Ubuntu Installation :: Setup Default Boots To Main HDD With Windows 7
Mar 18, 2010
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
View 1 Replies
ADVERTISEMENT
Mar 4, 2010
I recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
View 6 Replies
View Related
May 2, 2015
I wanted to install Debian 8.0 on my second hdd in my UEFI machine, but when I choose UEFI boot from USB, GRUB command line appears, and I cannot boot up the setup. I used Rufus to create the bootable USB stick, using the amd64 kde CD image. I tried several images and I deleted the Linux and Efi partitions from previous installation of Ubuntu . Also I deleted GRUB from the Windows 7 Efi partition.
In the UEFI setup fast boot and secure boot are disabled, and I don't seem to have the option to boot in legacy mode, if I choose the simple USB boot option (without "UEFI" in front) I get "please insert correct boot media, and press any key or reboot". I couldn't manually boot from GRUB command line, because it is showing that all the drives are empty, and if I type "boot" I get "please load the kernel first".
View 2 Replies
View Related
Mar 9, 2010
I've tried to install 9.10 on my PowerBook G3, with both a CD and DVD. However, the system shows a folder with a question mark and boots into the default OS 8.6. I even tried with an older ubuntu disc (8 point something) that had worked on another computer, but this didn't work either. I know the computer can boot from the CD drive, as it works with my OS X 10.4 DVD.
View 4 Replies
View Related
Mar 6, 2011
I have an 8 gig ssd Dell vostro that has been running ubuntu linux successfully for several months. Linux is the only O.S. on the machine. Wishing to have more room I inserted a new 32 Gig SDHC card in the card slot and did an ext4 format and then did an install using the 10.10 disk that did the original install. Everything seemed to proceed as expected, but it rebooted using the 8 Gig drive. The 32 Gig card appears to have all the proper files. How do I get it to boot from that card?
View 3 Replies
View Related
May 23, 2010
I just completed the ubuntu 10.04 installation using the windows' installer.After the installation, the system reboot. I chose "ubuntu" from the OS selection screen.A message appeared that the system would verify the installation parameters.
Suddently, a message was shown:
"no main file system chosen. Please solve this error from the partition menu."
And it wouldn't continue!
how can I find the partition menu and set the file system for the ubuntu?? An idea would be to enter the installation cd for windows (as if I would wanted to format the pc)...wouldn't then the partition menu appear?
View 4 Replies
View Related
Aug 6, 2010
I'm having an issue getting a triple-boot machine to work. I'm trying to triple-boot Mac OS X Snow Leopard (iAtkos S3) 32-bit, Ubuntu 10.04 64-bit, and Windows 7 Ultimate 64-bit. I install Mac with no issues it boots up and works. In Mac setup I make 4 partitions: Mac, Linux, Linux Swap, and Windows. After Mac is installed, I install Windows. Then Ubuntu. I select to have GRUB installed on the Linux partition. Now when I boot the PC I get a choice of Ubuntu, Windows, memtest, and Mac. Both Ubuntu and Mac work, but when I select Windows, I just get a black screen with a flashing cursor. Files are still intact and nothing has been deleted. I tried booting from the Windows CD, and running bootrec.exe /fixmbr, but all that gives me is no boot device available. I've tried every combination of installing and configuring but can't seem to get it to work. Everything is backed up so I don't mind reformatting and starting fresh if I need to. Also the Windows disk does see Windows 7 when I run scanOS. I can't use the repair option on the Windows disk as it gives me an error saying the CD is not compatible.
View 4 Replies
View Related
May 8, 2011
I am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
View 5 Replies
View Related
May 12, 2011
I am not a computer genius. My laptop was notifying me of Windows Genuine Advantage, and I guess I am the last person on earth to know what that is. Now I can only boot in safe mode since it requests activation. There is nothing important on the computer and I only want to use it for watching movies at this time. I want to get rid of Windows altogether, and install Ubuntu. I have downloaded a copy of it and its on my removable drive. I do not have a disc drive on the laptop, only USB. How do I do this? I don't think I have a virtual drive anymore, I think I got rid of the program that was on there.
View 9 Replies
View Related
Oct 18, 2010
I'm dual-booting Fedora Linux with windows7 and everything worked fine until now My problem now is that I did an upgrade on my windows and ever since,My system boots into windows automatically without giving me the option to choose which operating system to boot to via the GRUB prompt.I'm locked out of my Fedora by windows
View 3 Replies
View Related
Jun 10, 2010
I have a dual boot system with Lucid Lynx and a Windows 7 that came with the laptop (it's a Dell Studio with an i3 processor).
Grub2 boots into Win7 and Ubuntu just fine. The thing is that if I choose Win7, next time Grub doesn't show up. I can't boot anything and the screen turns black. I can reinstall grub2 with Ubuntu's live CD and the cycle starts all over again, it's very annoying.
These facts may or may not be important: I think that this started happening when I uninstalled wubi after being able to install ubuntu through another method When reinstalling grub there's an error that repeats through many lines of the terminal (I can't remember what it says, if you think it's important I can check). Anyway, it ends up saying the installation finished successfully.
View 3 Replies
View Related
Nov 25, 2010
Have win98se on secondary master as it fully supports some devices Ubuntu doesn't (Aries scan it pro, pci smart modem, Lexmark printer/scanner x2250), Lucid is on primary master. Grub seamlessly booted windows using menu.lst entry:
Code:
titleWindows 95/98/Me
rootnoverify(hd1,0)
savedefault
[Code]....
Would be grateful if anyone knows a configuration that works, as using CMOS/BIOS setup to boot windows is a pain.
View 9 Replies
View Related
Apr 10, 2011
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies
View Related
Jul 17, 2011
I recently bought a Samsung 900x3a which is a very neat machine. However, I have some trouble trying to get ubuntu to run on it at all.Here are my symptoms / information :
- Live USB runs well
- Installation runs well
- Trying to install dual operating systems (Windows + Ubuntu)
- Installation terminates well
- If I reboot in LiveUSB, I can see my new "Ubuntu" partition with all the operating system files on it.
Does any of you have an idea of how I could possibly solve this issue without messing up my Windows environment ?
View 1 Replies
View Related
Jul 16, 2010
I have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
View 6 Replies
View Related
Aug 9, 2011
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is:
# fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
View 8 Replies
View Related
Nov 14, 2010
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
View 8 Replies
View Related
Oct 26, 2010
Alright so I recently started using Cardapio with the intent of replacing the panels with a single dock. The only thing left to do is to replace the docky icon with the cardapio menu. Apparently there is a key in the gconf-editor apps/docky-2/Docky/Items/DockyItem that can be used to change what the docky icon does. I am unable to find the folder DockyItems in the hierarchy. I added both the folder and the key but it makes no change. I'm using the latest Docky build and Ubuntu 10.10 so things may have changed since the write-ups on how to do this. Has anyone successfully added the menu functionality with the latest versions or at least figured out where the DockyItems went to? its the last thing I'm changing on my desktop... PS. Is there any way to add the notification area/user logout to the dock as well?
View 2 Replies
View Related
Feb 4, 2010
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
View 1 Replies
View Related
Jan 27, 2011
i just listening a song on vlc and read this thread. [URL]... After reading complete thread i just off vlc and then start installing software with instructions given in the thread. When google earth installed. i just use google earth only 10 minutes and then again play a song. then vlc looks like this. Screenshot.png and no video playing. no main menu show. What it happen? i try to remove it. sudo apt-get remove vlc and again install it sudo apt-get install vlc
same result.
then i apply
sudo apt-get remove --purge vlc
and install again same result.
i just want to vlc its default condition.
View 9 Replies
View Related
Jun 4, 2011
I actually have it installed on two of my computers. One is an older Acer Aspire 3100 that dual-boots windows 7 and Ubuntu 11.04, and an Acer Aspire ONE that has Ubuntu 11.04 as main OS. Before Ubuntu, (even currently) I'm a MAC user, and i'm really liking Ubuntu. On my 3100 it works just fine except the screen flicker on wake, but a quick reboot will solve that.
On my Aspire ONE i've had to re-install ubuntu multiple times. (we're talking 5 or 6 in the last month) Sometimes, it'll boot up to absolutely nothing. One time I got a weird error message everytime it booted. The last install froze up a lot, and eventually would only start to boot into setup. I reinstalled Ubuntu, again and it worked until I shut it off. Boot back up, same thing. Threw me right into setup. I was able to get around it after 5 or so tries of rebooting, hitting ALT F11 and somehow got into ubuntu recovery, but loaded normally. I'm using it now and it's working great currently.
Specs on the ONE
1.5GB Ram
8GB SSD (could this be the culprit?)
ATOM (1.8 or 1.6) GHz Processor.
Halfway through this fiasco, I put windows XP on it and used it solid for 3 days without any of the mentioned above issues.
View 2 Replies
View Related
Nov 14, 2010
I installed Lenny on a computer and set up grub to boot windows by default with a timeout of 0 Is there a way to interrupt the boot process so I can boot linux? Or can I boot from a flash drive somehow? PS: nothing to do with topic, but I just found out that the top 24 supercomputers run linux , and more besides. That is way cool. check out [URL]..
View 4 Replies
View Related
Feb 12, 2010
I want to change my default boot OS from Ubuntu 9.10 which is now o Windows XP Pro SP3.How can I do that?Grub 2 is installed
View 1 Replies
View Related
Jul 2, 2011
i always had windows as default in my grub (this is my desktop pc, mostly for gaming, i use windows here for about 98% of the time linux is just for working)i lastly upgrades to 11.04 (bad idea never change a running system)and now my grub starts linux as default and i dont know why.i started startupmanager and set windows as default no change i clicked myself into the /boot/grub/grub.cfg and opened it as su - it looks like everything is right here too but i could think of something, i need to change there.
View 3 Replies
View Related
Jun 17, 2011
I just installed Ubuntu 11.04 via USB drive. I have 3 disks on my system. Two are 1TB drives and are actual real drives, labeled sda and sdb. sda is where I installed Ubuntu (on its own drive). I also made sure that GRUB was assigned to sda during setup.The 3rd drive isn't really a physical drive, it's a stripped RAID. My BIOS has Intel raid support, and I have 2 500GB drives that form one 1TB drive, and that's the one that Windows 7 is installed on. How do I setup GRUB to allow me to boot back into Windows 7?
View 9 Replies
View Related
Mar 23, 2011
I was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
View 7 Replies
View Related
Aug 9, 2011
I setup windows on my ubuntu server. I loss grub now. What I should do?
View 1 Replies
View Related
Oct 20, 2010
Before I always had Windows partition and I was installing Linux on a second partition. Now I would like to reformat the HD and only have two Linux distributions installed. The idea is that one will be for everyday use and the other will only be used occasionally for things such as banking etc. So for me it's very important that one Linux distro does NOT see the other one, and certainly not to share things such as /home. So my question is, once i reformat the disk and start installing first distro, which partitions should I make? Can I make partitions for both distros while installing the first one, or should I go one by one? Can there be two / partitions or two /home partitions? I guess swap can and should be shared. If there can be only one / and one /home partitions, do I create another partition where the second distro will go? How do I then define the / and /home for that second one?
I hope someone who has done something like that can share his/her knowledge. If distros are important, I am thinking about Ubuntu or Kubuntu for everyday use, and CentOS for banking. If someone can suggest another distro based on their security track record, I'd love to hear that too. I don't need nor want servers, both will be desktop versions with all ports closed.
View 7 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
Jan 18, 2011
I am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
View 4 Replies
View Related
