Slackware :: Blowing Out Windows - PC Boots For Ever After?
Mar 2, 2011
I would like to get rid of windows XP from my laptop. I have CloneZilla images of my root & home partitions. I have just recently scrapped Grub and switched to LILO installed to the MBR. Here are my questions:Because I installed LILO to the MBR, should I reinstall it to my Slackware root partition (or somewhere else) prior to blowing out the XP partition where, I assume, the MBR is living? Once I repartition my disk for Slackware only and 'Clonezilla back' my root and home partitions, how do I boot into Slackware? Once I successfully boot into Slackware, what do I do with LILO so that my PC boots into Slackware for ever after?
View 20 Replies
ADVERTISEMENT
Sep 12, 2010
Fedora 12 works well on my Acer 5920g laptop. However, about 5 minutes after switch-on, the fan comes on. Especially since the sensor output shows the system is still very cool:
[code]...
Once on, the fan almost never turns off. The system is not loaded at all, almost totally idle according to top.
View 9 Replies
View Related
Dec 31, 2010
[code]...
this is the error i get building gobject-introspection.
View 1 Replies
View Related
Sep 30, 2010
I have had my computer set to dual boot Windows 7 for months now with no issue. Now today when I logged on to Slackware (13.1 x86_64) it suddenly stopped recognizing that my Windows 7 drive has anything on it. Fdisk cannot see any partitions anymore. Yet I can reboot the computer and run Windows 7 off it just fine. The windows drive should be /dev/sdb with sdb1 being its system reserved partition and sdb2 being the actual Windows partition.
Dmesg sees that it is there like my other drives, but it appears that the Windows 7 partition is not unaccessable to anything in Linux.
How could this work yesterday yet today it doesn't? I didn't change anything.
View 7 Replies
View Related
Aug 4, 2010
I've recently swapped from Windows 7 to Ubuntu Lucid Lynx and I haven't looked back - except for the fact that moving from Photoshop to GIMP is difficult. I digress.
Suspend works nicely (what a blessing ) but Hibernate doesn't.
Ubuntu 10.04 is installed on a 500GB Seagate External hard drive plugged into a USB port on my motherboard. My BIOS is set to boot off of it automatically (boot order). Windows 7 is installed on my 160GB () internal drive.
The problem is not when I put it into Hibernate, it's when I pull it out of hibernate. When I do my computer tries to unhibernate into Windows!
My hardware ($300 laptop from Walmart haha) - click here for more info on HP's site if you want
Model: Compaq Presario CQ60-419-wm
Video Card: Nvidia GeForce 8200M G
Processor: AMD Sempron () 2.1 GhZ
RAM: 3GB
OS it was shipped with: Vista Basic ()
View 9 Replies
View Related
Jan 25, 2011
Before we begin just some general information, I'm running on a 64-bit HP Pavilion dv6; This laptop is something you would buy off of best buy's show floor. I installed Ubuntu through wubi in windows 7. I have a 500 GB Hard Drive. As of right now I can explore the windows 7 part of the hard drive.Now the problem began on Friday January 21st after I shrunk my Windows parition by 100GBS leaving around 370 GBS left in windows. Then I went into Ubuntu to try and format the 100GBS to create a space so I can share media in between windows and Ubuntu. ( At the time I didn't realise I could already go into the Windows Partition).
View 9 Replies
View Related
Oct 18, 2010
I'm dual-booting Fedora Linux with windows7 and everything worked fine until now My problem now is that I did an upgrade on my windows and ever since,My system boots into windows automatically without giving me the option to choose which operating system to boot to via the GRUB prompt.I'm locked out of my Fedora by windows
View 3 Replies
View Related
Jun 30, 2010
I have a dual boot set up on my Dell Inspiron 1525 laptop I have Windows Vista originally installed and i installed RHEL 5 a while ago they used to sit happily together.However After upgrading RHEL 5 from 5.3 to 5.5 yesterday and configuring grub to boot into Vista by default it refuses to do that and boots into RHEL 5 by default.
The laptop used to boot straight into vista but i thought i,d learn how grub works by configuring it, after the rhel5 upgrade. But after changing the DEFAULT value from 0 to 1 and then back from 1 to 0 still grub only boots into RLinux RHEL 5 by default regardless. Can someone help me please i need to make my laptop boot straight into Windows Vista by default and not RHEL 5 This is what my grub.conf looks like
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
View 4 Replies
View Related
Jul 30, 2009
It mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies
View Related
Jul 16, 2010
I have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
View 6 Replies
View Related
Aug 9, 2011
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is:
# fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
View 8 Replies
View Related
Aug 6, 2010
I'm having an issue getting a triple-boot machine to work. I'm trying to triple-boot Mac OS X Snow Leopard (iAtkos S3) 32-bit, Ubuntu 10.04 64-bit, and Windows 7 Ultimate 64-bit. I install Mac with no issues it boots up and works. In Mac setup I make 4 partitions: Mac, Linux, Linux Swap, and Windows. After Mac is installed, I install Windows. Then Ubuntu. I select to have GRUB installed on the Linux partition. Now when I boot the PC I get a choice of Ubuntu, Windows, memtest, and Mac. Both Ubuntu and Mac work, but when I select Windows, I just get a black screen with a flashing cursor. Files are still intact and nothing has been deleted. I tried booting from the Windows CD, and running bootrec.exe /fixmbr, but all that gives me is no boot device available. I've tried every combination of installing and configuring but can't seem to get it to work. Everything is backed up so I don't mind reformatting and starting fresh if I need to. Also the Windows disk does see Windows 7 when I run scanOS. I can't use the repair option on the Windows disk as it gives me an error saying the CD is not compatible.
View 4 Replies
View Related
Jan 25, 2011
I deinstalled Ubuntu today. Just deleted the partitions etc and thought it would be fine, but now this weird grub thing is telling me:
error: no such partition
grub rescue>
I am at the end of my wits: I downloaded a liveCD, which will not boot. My XP cd boots but gets a blue screen afterwards I downloaded a windows 7 live cd which did not help either
Problem is, I can't load my bios anymore to change the boot order... Didn't even know Grub was part of linux...
Point is, I got a presentation tomorrow and all my important files are on that laptop. . . the setroot=(hd0,0) gives no response. I tried a bunch of other commands but I keep getting unknown command...
View 7 Replies
View Related
Mar 7, 2011
I successfully installed 10.10 dual booting with Win 7.Today I booted into Win7 and Windows insisted on running checkdisk. After about 10 minutes Windows booted. I then rebooted into Ubuntu. Unfortunately Ubuntu only boots into the command line now. Being very new to Linux I don't have any idea how to fix this.
View 2 Replies
View Related
May 8, 2011
I am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
View 5 Replies
View Related
May 12, 2011
I am not a computer genius. My laptop was notifying me of Windows Genuine Advantage, and I guess I am the last person on earth to know what that is. Now I can only boot in safe mode since it requests activation. There is nothing important on the computer and I only want to use it for watching movies at this time. I want to get rid of Windows altogether, and install Ubuntu. I have downloaded a copy of it and its on my removable drive. I do not have a disc drive on the laptop, only USB. How do I do this? I don't think I have a virtual drive anymore, I think I got rid of the program that was on there.
View 9 Replies
View Related
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
Nov 14, 2010
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
View 8 Replies
View Related
Mar 18, 2010
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
View 1 Replies
View Related
Jun 10, 2010
I have a dual boot system with Lucid Lynx and a Windows 7 that came with the laptop (it's a Dell Studio with an i3 processor).
Grub2 boots into Win7 and Ubuntu just fine. The thing is that if I choose Win7, next time Grub doesn't show up. I can't boot anything and the screen turns black. I can reinstall grub2 with Ubuntu's live CD and the cycle starts all over again, it's very annoying.
These facts may or may not be important: I think that this started happening when I uninstalled wubi after being able to install ubuntu through another method When reinstalling grub there's an error that repeats through many lines of the terminal (I can't remember what it says, if you think it's important I can check). Anyway, it ends up saying the installation finished successfully.
View 3 Replies
View Related
Nov 25, 2010
Have win98se on secondary master as it fully supports some devices Ubuntu doesn't (Aries scan it pro, pci smart modem, Lexmark printer/scanner x2250), Lucid is on primary master. Grub seamlessly booted windows using menu.lst entry:
Code:
titleWindows 95/98/Me
rootnoverify(hd1,0)
savedefault
[Code]....
Would be grateful if anyone knows a configuration that works, as using CMOS/BIOS setup to boot windows is a pain.
View 9 Replies
View Related
Dec 5, 2010
How do I configure boot so that the computer boots straight into windows xp, unless I press a key during boot?
View 5 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Jul 5, 2011
First, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies
View Related
Jul 17, 2011
I recently bought a Samsung 900x3a which is a very neat machine. However, I have some trouble trying to get ubuntu to run on it at all.Here are my symptoms / information :
- Live USB runs well
- Installation runs well
- Trying to install dual operating systems (Windows + Ubuntu)
- Installation terminates well
- If I reboot in LiveUSB, I can see my new "Ubuntu" partition with all the operating system files on it.
Does any of you have an idea of how I could possibly solve this issue without messing up my Windows environment ?
View 1 Replies
View Related
May 28, 2010
i hava a serious problem here, i have created a bottable pen drive with back track3 but when it boots to back track3 windows it does not see wireless networks, and i guess that i need a wireless card driver for my hp pavilion to work with the back track3..i need a solution to make my back track3 to detect wireless networks..
View 1 Replies
View Related
Jan 30, 2011
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies
View Related
May 28, 2010
i hava a serious problem here, i have created a bottable pen drive with back track3 but when it boots to back track3 windows it does not see wireless networks, and i guess that i need a wireless card driver for my hp pavilion to work with the back track3.. please i need a solution to make my back track3 to detect wireless networks.
View 1 Replies
View Related
May 1, 2010
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies
View Related
Aug 22, 2010
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies
View Related
