after i installed compiz, and enable compiz. a problem happen... my firefox (3.6.3) display it's kinda odd, it's like the firefox graphics has been cutted every i move to another tab, this problem occur too when i scroll the web page (the graphics cutted).
View 7 RepliesI used the zypper dup tool to upgrade my HP Pavilion dv6000 laptop and my display is now broken into columns and partially obscured. I can barely see anything on it. When I ran zypper it stopped about half way and locked up.I then ran it again to completion. At boot, GRUB gives me my startup options as before and is clearly readable with good resolution. When I select openSuse to start it, the screen goes blank for a few seconds and then comes back with the screen problems.
The problem continues all the way into KDE. I have approximately four columns displayed but I can barely see anything. Most of the lower half of what should be displayed is obscured so I cannot load any applications. If I right click, I can make out the dialog box and select the run command. From there I reran the zypper command using the 'zypper up rpm' option and it says "nothing to do" and the "highest update version is already installed."
The display problem also exists if I use the failsafe boot option. I remember having to download nVidia driver last year to get a better resolution, but 11.2 (64 bit) worked great until the repositories stopped working and I no longer was able to load software. Now I can't use the computer to download and burn a DVD version of 11.4. Again, I do seem to be able to use the terminal, so I could presumably fix something with it if I had the right commands and I do seem to have access to the repositories.
Im using FF 3.5.2 and Slackware 12.2. On certain web pages, for instance www.slackware.com, Firefox doesnt display the background image, but instead displays multiple images of the tool bar of Firefox. It doesnt matter if I change the settings to allow third part cookies or if I tell Firefox to get images automatically. When using Konqueror, the web-site(s) appear normal.
View 5 Replies View RelatedRecently I was creating an image in GIMP when I needed to add a new font. I went to my mounted XP drive and copied the file I wanted over into /usr/X11R6/share/fonts/TTF then I went to the font installer as root and installed the font system wide. After that I reloaded GIMP and the font was available. A little while later I went to browse the internet and when I loaded up firefox, it showed a properly formatted and spaced page with no text on it at all. If I highlighted a line, the invisible text would copy to the clipboard properly and I could read it that way. I figured it might've been a just a FF issue, but when I loaded up Seamonkey, I wound up with the same problem. I'm using Firefox 3.0.16 and Seamonkey 2.0.1. I tried going into the preferences and changing the default font, but no matter what I change it to, it doesn't fix it. Slack 1.2 running kernel 2.6.27.31-smp. I use slapt-get to stay up to date and as far as I can tell i have the latest patches and pkgs.
Code:
bash-3.1$ fc-cache -rv
/usr/share/fonts/OTF: caching, new cache contents: 23 fonts, 0 dirs
/usr/share/fonts/TTF: caching, new cache contents: 91 fonts, 0 dirs
/usr/share/fonts/Type1: caching, new cache contents: 64 fonts, 0 dirs
[code]....
I am using firefox 3.6.18 in Ubuntu 10.04. My problem is that if I try to save some webpage in postscript or pdf format, I go to file>print>print-to-file option and choose output file as ps or pdf format. Now if I click to print, I do get the corresponding page saved in ps/pdf format but only the first page is printed(i.e., saved in ps/pdf format) this way, leaving major portion(may be eight pages for example) of the corresponding webpage unsaved. (the option: range of printing: all pages is chosen by default.) Why is this happening and what should I do to print the entire page? (one example is the following page which you may try to save in the way I described above: [url]
View 2 Replies View RelatedI am new to Fedora. I just put it on my H.P AMD Quad core machine. I have eight gigs of ram and plenty of storage. I loaded it into Microsoft Virtual PC, and it boots fine and seems to work ok in tty1. I am a cit student at a community college and seem to get little to no support from my teacher who is teaching a beginning course on Linux. He told me to ask here. When I use ctrl-alt-f2 or f3-f4 and so on all the way up the levels, I got green lines across the screen, as if the graphics card is not working. I have 23 inch monitor and a Nvidia 9500 GT ddr3 512mb graphics card that I installed after I bought the computer. My host operating system is Windows 7 , and is working fine. I am now two weeks behind on labs for this class and getting nervous, I need to be able to go to tty2 to do these labs.
View 1 Replies View RelatedI am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
Right now I'm running Jaunty with Firefox 3.0. That's what it comes with. I tried adding FF3.6 using some instructions, adding the repository etc.. But, that was aimed at Karmic users and it triggured all sorts of dependency errors in Synaptic. So things got a bit screwed up. God knows what version I have installed now but it sure isn't 3.6! So tomorrow I plan to do a clean install of of Jaunty. Then I'd like to upgrade to Firefox 3.6. What is the correct and clean way of doing that, adding the correct repository this time? I want to replace 3.0 with 3.6 not have both versions on my system.
View 4 Replies View RelatedUbuntu 10.10 - Flash 10 plugin - Firefox 3.6.12 (all latest versions of their kind). When I try to play programs from BBC iPlayer website, the message on the screen informs me that I don't have the correct Flash plug-in, I follow the links to download this, but of course my computer does have Flash 10 plug-in already installed. I have tried removing this and reinstalling both from the website link and from Ubuntu repository, but still cannot convince Firefox that I do indeed have the necessary Flash plug-in.
View 4 Replies View RelatedHaving issues with external display, I have to start compiz everytime I log in
View 2 Replies View RelatedI am using Firefox 4. It came preinstalled with Linux Mint 11. I have added my own tweaked prefs.js (contains all about:config changes). Firefox 4 underscore spelling mistakes in red but I cant right click to auto correct them! I renamed .mozilla to .mozilla.old and started FF and this solved it. However is there another way to fix this? I have all my addons and about:config settings just as I like them and don't want to start all over again.
View 4 Replies View RelatedI'm testing HTML5 for the first time, using Firefox (beta) 4.0b8 and SeaMonkey (beta) 2.1b1, and its ignoring some CSS. Specifically, I have problems with the <details> tag. (It is nested in a paragraph...I am using it to provide an in-paragraph definition in hopes it can be toggled.)
Firefox only partly supports <details>. It's not supposed to show anything except the content of <summary>, unless you click on <summary>'s content. Instead, it puts a line break before the content of <details>, splitting the paragraph in two peices (which looks silly), without the "closed/open" functionality.
So I tried using "display:inline" in my CSS, but that gets ignored. Just for fun, I also tried "display:hidden" (also ignored) and "display:none" (obeyed).
SeaMonkey doesn't doesn't do anything special with the content of <display>...but it also ignores the same CSS as Firefox.
The only thing I can do to support semantic design is apply "font-style:italic" to all <details> elements.
Granted, you might ask, "why bother using <details> at all. then?" Well, I would like to have <details> for the browsers that support it, with the "font-style:italic" to degrade the page nicely for those that don't (such as for SeaMonkey).
Does anyone know why "display:inline" and "display:hidden" get ignored?
It is no longer running my default when I log in it did go screwy yesterday I reinstalled my nvidia driver and it started allowing to to activate it. This is what it was saying:
Code:
compiz (core) - Fatal: No valid GL extensions string found.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Installed Natty a few days ago and everything was working fine. I have a dual head setup with the left monitor rotated Clockwise 90 degrees (AKA rotate left). When I setup the the displays properly, instead of just cloning, I noticed a problem, making Unity unusable. When I apply the rotation either in the xorg.conf fle or using xrandr, the display shows a corrupt looking image. When I turn compiz off and use metacity instead it works perfectly fine.
Display Adapter:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Cedar PRO [Radeon HD 5450]
xorg.conf:
Code:
Section "ServerLayout"
Identifier "Desktop"
Screen "RightScreen"
Screen "LeftScreen" LeftOf "RightScreen"
[code]....
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies View Relatedwhat is the correct permission for mysql directory under /var/lib directory? I set permission using: Code: chmod 755 mysql but got permission deny error. What is the best setting permission for this directory so that I won't jeopardize security?
View 4 Replies View RelatedI tarred my system (NVidia based) and restored it on 2 other different machines. (Intel g965 and SIS 661/741/760) On both of them I see
Code:
$ sudo lshw -C display *-display UNCLAIMED As a result I can't enable compiz (visual effects), cairo dock is unusable (noGL version, GL won't run at all) - it shows a huge black rectangle as its background even when the dock is hidden. I think the problem is that the video driver is not enabled, I need your help making it work. After the restore during the 1st boot X complained that it can't find NVidia and showed me the options use default settings generate new settings (I used this one) So now one of the PCs:
[Code]...
I have a number of CentOS 5.5 virtual machines running on VMware ESXi 4. Most of them are fine, but one of them has the incorrect time and no matter what I try I can't get it to display properly. The time seems to be 15 hours behind and I think that might be because the original source virtual machine was an appliance built in Canada and my timezone is Australia/Sydney.
/etc/sysconfig/clock:
UTC=true
ARC=false
ZONE="Australia/Sydney"
[Code]...
I thought that was all of the settings I needed to make. Is there something else I've missed? Why can't I get the time right?
I am a complete noob in the Linux community, having JUST installed my first Linux distro on my PC (that being Slackware 13.37).That having been said, please be patient with my TOTAL confusion is this regard : How do I determine which version of a package I need to download (in this example, I will use Yakuake, a program I AM trying to find at the moment!). I have done searches on the internet of the type"Yakuake for Slackware", etc., and I have always found results that I believed were a link to the correct version. However, when I finally have the package downloaded (I have downloaded BOTH source packages as
well as the build app.), they are always for a DIFFERENT VERSION!
This is most frustrating...; is there a "listing" of different packages that are compatible with a specific distro / version? I realize that, in many cases, I may require a newer version of a library, etc., but again, how do I determine this ahead of time, before I bother downloading the actual app. I wish to install? I can use another example - I attempted to install OpenOffice; I began by searching for OpenOffice for Slackware / KDE (as some sources indicated that Gnome was the required gui for this package...).I found a site with an install cd .iso that was supposed to be multi-platform KDE compatible, but NONE of the versions would install on Slackware 13.37... - you get my point?
I've blown a couple of DVDs trying to burn them with correct file masks (directories and files are read-only). There doesn't seem to be any documentation for K3b (building the index doesn't do squat and the help says "The file or folder help:/k3b/index.html does not exist"). I can't seem to figure out a setting that simply copies everything the "way it is."
View 7 Replies View RelatedTo clarify: I have two kernels, (a) one that "works" and (b) another that I am experimenting with. Each has it's own modules directory tree (in /lib/modules) and they are mutually incompatible ie kernel (a) will only work with module tree (a) and similarly for (b). I have two boot entries in lilo.conf which can be selected from the boot menu.
Now the problem is, what if something goes wrong when I boot to (b)? I'd like to be able to return to the safe option (a), but the current module tree is (b) and it won't work with kernel (a). I could use the Slack installationCD and rename the module directory (I presume this would work)but is there a simpler way, whereby I can select the correct module tree at boot time (or set it in lilo.conf)?
I recently built a new computer and moved over my old graphics card, a nVidia GTX 275. Everything appeared to work fine, it booted with no drama etc.
I use my computer for work and gaming, all my work, web browsing, chat etc happens on Debian. I play games on Windows 7.I did a fresh Debian install on this box and everything went smoothly until starting xdm for the first time, it wouldn't go to a higher resolution than 640x480. I'd already installed the proprietary nVidia drivers and they appeared to be working fine, just at the wrong resolution.
I'll post the entire code here, and then specifically highlight what is just failing in a fashion I'm apparently incapable of fixing a few hours later:
Code:
#!/usr/bin/expect
# The script should be called with a file in the directory called sshServerList
# That file has the following format:
# Line # | Contents of line
[code]....
I've had all kinds of different results and problems, but I've never been able to successfully log into multiple servers, though the first server in the list most times works okay (though might not on this iteration). I'm a bit hack and slash and I would be very greatful not only for a solution, but any tips on how I should have done this and places where I could clean up my code.
What I really want to do is compile an apache version that uses the same layout as the version included with CentOS. I can not however find the correct layout.conf file. The one from the Apache Source doesn't have a REHL or CentOS option.
View 10 Replies View RelatedI have recently done a clean install of Lucid Lynx and set everything up the way I had it in Jaunty (skipped Karmic). However, I am now having problems with the Compiz Cube and Firefox 3.6.
Whenever I rotate my workspace that contains a Firefox window that is active, the animation is very jerky and slow. It is fine if Firefox is a background window. This was never a problem in Jaunty with Firefox 3.0.
Is anyone else having this problem? Does anyone know how I might be able to fix it? I have tried disabling all addons in Firefox.
My PC: Core 2 Duo E7400, Geforce 7010 (onboard), 2GB RAM
UPDATE: starting Firefox in Safe Mode seems to help a little. Not sure why though...
i have a problem with my slack box.i want an eye candy desktop (actually i didn't need this, but i want to show my friends that linux distro eye candy desktop can beat windows).I'm using KDE desktop effect, but i didn't satisfy with this, cause i have been test compiz in my PC (using ubuntu), the effects is more smooth than KDE desktop effect.my Xorg config is using vesa (i didn't know that linux kernel didn't have my 'Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)' driver. How do i enable the driver? (cause in ubuntu, works like a charms)in my slack box compiz version : compiz-0.8.6-i486-1 how do i enable compiz (cause i want to use XFCE + compiz too)
View 12 Replies View RelatedI have ati radeon hd2400, I downloaded drivers from ati's site and install it on mu laptop. How to install compiz on Slackware 13.1 (x64)?
View 5 Replies View RelatedI have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...
export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I was just wondering about something. I have linked the middle click to initiate the cube rotation and it works perfectly except when I have the cursor on firefox. Then it just acts like I middleclicked in firefox itself. Personally I like this behaviour but was wondering why it is JUST firefox that has it. Would be great if I could achieve the same in Blender
View 4 Replies View Relatedi installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example
Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?