bit and used rpm2tgz to turn them into .tgz files. The application i needed them for now works fine, but I'm wondering if installing precompiled packages like I did may mess with the 64 bit installs I already did, or if they can both be installed at the same time without any issues.
View 3 Replies View RelatedI have installed multilib by [url]. And 32-bit programs can run.
When I compile packages,something error.
Quote:
Quote:
I have tried what [url] say and not work too.
I created this small how to install the binary Blender 2.49b on Slackware 13.1 86_x64 Multilib.
http://wiki.blender.org/index.php/Do..._Blender/Linux
Does anyone know if I need to build the proprietary ATI drivers specifically for 32-bit, or do the 64-bit packages take care of 32-bit compatibility? If so, how would I do that?
I tried:
Code:
But the package has the same files as its 64-bit counterpart. The reason I'm asking is I'm trying to get Neverwinter Nights working and a post I found mentioned this problem.
I get a single line error: "Failed to initialize graphics."
I want to take out the multilib capability for my system. Is it as simple as using "slackpkg clean-system", to remove all the compat32 pkgs, then using "slackpkg upgrade-all" to replace all the gcc and glibc packages?The reason I ask, is that I only used the multilib to be able to run Google Earth. There are no other x86 packages on the system. I have another x86 computer that will run Google Earth if I need it. It just wasn't worth it for this one package.
View 3 Replies View RelatedI installed Slackware64 13.1 two days ago for the first time ever on my Dell Inspiron 1525 after using linux for about a year (Debian and Fedora, though I've installed a few others in VMs). I've really enjoyed Slackware so far, it's been comparatively trouble free. However, I decided to follow AlienBOB's instructions to make it multilib, and though I thought I'd done everything right - I can't seem to compile any 32-bit 13.1 slackbuilds; I've tried with sbopkg as well as the normal method, but it simply won't work. I must have done something wrong, but I've re-read the instructions on getting mutilib working several times and I can't work out what it is.
View 14 Replies View RelatedI'm running a generic kernel with Slackware64 13.37 multilib. Every now and then it freezes at the boot time. It probably happens 1 every 5-7 times, so it's not a big problem, but it indicates that something is not right.
View 9 Replies View RelatedIs there an easy way to get all of the multilib files from [URL]? I've tried:
1.) wget - won't use wildcards on an http server, and trying to get the whole folder just gets me index.html
2.) ftp - it's not an ftp server and I can't login anonymously via gftp. I wasn't expecting this to work, it was just something else to try.
3.) rsync - If this could work, I may not be using the right syntax. I tried (-n for a dry run first):
Code:
rsync -avn [URL]
And it just sat there doing nothing until I hit ctl-c.
Obviously I could download each file from my web browser but I figured there had to be a more elegant Unix-y way without all the clicky-clicky. Are the files hosted on an ftp server anywhere?
I have an old Win98 program that controls my amateur radio transceiver. I want to try it in wine, so have followed Eric's instructions on a clean -current installation. When I get to the wine SlackBuild, it tells me that it needs fontforge & webcore-fonts. I am assuming that I need to install these dependencies as 32-bit, but I am not sure, so would someone use the proper baseball bat to get me on track?
View 3 Replies View RelatedI'm going to install Slackware 13.1 soon and I may also install the 32-bit compatibility libraries from Eric (Alien BoB).I'd like confirmation on the process of updating multilib Slackware when there's a security patch. I'm talking about running the -stable branch, by the way.Under the normal methods of updating (e.g. 'slackpkg upgrade-all' or using the script I developed to download a local mirror of the patches directory and install from there, or even doing it by hand), the regular 64-bit packages will get updated.However, the 32-bit compatibility versions of those files won't get updated. Right?So I'll need to download the new 32-bit patches, run the convertpkg-compat32 script on them, and then upgradepkg the new files.
View 8 Replies View RelatedI have a Slackware64-Multilib 13.1 (from the Alien's wiki page) and decided to upgrade the kernel 33.4 to the 37.6 (also using the Alien's wiki page).
But now Adobe, Wine and other related packages with Multilib does not work. So I upgrade the gcc and glibc packages but the problem remains. What did I mess?
Would it be possible/advisable to add a note to the security emails if an updated package is also part of the multilib install? I know with this last round of updates, seamonkey-solibs and cups are a part of multilib. I snagged the 32bit versions, converted them, and upgraded. It's kind of hard to keep track of which packages are a part of multilib.
View 1 Replies View RelatedI have an odd problem with a computer I just set up. It is slack64 with Alien Bob's multilib packages. When I have the gtk+2-compat package installed I can no longer see any printers in firefox. I get error messages showing that it is trying to use the 32bit gtk+2 stuff. If I uninstall the gtk+2-compat package the printers show up as they should in firefox. I do not have this problem on my own slackware64/multilib system.
View 3 Replies View RelatedI am trying to use projectM with amarok, using jack. i have jack up and running fine, amarok works, and projectM builds, but it doesnt run. i built the 2.0.1 both from source and from SBo, but neither of them run correctly. when i run projectM-jack, i get the following spit back at me:
Code:
dir:/usr/share/projectM/config.inp
reading ~/.projectM/config.inp
[code]....
using Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to
/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins
and i still get the same result. what am i doing wrong?
I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
how to get Lightening working with Thunderbird on a 13.1 multilib system.
View 3 Replies View RelatedI just installed Slack 13.1 x64 on my laptop and set up multilib per Alien Bob's wiki. I even successfully compiled and installed grub afterwards. But, am having big problems trying to compile or install guarddog. On my 1st try, I downloaded guarddog from Slackbuilds and replaced the SlackBuild script with this one which is off a thread in this forum:
Code:
It **appears** to compile, but, no .tgz package is made. I have folders and files under /tmp/SBo.
So, then I went back to SlackBuilds and downloaded this, original, 12.2 SlackBuild file:
Code:
I was trying to use alien bob's slackbuild mentioned in another thread [url] and it failed everytime, so I tried to do it individually, building dependencies with sbopkg which worked except for Schroedinger and then ffmpeg still fails. I don't have access to the logs or fail messages at this moment, but I'm wondering if it is failing due to the newest gcc-multilib version? I'm also running kernel 2.6.33-rc3 with multilib-current.
View 4 Replies View RelatedI just thought I would post this file since I was doing it for myself. This is the stock /etc/slackpkg/blacklist file with AlienBOB's multilib and kde 4.4.2 packages added. If I screwed something up please let me know!
Code:
# This is a blacklist file. Any packages listed here won't be
# upgraded, removed, or installed by slackpkg.
#
# The correct syntax is:
[Code]...
I am running Slackware64-13.1 on my laptop. I need to install skype on it. Searching this forum suggests that I install Alien Bob's multilib [URL] However, skype is the only 32-bit package I need and I will not need to compile any 32-bit software. So what is the minimal multilib install (the minimal set of 32-bit libraries) that make it possible for the 32-bit Skype to run on a 64-bit system? Will running
Code:
ldd /usr/bin/skype
on my 32-bit desktop machine provide me that minimal list of 32-bit packages? Also, will the installation of these libraries somehow interefere with the original 64-bit system?
I have a couple questions about Xfoward.
1: How much does it affect securty, over a lan network?
2: Will it cause any other security issues?
3: The most important is can I forwad X11 from a 32 bit slackware to a 64bit slackware
I know the subject title makes it seem like this should be something on the Slackware forums but I think it can be generalized to other 64-bit Linux operating systems which is why I ask here. I'm running Slackware 13.37 64-bit and was wondering if I use Wine to run a Windows program (with multilib files), would it still run as if it had been used on a 64-bit computer?
View 2 Replies View RelatedI'm using Slackware64 with multilib (AlienBob) and i can't compile 32bit programs; 64bit programs do compile (tried helloworld). I read the tutorial and folowed it step by step setting my paths right (32dev.sh) and changing libsuffix="64" to libsufix="" from the slackbuild script.
In the attached config.log in the core test section there is this line that i find interesting
Code...
Why is it reading specs from lib64? code...
I've just installed a Slackware64-13.0 test machine with alienBOB's multilib packages. I'm running the stock kernel generic-2.6.29.6 with an initrd set up using mkinitrd.confEverything is fine except that I cannot build a right initrd for kernels 2.6.30, both the /testing one or a custom build: if I try, it will panic at boot with the "couldn't find a valid RAM disk image" error.On the same hardware, without multilib support, I was able to correctly build and boot 2.6.30 initrds.
View 11 Replies View RelatedIs the future Slackware release 13.1 going to be default multilib...?
View 14 Replies View RelatedBeen thinking about changing over to 64 bit, but I was just curious about whether or not I'll have to worry about incompatibility with a few 32bit-only applications I use, once I've set up multilib. I'll test it out in vbox when I get home but I wanted to check here to see if I could maybe get a solid yes/no/maybe answer.
View 14 Replies View RelatedI bought a new laptop HP Pavillion dv3-4170ee that has Core i5 2.53ghz dual core with hyper threading, intel hd graphics and Ati Radeon HD 5470 512 mb dedicated. It came with windows 7 64bit. It also has 6 gb ram(2gb in first slot + 4 gb in the second one).I installed slackware 13.37 64 bit. It installed just fine. installed lilo onto mbr. When it boots up it shows the slackware screen. I am able to boot into windows just fine. When I select Linux it boots into linux bios data check successful. lots of stuff goes on the screen the normal linux boot stuff. and then it goes to the next screen and stays blank
Nothing happens and even the hard disk light is not blinking.By the way the HDD is Western Digital.
I'm getting ready to install Slackware64_13.1 (finally), and I may then install Eric's multilib packages. The slackbuild for Wine at Slackbuilds.org states:
[code]...
has anyone built WINE with the 32-bit compatibility packages? Does it work?