Ubuntu :: Pulling Out Of Hibernate Boots Into Windows
Aug 4, 2010
I've recently swapped from Windows 7 to Ubuntu Lucid Lynx and I haven't looked back - except for the fact that moving from Photoshop to GIMP is difficult. I digress.
Suspend works nicely (what a blessing ) but Hibernate doesn't.
Ubuntu 10.04 is installed on a 500GB Seagate External hard drive plugged into a USB port on my motherboard. My BIOS is set to boot off of it automatically (boot order). Windows 7 is installed on my 160GB () internal drive.
The problem is not when I put it into Hibernate, it's when I pull it out of hibernate. When I do my computer tries to unhibernate into Windows!
My hardware ($300 laptop from Walmart haha) - click here for more info on HP's site if you want
Model: Compaq Presario CQ60-419-wm
Video Card: Nvidia GeForce 8200M G
Processor: AMD Sempron () 2.1 GhZ
RAM: 3GB
OS it was shipped with: Vista Basic ()
View 9 Replies
ADVERTISEMENT
Feb 26, 2011
I recently installed Ubuntu 10.10 in my pc and for the last week I've been trying to enable hibernation in Windows 7. I have read more than 100 threads (and followed their instructions) with no result.
My configuration is:
hda: Windows 7
hdc: Ubuntu 10.10 (GRUB)
The BIOS is set to boot from hdc. When I select windows from GRUB, windows start up, but when I choose "hibernate" they just pop up the log in screen. However, when I set BIOS to boot from hda windows start (without GRUB) and DO hibernate when I choose to. BUT, when I switch on the pc (immediately after a successful windows hibernation) I get "Resuming Windows" regardless what disk I choose to boot from (using BIOS)!
I do not get the GRUB screen but I don't get the chance to launch the BBS popup either (I see the message but there is no response when I press F8 ). It seems like the system always boots from hda after a successful windows hibernation and there is nothing I can do to change this! On the other hand, Ubuntu always hibernates normally... I'm willing to post any information needed answers are not like "Repair Windows" or "Reinstall Ubuntu" because I want to solve the problem but find out its cause as well.
View 9 Replies
View Related
Nov 22, 2010
First of all, I searched the forums but I couldn't find anything- I don't want to be the poster who posts something that's been solved 14 times already Anyway, primary question first and then "why" below- I was wondering if there was a quick way to hibernate Ubuntu to Swap -> boot to Windows 7 and work -> Hibernate Windows 7 -> boot to Ubuntu and work, repeat until Windows glitches
I have, new Acer Aspire:
i3 370M
4GB RAM
640GB HDD as follows, from inside to outside:
X GB 3 Primary Windows partitions, 125 GB unnallocated, 50GB /home, 6 GB .boot, 4 GB SWAP
Ok, why would I want to do that? I ask because while Ubuntu boots fast at just under 1 minute at the end of my hard drive (90Mbps, I had it install from "end" when I partitioned the boot file), Windows boots slowly at about 2.5 minutes on the inside of my drive (23sh Mbps). To be able to switch between them would be useful for iTunes, ProEngineer, Matlab, and other stuff that is Windows based. Windows boots much faster from hibernation. I love Ubuntu, the speed and simplicity and the actual FRIENDLY atmosphere (what a concept WINDOWS) But I find myself needing to do some quick editing in Windows, then I can go back to my business on Ubuntu. Is there some kind of selective boot managing like GRUB that I can bring up after telling one to hibernate? Because once on SWAP, it should hold relatively indefinitely until I return, right??
Any ideas??? It sounds like some clever Terminal coding could manage the Linux side of the booting, but Windows might have to be tricked into a selective boot..
View 9 Replies
View Related
Apr 12, 2010
I had a dual boot umbutu 9.04 & xp Toshiba laptop satellite A15-S1292, (old bad battery). I use it mostly in linux but had been working in Windows, it may have hibernated and the next boot may have been to Linux. Now it boots straight into Ubuntu login screen that looks like it is may be returning from hibernate (don't use it normally). On boot don't see the normal BIOS announcement or screen allowing the selection of boot device. Doesn't boot Live CD from CD Rom or Suber Grub CD. When I examined the Windows mount receive warning that it could not be mounted as it was hibernated. I followed the suggested mount -t -ntfs -3g -o remove_hyberfile /dev/sda1 and can now access the windows partition. Boots still return to the same linux login screen. Don't seem to be able to boot from anything else.
View 1 Replies
View Related
Apr 5, 2010
I can't hibernate Windows after I install OpenSUSE 11.2
View 3 Replies
View Related
Jan 25, 2011
Before we begin just some general information, I'm running on a 64-bit HP Pavilion dv6; This laptop is something you would buy off of best buy's show floor. I installed Ubuntu through wubi in windows 7. I have a 500 GB Hard Drive. As of right now I can explore the windows 7 part of the hard drive.Now the problem began on Friday January 21st after I shrunk my Windows parition by 100GBS leaving around 370 GBS left in windows. Then I went into Ubuntu to try and format the 100GBS to create a space so I can share media in between windows and Ubuntu. ( At the time I didn't realise I could already go into the Windows Partition).
View 9 Replies
View Related
Sep 1, 2011
I own an Acer Aspire 5552g. I have installed 2 systems on it: Windows 7 and ubuntu 10.10. Everything works fine except wifi. There is a lot of threads connected to this topic, but none has solved my problem yet. The problem occurs when I hibernate Windows and then load ubuntu - I get unable to turn wifi on. As rfkill says - it is hard blocked. It wouldn't be a problem if i had a hard switch for wifi. but I only have fn+F3 for that, which somehow fails to work in my situation.
Code:
igor@igor-Aspire-5552G:~$ rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: yes
If I reboot Windows and then start ubuntu - everything's fine and working. fn+F3 turns wifi on and off as expected. I will provide some more info: when wifi's working:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
1 when it doesn't:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
2 some additional info:
Code:
igor@igor-Aspire-5552G:/$ lspci -nn
//left only network-connected info
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
08:00.0 Network controller [0280]: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) [168c:002e] (rev 01)
View 5 Replies
View Related
Jul 24, 2011
I dual boot Ubuntu and Windows and sometimes I just want to switch between the partitions without loosing the state of the OS I was currently working with. Currently to do that I just hibernate that OS and, when the computer turns off, I restart it and select the correct partition.
I do not really want to have to press the on button again every time I want to switch between partitions. I figure that there must be a way to make the hibernate action restart instead of shutting down.
How do I make the hibernate action restart instead of shutting down on:
Windows, or Ubuntu
P.S. It is more important to me that I can do this in Ubuntu than Windows (because of the way I use the partitions) therefore if one answer says the Ubuntu way and the other says the Windows way then I will mark the Ubuntu one as the answer and give the Windows one an upvote and a big thankyou.
View 1 Replies
View Related
Aug 6, 2010
I'm having an issue getting a triple-boot machine to work. I'm trying to triple-boot Mac OS X Snow Leopard (iAtkos S3) 32-bit, Ubuntu 10.04 64-bit, and Windows 7 Ultimate 64-bit. I install Mac with no issues it boots up and works. In Mac setup I make 4 partitions: Mac, Linux, Linux Swap, and Windows. After Mac is installed, I install Windows. Then Ubuntu. I select to have GRUB installed on the Linux partition. Now when I boot the PC I get a choice of Ubuntu, Windows, memtest, and Mac. Both Ubuntu and Mac work, but when I select Windows, I just get a black screen with a flashing cursor. Files are still intact and nothing has been deleted. I tried booting from the Windows CD, and running bootrec.exe /fixmbr, but all that gives me is no boot device available. I've tried every combination of installing and configuring but can't seem to get it to work. Everything is backed up so I don't mind reformatting and starting fresh if I need to. Also the Windows disk does see Windows 7 when I run scanOS. I can't use the repair option on the Windows disk as it gives me an error saying the CD is not compatible.
View 4 Replies
View Related
Jan 25, 2011
I deinstalled Ubuntu today. Just deleted the partitions etc and thought it would be fine, but now this weird grub thing is telling me:
error: no such partition
grub rescue>
I am at the end of my wits: I downloaded a liveCD, which will not boot. My XP cd boots but gets a blue screen afterwards I downloaded a windows 7 live cd which did not help either
Problem is, I can't load my bios anymore to change the boot order... Didn't even know Grub was part of linux...
Point is, I got a presentation tomorrow and all my important files are on that laptop. . . the setroot=(hd0,0) gives no response. I tried a bunch of other commands but I keep getting unknown command...
View 7 Replies
View Related
Mar 7, 2011
I successfully installed 10.10 dual booting with Win 7.Today I booted into Win7 and Windows insisted on running checkdisk. After about 10 minutes Windows booted. I then rebooted into Ubuntu. Unfortunately Ubuntu only boots into the command line now. Being very new to Linux I don't have any idea how to fix this.
View 2 Replies
View Related
May 8, 2011
I am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
View 5 Replies
View Related
May 12, 2011
I am not a computer genius. My laptop was notifying me of Windows Genuine Advantage, and I guess I am the last person on earth to know what that is. Now I can only boot in safe mode since it requests activation. There is nothing important on the computer and I only want to use it for watching movies at this time. I want to get rid of Windows altogether, and install Ubuntu. I have downloaded a copy of it and its on my removable drive. I do not have a disc drive on the laptop, only USB. How do I do this? I don't think I have a virtual drive anymore, I think I got rid of the program that was on there.
View 9 Replies
View Related
Mar 2, 2011
I would like to get rid of windows XP from my laptop. I have CloneZilla images of my root & home partitions. I have just recently scrapped Grub and switched to LILO installed to the MBR. Here are my questions:Because I installed LILO to the MBR, should I reinstall it to my Slackware root partition (or somewhere else) prior to blowing out the XP partition where, I assume, the MBR is living? Once I repartition my disk for Slackware only and 'Clonezilla back' my root and home partitions, how do I boot into Slackware? Once I successfully boot into Slackware, what do I do with LILO so that my PC boots into Slackware for ever after?
View 20 Replies
View Related
Mar 18, 2010
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
View 1 Replies
View Related
Jun 10, 2010
I have a dual boot system with Lucid Lynx and a Windows 7 that came with the laptop (it's a Dell Studio with an i3 processor).
Grub2 boots into Win7 and Ubuntu just fine. The thing is that if I choose Win7, next time Grub doesn't show up. I can't boot anything and the screen turns black. I can reinstall grub2 with Ubuntu's live CD and the cycle starts all over again, it's very annoying.
These facts may or may not be important: I think that this started happening when I uninstalled wubi after being able to install ubuntu through another method When reinstalling grub there's an error that repeats through many lines of the terminal (I can't remember what it says, if you think it's important I can check). Anyway, it ends up saying the installation finished successfully.
View 3 Replies
View Related
Nov 25, 2010
Have win98se on secondary master as it fully supports some devices Ubuntu doesn't (Aries scan it pro, pci smart modem, Lexmark printer/scanner x2250), Lucid is on primary master. Grub seamlessly booted windows using menu.lst entry:
Code:
titleWindows 95/98/Me
rootnoverify(hd1,0)
savedefault
[Code]....
Would be grateful if anyone knows a configuration that works, as using CMOS/BIOS setup to boot windows is a pain.
View 9 Replies
View Related
Dec 5, 2010
How do I configure boot so that the computer boots straight into windows xp, unless I press a key during boot?
View 5 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Jul 5, 2011
First, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies
View Related
Jul 17, 2011
I recently bought a Samsung 900x3a which is a very neat machine. However, I have some trouble trying to get ubuntu to run on it at all.Here are my symptoms / information :
- Live USB runs well
- Installation runs well
- Trying to install dual operating systems (Windows + Ubuntu)
- Installation terminates well
- If I reboot in LiveUSB, I can see my new "Ubuntu" partition with all the operating system files on it.
Does any of you have an idea of how I could possibly solve this issue without messing up my Windows environment ?
View 1 Replies
View Related
Oct 18, 2010
I'm dual-booting Fedora Linux with windows7 and everything worked fine until now My problem now is that I did an upgrade on my windows and ever since,My system boots into windows automatically without giving me the option to choose which operating system to boot to via the GRUB prompt.I'm locked out of my Fedora by windows
View 3 Replies
View Related
Jun 30, 2010
I have a dual boot set up on my Dell Inspiron 1525 laptop I have Windows Vista originally installed and i installed RHEL 5 a while ago they used to sit happily together.However After upgrading RHEL 5 from 5.3 to 5.5 yesterday and configuring grub to boot into Vista by default it refuses to do that and boots into RHEL 5 by default.
The laptop used to boot straight into vista but i thought i,d learn how grub works by configuring it, after the rhel5 upgrade. But after changing the DEFAULT value from 0 to 1 and then back from 1 to 0 still grub only boots into RLinux RHEL 5 by default regardless. Can someone help me please i need to make my laptop boot straight into Windows Vista by default and not RHEL 5 This is what my grub.conf looks like
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
View 4 Replies
View Related
Oct 29, 2010
I'll start off by saying that I've used Ubuntu for a while now and I've installed it on quite a few machines. This problem is really perplexing. I've got a machine that I wiped (hand built) that's had every version of Ubuntu on it since 8.10 - installed with no problem. The previous incarnation had Ubuntu Studio 10.04.
So I've got a fresh clean HDD. I download (via torrent) the standard 10.10 x64 disk. I boot from the CD and it just hangs at the ISOLINUX bootloader message. That pops up and the CD drive just spins down and nothing happens after that. So I do an MD5 sum on the iso checks out fine. I try the Alternate install CD, same problem. MD5 sum checks out fine on that too. I put the same failing CD in my laptop and it boots straight to the Install Menu.
So I grab a Fedora 13 and a CentOS ISO and burn both of those to CD. In this machine, both of those CDs boot absolutely fine and go straight to the live CD desktop. This PC has 2 optical drives, a SATA bluray drive and a PATA dvdrw drive. I get the same behavior on both drives. I've updated the BIOS on the motherboard (ASUS). I've tried to hit escape and hold down both shift keys while the thing is booting and neither have any effect.
The only thing I haven't tried yet is to burn another 10.04 CD to see if that works. Is this karma for last week when I heard that Katy Perry song on the radio and I didn't change the station right away? Has anyone experienced anything like this?
View 9 Replies
View Related
Jan 1, 2011
I'm getting a lot of stuff like this in ~/.cache/desktop-couch/log/desktop-couch-replication.log (below). Can someone tell me what's up with this??
(Also, an unrelated question, I have some bookmarks that are "read only". They are produced by a firefox extension that saves some information in the unsorted bookmarks. I have set the folder to r/w, but am wondering what u1 would do if I had not - both when pulling the bookmarks up to the server and when pushing them back down.) code...
View 1 Replies
View Related
Jul 30, 2009
It mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies
View Related
Jul 16, 2010
I have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
View 6 Replies
View Related
Aug 9, 2011
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is:
# fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
View 8 Replies
View Related
Apr 10, 2010
I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies
View Related
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
