Ubuntu Networking :: Wired Ethernet Not Working On Compaq Presario 6310
Jun 13, 2010
I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
I have an older Compaq Presario S6000CL, specs for it are here:
*Product Specifications Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)
Motherboard and bios here:
*Motherboard Specifications, A7V8X-LA (Kamet 2) Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)
I am trying to get SME Server set up as a private server/gateway. Problem is no matter what I do I can only get one ethernet working at a time and only to the internet, not the local network. I tried both SME Server 7.4 and 8.0 beta 5 witht he same result. Now of course I checked the ethernet cards. The two I have now on it do work. One of them is the onboard ethernet the other one is in the second pci slot. They jsut don't work at the same time. (also I am familiar with SME and I had it configured correctly. Even if I messed up the order of the cards it is easy enough to just get up and switch the cables, reboot, etc.) I thought maybe there was a jumper setting or an over ride of some sort to let me use two ethernet cards. <I previously had all of this set up with an old HP computer (came with windows 98 originally.) But that computer decided it was time to retire to the road side.> It seems that it should just work. Any ideas on what I am missing or what I can do?
Edit:Spent another hour trying to get it to work and still nothing. It is picking up both ethernet cards just fine, I just updated sme 8 beta5 so the internet is working fine. I just can't get the local ethernet card to do anything at all, even though it is showing up as a green ok at boot. I checked the bios and I am not seeing anything there. It had an option to enable/disable LAN (which is enabled but I tried both and using to PCI ethernet cards. Didn't do anything different.) It has a Local LAN boot rom option, tried it enabled and disabled (Disabled now.) and nothing. I turned off the serial and parallel ports (doesn't make a difference either way.) I looked all over the motherboard and the only thing I can find is the jumper to reset the password. If a computer that was at least 12 years old could run SME and don't see why this one can't, it is half that age and a much better computer hardware wise.
On friday (5-28-10) I installed ubuntu 10.04 Lucid, and everything was just peachy, wireless worked and everything.Today (saturday 5-29-10) booted up to find that my wireless wouldn't work. I plugged up to Ethernet and that worked fine, i updated and everything, still no wireless. I google the problem, and have tried everything under the sun to get this darn wireless card to work. I'm pretty sure it's atheros but i am not sure. when i go to system -> admin -> hardware and drivers nothing shows up
I just installed helena on my compaq presario cq61-223sa but i can't get the altec Lansing speakers to work and my internal mic as well. I'm fairly new at linux and have tried looking for drivers but i couldn't find any.
I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.
I recently purchased a Conexant USB modem to use in my Compaq Presario M2000 laptop. (The laptop already has a built-in modem that's really a Winmodem. )I plugged it in, installed the driver, and it found the built-in modem....but not the USB modem. I'm looking for commands and packages I can try to further diagnose and rectify this problem. This would be a nice-to-have so I don't have to boot up Windows on the laptop just to be able to use the modem in places that don't have wired or wireless internet.
I installed Fedora 12 on my Compaq Presario c700 Notebook recently and had a great install. I installed ndiswrapper and installed the inf file for my broadcom 4311 driver through ndiswrapper as well. The installation of the driver appeared to go smoothly.
The only thing is that I still cannot connect to the internet. I aliased the driver as well to wlan0. I can not figure out what is currently the problem. I tried reinstalling the driver and I keep receive a message stating the driver is already installed.
I have a Compaq Presario CQ60 laptop and have one of those wireless light indicators. For me the light glows orange when the wireless is OFF and blue when the wireless is ON. In Ubuntu 9.10 (Karmic) the light was always orange, even if the Wireless was on, but my wireless worked right out of the box so I was grateful for that, but since upgrading to Ubuntu 10.04 (Lucid) I've noticed that my wireless light alternates between orange and blue frequently and sometimes flashes madly when wireless activity is occurring.
I was wondering if there is a fix for this as it can get quite annoying, the light sometimes stays blue for a while but will ultimately keep going back to orange and vice-versa, my friend who also has a Compaq Presario CQ61 (Revised model of mine) has his wireless light constantly blinking orange and blue no matter what.The wireless itself works fine, I can connect to any wireless connection and use it without having to install anything else, so it does work out of the box, which again, I'm grateful for.The wireless adapter is a Atheros AR5001 Wireless network adapter. Do I need to install additional packages or drivers to get the wireless adapter to work properly?
After upgrading from karmic to lucid yesterday made my RTL 8111 -network card die. It's integrated on Intel D510mo mini-itx board.
After some googling I found out a lot of forumposts about the same problem from year 2007, but the troubles seem to disappear on the newer versions and seem to be back now? With those posts I managed to get the link up by using ethtool by setting autoneg off and setting speed to be 10mbps and half duplex. Any other speed/duplex combination fails.
One suggestion I found was to install r8168-driver from Realtek instead of the r8169. It didn't help, result was very much the same.
I booted to 9.10 live-cd and there the network worked as intended (100Mbps, I dont have a gigabit switch)
I really wouldn't like to fall back to 9.10, but my file server is not very usable with 10mbps.
I just finished putting openSUSE 11.4 on my Compaq Presario V5000. I have been trying for hours to find the answer of how to get my wireless card to work. I can't connect to my router wirelessly and the on/off button for the wireless mode does not light up when pressed.
As far as I can tell from what I have already tried, I have a broadcoamm wireless card. It is a bm4318. I have b43-fwcutter installed and I have tried updating my firmware through the terminal. I have also used 'sudo /usr/sbin/install_bcm43xx_firmware'. It appeared successful, but the laptop still cannot make a wireless connection.
The netbook wired internet was working fine UNTIL I reset the internet modem! and then it no longer was able to connect to the internet.
I read several threads and did sudo lshw -C network
It said network disabled ethernet interface Atheros AR8132 lic gigabit ethernet adapter physical id 0 bus info pci@0000 :02:00.0 sonia@sonia-laptop:~$ sudo lshw -C network [sudo] password for sonia: *-network
After using Ubuntu for a while I have decided I wanted to do a fresh install onto my PC, however being rather old it (about 6 years old), It seems I cannot get any recent kernels to run on the system. As such, I cannot get the live CD to boot. After searching for hours to find a solution I have found nothing.
Upgrading also breaks the system as well, So to do so wouldn't work.[URL].. with addition of a 256MB RAM chip and starting with a 512 rather then the 256 stated on the page. and a ATI Radeon 9800.
Is there anyway I can get newer kernels/Live CD to boot? I've tried all options i've found in other threads but no go.
I'm new in this, but i'm rellay starting to enjoy linux. But, i have one huge problem, that is really important for me. When i plug a HDMI cable in my computer, it doesnt show any pictures on my TV. In nVidia controlpanel it shows in Xserver Display configuration. I tryed to check the "TwinView" box, but it still doesnt work. Here's som info that i learned was important to get help:
I'm trying to install Lubuntu 11.04 CD on a Compaq Presario M2000 Laptop to replace XP. Processor: Intel Pentium Celeron M RAM: 256mb Existing O/S XP SP3 (boots & runs but is very slow) Hard Drive 40GB (28Gb free)
Installation hangs about 1 minute after selecting language in both try Lubuntu & install Lubuntu modes. Have also left the laptop running all night to see if it was just a slow install. Have tried various other disks (Xbuntu, Puppy, Mint, Lubuntu 10.04), which have worked on other PC/laptops ok, but all stall after the language settings. Have tried burning the Lunbuntu iso with both Windows & Ubuntu at slow speeds & have verified the burnt iso. The laptop BIOS cannot be set to boot from usb, so an external CD or USB stick installation may not work? The BIOS has been updated to the latest one on the Compaq web site this morning. Although I have installed a few flavours of Linux on various hardware, I'm still a real Linux newbie. Can Lubuntu be installed within Windows, but still format the hard drive to ext2/3 ?
New member here. Was introduced to Ubuntu by the IT guy at my last place of work and liked it so much, I ran WUBI on my laptop for a couple of months before taking the plunge and today fully converting my Compaq Presario CQ56 Laptop to the full Ubuntu OS.
The only issue I have is I have no sound whatsoever. I have seen some suggestions where you should check the hardware drivers and when I do that the only driver that appears is for ATI/AMD proprietary FGLRX graphics driver. It also says this driver is active and currently in use.
So, can anyone else offer some help. I love the system and the way it does everything but it needs sound. Incidentally when I ran WUBI (while Windows 7 was on there) I did not have a problem with the sound!
i'm trying to install avira av on a compaq presario sr1103wm with lucid lynx. i've tried using the archive manager, but i end up with a package on the desktop that i don't know what to do with. i've also followed techie mo's tutorial to the best of my ability. i just seem to have come up short. below is the output of the terminal. it shows SOME promise, just not an end result.
ed@ed-desktop:~$ sudo su [sudo] password for ed: root@ed-desktop:/home/ed# cd Desktop root@ed-desktop:/home/ed/Desktop# tar -xvf antivir-workstation-pers.tar.gz antivir-workstation-pers-2.1.12-19/
is there a program or something to enable my presario 2100 to read a linksy's program disc? the disk says it should run automatically, but the comp keeps sending an error message that its either a multi-part drive? or its a zipfile and it cannot recognize.
I have an old compaq presario 2100 (amd athlon) laptop that came with windows xp. it can't deal with xp any more so i put mandriva on it and let my mother in law use it for card games. now it won't even boot mandriva.
it says something about a 1720 SMART error. i ran the hdd test and it gave me a code: 1# imminent failure.
it will run mandriva off the install disk but I want to make this as easy as possible for my mother in law to play her games. I don't think she'd like to deal with all the steps involved with running it off the install disk. the problem with that is that the install wizard runs every time i turn it on.
will i be able to do something to the effect that my mother in law will be able to easily boot up and play her card games on the laptop?
I've got a new HP Compaq Mini 110c-1110SD. I've booted Ubuntu UNR 10.04 Beta2 from a USB stick and at first it seemed like everything worked so I installed it (dual boot with the installed Win XP which works fine, no network problems)
But .. I forgot to check if internet worked. Since I don't have a wireless, I plugged in a cable and the Auto eth0 showed up as connected.
Looks good, but I can't get internet to work. Local browsing on my LAN works ok, but getting on the internet doesn't work neither does apt-get so updating is a problem too. Strangely enough, ping does work ...
I thought it had to do with UNR being a beta, so I've booted from a live UNR 9.10 usb stick, but same problem, no wired internet.
I'm totally stumped. I've been running Ubuntu since 2007 on several PC's and never had any problems with networking.