Fedora :: 11 + Nvidia Driver Not Working?
Oct 6, 2009
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
View 8 Replies
ADVERTISEMENT
Nov 20, 2009
I used leighs post to install the nvidia driver for Fedora 12 and now plymouth does not work it uses the text theme. Right before it goes into the text theme I get this message:
"Unknown boot option `nouveau.modeset=0' : ignoring"
View 14 Replies
View Related
Feb 20, 2010
To use games and other intensive applications, but with the switch I completely lost control of the brightness for the monitor. Is their a way to configure that, through the terminal or external application. If not, is there an experimental 3d version of nouveau I could try. Help would be appreciated, everything else works great so far.
View 2 Replies
View Related
May 30, 2011
I am using the akmod nvidia driver and I have the option for "sync to vblank" checked, however when running minecraft my computer is still pulling 200+ fps and it's causing tearing like a beast.Is anyone else having this problem? I don't know if my drivers are corrupted, set up improperly, or if the driver is just broken.
View 1 Replies
View Related
Jan 28, 2009
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
View 14 Replies
View Related
Mar 19, 2009
I have set this up before (ie installed the drivers and had them working perfectly) but had to do a system wide re-install of fedora. Since this clean install, I've had non-stop grief with nVidia drivers. They have been downloaded and installed via yum, and on start-up nvidia.ko loads. But from with gnome I cant gain access to any 'special effects' (ie desktop effects wont enable).
View 4 Replies
View Related
Sep 18, 2010
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
View 3 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Nov 17, 2010
Pretty self explanatory, I can't get the NVidia driver to work with my laptop's 310M. And yes I have tried both steps in .64&postcount=9, but to no avail. The two error messges I'm seeing are "(EE) No devices detected." and "Fatal server error: no screens found".
View 3 Replies
View Related
Feb 8, 2011
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]...
View 11 Replies
View Related
Aug 23, 2010
My problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.
View 6 Replies
View Related
Nov 1, 2010
I recently downloaded and installed Ubuntu 10.10. I thought it was awesome...still do. OK, the problem is i was prompted to install some proprietary drivers and so i did but thats when the problems started. After reboot i couldn't get the GUI or gdm (not sure what to refer it to) to work. It goes directly to a terminal screen every time so i actually reinstalled Ubuntu and tried installing the drivers all different ways but no luck. i also can get into recovery mode and do low graphics. the driver version im trying to get working is nvidia 260.19.12. my graphics card is a geforce 7 series cant remember the number i have a 32bit processor.
View 9 Replies
View Related
Nov 11, 2010
I upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
View 1 Replies
View Related
Nov 26, 2010
I used Gefoce9400GT , 190.53 nvidia driver, configuring Mulitiple X screen both CRT and TV, work fine if CRT and TV connected to card, but I hope foce TV-out output signal, means that if not connected to TV, the SVIDEO can output signal. Because the line too far, cannot detect TV connection, so I think foce output TV-out signal. I used Option "ConnectedMonitor" "CRT, TV". Can force found 2 display device, have 2 screen ok, but not display at TV if not connected TV. I do not understand why the TV has been forced output signal does not display images, they can be connected to the TV show?
View 2 Replies
View Related
Mar 19, 2011
About a month ago, I decided to go deeper in my Linux knowledge. I've been reading a lot and found out that Arch linux would be my learning distro. As I was installing Arch, it was a pain at first but I really learned a lot which I would never ever learn with Mint. Now I decided to take a step further is which "compiling your own kernel".
MY PROBLEM:
Everything was smooth in my Arch for a 2 weeks until I decided to compile my own kernel. I currently have a Nvidia GTX 460 1GB card.
BTW, the method I used to install nvidia with 2.6.37 was
Code:
pacman -S nvidia nvidia-utils
and that worked with all of the .37 kernels (-1 -2 -3 -4) which was download from kernel.org.
When I compiled the .38 (using the same .config of .37), it just boots up to the terminal (not loading gdm). However, I could still login by typing my username and password. So I've checked dmesg of both .37 and .38 and noticed that the Nvidia driver is not loaded in .38.
I tried reinstall it by running pacman and it doesn't do anything. It was thinking of uninstalling nvidia and nvidia-utils but there are so many dependencies conflicts (like screensaver, compiz, etc).
Since, I didn't want to mess up my .37 install, I just grabbed an old HDD and installed from scratch again. This time, I compiled the .38 kernel first (without gui) and then installed nvidia nvidia-utils. It was the same problem.
With this observation, I'm concluding that the nvidia and nvidia-utils from pacman is not compatible with .38.
I've read that I have to wait for nvidia to release a driver that will be compatible with the .38 kernel. Is that true? Does it mean I have to wait for nvidia/nvidia-utils to be updated from pacman? How would I know when it is updated?
I've also read about nouveau, but I guess that is not for me because it doesn't support 3D.
Is there a work around for me to use nvidia/nvidia-utils with .38?
Is nvidia and nvidia-utils proprietary drivers? What is the difference with these two and the one you download directly from nvidia?
First of all, I apologize for the bombardment of questions. As you can tell, I'm so clueless on how nvidia drivers work on linux in general (since it was spoon fed by mint) and I really would love to learn about this is a deeper level. Could someone please explain to me (LAYMANS terms) how nvidia works (and possibly a solution to my issue).
EDIT: Additional info - I have a netbook that also runs arch. It uses an Intel GMA integrated video chip which I used "xf86-video-intel" from pacman and I believe since it is open source, it works with .38 fine. So does that mean if you use an open source driver, it will work with all other kernels?
View 6 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Mar 15, 2010
I have a Dell XPS M1330, which has a GeForce 8400M GS GPU. The binary (sigh) nVidia driver installed is version 190.53 (installed by sgfxi). This is working well: glxgears gives me about 2600 FPS and compiz is happy.An old Philips 170B is attached by VGA cable. I was looking to set up a method of switching resolution upon connecting to the monitor when working at the desk, since I don't like the 1280x800 resolution of the laptop.
nfortunately, I can't get any output on the external monitor. It does work under Ubuntu, which installed the 180 series binary driver. (Going to an earlier driver is an option, but I want to understand the problem.) Bottom line, I want to work under Debian.As far as I know, nVidia's proprietary driver doesn't support xrandr. At any rate, with he external 170B monitor attached and turned on, I get the following:$ xrandr -qScreen 0: minimum 320 x 175, current 1280 x 800, maximum 1280 x 800default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0*
1024x768 51.0 52.0
960x540 53.0
[code]...
View 2 Replies
View Related
Feb 12, 2011
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
View 9 Replies
View Related
Mar 11, 2011
I am running the newest Nvidia driver from nvidia.com, version 260.19.44. The built in proprietary Nvidia driver does not work properly.
Recently ubuntu was updated to a newer kernel 2.6.35.27 from 2.6.35.25. Under 2.6.35.25 the driver is working. Under 2.6.35.27 the desktop is not starting, and I can login to a 'console'. After login i try to run startx, and gets some errors. See attached Xorg.0.log.
View 3 Replies
View Related
May 5, 2011
I'm trying to create a flash drive that I can use on my laptop to boot into ubuntu. I followed the instructions on the download page to create le usb drive and was successful.My problem is that whenever i install my nvidia drivers, my internet completely stops working. Both wired and wireless work fine on a fresh install. I can reboot and try again and they both still work. While installing the nvidia drivers however they both stop working, and upon a reboot they still aren't working. I can connect via my desktop and my phone to the same access point i'm trying to go through on my laptop, so the problem is isolated to my laptop.
View 1 Replies
View Related
Sep 8, 2010
what the prepackaged proprietary nvidia driver is missing to run compiled OpenCL programs.
I have the pre-packaged proprietary nvidia driver from [URL] and the package is missing some files, like lobOpenCL.so, which I extracted from the .run file and put manually in the /usr/lib64 directory toether with creating some symlinks. I can compile my opencl programs fine (C | // // File: hello.c // - Anonymous - 3BF2vDzc - [URL], Getting started with OpenCL and GPU Computing), but when I run, the firsr opencl-related function clGetPlatformIDs returns an error code.
Again, I try to figure out what the prepackaged driver is missing. If I use the nvidia .run script driver, the problem probably does not exist. CUDA executables run fine (compiled on an other opensuse machine without nvidia card)
opensuse 11.1 64bit, nvidia quadrofx3700 driver version 256.53
View 1 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Jan 22, 2010
I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
[Code]...
View 2 Replies
View Related
Feb 9, 2010
I've installed the nvidia driver from nvidia website. I don't want to mess up my system So my question is how can I uninstall this nvidia driver? (I want to install the one from youm repo)
And my second question - when I'll be installing my nvidia drivers from repo, this is the best way to go: [URL]
View 7 Replies
View Related
Nov 24, 2010
I'm somewhat new to Fedora but not Linux in general. I went to install the nvidia driver as per any instructions I found on the internet that yielded results. I typed sudo yum install kmod-nvidia and eventually got a driver, blacklisted nouveau, restarted, and finally got compiz and all my desktop effects.
The problem was when I played Minecraft, which for those who don't know is a game, from a .jar file. After ~5 minutes of playing something happens and everything freezes. Video completely stops but I still have mouse control and sound(at least for anything already running). Clicking stuff does nothing and no hotkeys work to bring up anything at all. I end up having to do a reset by hand to get anything done. Turning off desktop effects didn't help.
Why is this? Did I install the wrong driver, even though kmod-nvidia should find the right one on it's own? nvidia 8800 GT is my card. Could it be the java program screwing things up royally? I can't remember if the program worked fine on it's own before the driver install, but uninstalling the driver now causes the game to fail on launch, which I guess makes sense but can't figure out if it's simply the lack of driver or if removing the driver screwed something else up. I might just reinstall fedora and start from scratch again, but before I did that I wanted to find out if I'm just installing the wrong driver and can simply find teh right one to fix all of this.
View 8 Replies
View Related
Dec 16, 2010
I am stuck with Fedora 13 due to the fact that clutter has some nasty bug which colides with the nvidia binary blob driver (I _require_ CUDA _and_ usable 2D/3D). So the new version is out since some days ago but not yet in rpmfusion. So did anyone give 260.19.29 a shot and does the 2D/3D UI still lag?
View 14 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Aug 10, 2009
I installed F11, before today, I used Ubuntu for a long time. my graphic card is nvs140m of nvidia. I download the card driver from [URL]. the vision of the driver is NVIDIA-Linux-x86-185.18.29-pkg1.run. before I can install the driver, I must close the X-server. so, please tell me how to close the X-server.
View 4 Replies
View Related
Dec 22, 2009
I have trouble installing the nvidia 8800gt driver on Fedora 12.It keeps on asking me to exit the x-window, but how?
View 10 Replies
View Related
Mar 11, 2010
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
View 14 Replies
View Related
