Fedora X86/64bit :: My Windows Partion Won't Mount On Some Boots
Jul 30, 2009It mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies
ADVERTISEMENT
General :: Mount Windows Partion In System?
Sep 29, 2010I am using dual booting windows and redhat linux and i want to some datas from windows to linux
how to mount windows partion in linux
Fedora :: Way To Open Windows Partion Via Virtualbox
Jan 18, 2010Currently i have a dual boot on my laptop of fedora and vista. Is there a way that i can use virtualbox to open my windows partion while using fedora? I understand that virtual box makes a "partition" on my fedora partion and runs of that. It would be pretty awesome if i could open my windows partion while using fedora.
View 14 Replies View RelatedFedora :: Windows (dynamic) Ntfs Partion Has Lost On Installation Of F14
Nov 27, 2010I have a two Hard disk one of which is 160GB & other is 500GB. In 160GB HD I had installed fedora 13 & in 500GB Windows 7. There was my unluck that the whole of partion of 500GB were convered into dynamic disk so that i was unable to access other partion of 500GB HD. i searched for that but ultimately i was unsuccessful. Now I decide to format the C: drive (of 500GB HD).C: drive was 80GB size and there was a system information partition of 100MB created on windows seven installation.Now on installation of fedora 14 in 500GB (at partition 80GB + 100MB) i am unble to access other D: & e: drive. In Disk utility of fedora it is showing 414GB free.
View 2 Replies View RelatedFedora X86/64bit :: USB Flash Drive Mount - Un-mount ?
Sep 17, 2010Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies View RelatedSoftware :: How To Mount NTFS Partion In RHEL 5
Apr 2, 2010Mine is dual bootable system i686 (Visa and RHEL 5). I have important data on VISA which is NTFS. I would like to access the NTFS drives from Linux RHEL 5.
I have downloaded and installed the fuse-2.7.3-1.el5.rf.i386 and fuse-ntfs-3g-1.2301-1.el5.rf.i386 rpms from dag.wieers.com but when i run the mount command which is mount -t ntfs-3g /dev/hda5 /mnt/wing it is showing the error message ----------------------------------------- FATAL: module fuse not found...
I have to use RHEL 5 only.
Software :: Can't Mount Root Filesystem After Partion Change
May 25, 2010I am a linux semi-noob who just got the idea that it would be fun to play with Arch Linux.I was dual-booting Windows and OpenSuSE, and I installed Arch by shrinking the Windows partition and putting a new logical partition in between the windows partition and the swap partition I already have.Unfortunately, opensuse still thinks that its root filesystem is on /dev/sda7 so it fails to boot b/c it is looking at an ntfs filesystem that I used for document sharing.If someone has a solution, that will save me from having to reinstall opensuse.
View 5 Replies View RelatedUbuntu :: Destroyed Windows Partion With Gpart
Jan 19, 2010OK so i burn a copy of 9.10 to a CD and started up the live desktop, when i got in i started up gpart. i desisted to give 40 GB to ubuntu i put in the numbers and came out with a 39.04 GB empty partion, so i toyed with it to try to get to 40 on the nose. this is the point where i should have walked away while i was ahead but i did't, i kept toying with it till i was almost there, but when i finally got it i realized i still had to finalized the changes so i hit the green check mark and let it run after 10 min's of gpart was reading my entire 180 gb partion which i had windows on. i grew in partion, and i remembered it was much quicker in the past when i partioned from inside the install so foolishly not knowing what i was doing i hit cancel. then my heart stopped when i saw the word unknown where it used to say ntfs. i relised i just destroy my windows install. i started to panic, because my backup of all my files where on another computer and guess what 3 days ago the hard drive died on it and i never got a chance to back up the stuff from this one to somewhere else. then i relised i had a 10 gb factory installed backup partion. so i restarted the machine and got nothing operating system not detected, and when i trying to got to the started up menu i didn't have the option to boot in recovery mode which i was expecting. but i had one last saving grace i upgraded from vista to 7 for free and still have the install disk, so i started up the install disc and selected recovery mode after trying automatic recovery and falling i tried restore from system image, it couldn't find the partion, as a last ditch effort i tryed system restore and as expected failed
i am at my wits end and have no idea what to do next short of wipe the drive and do a clean install, which i relay don't want to do because I'll lose all my data.
Ubuntu :: Delete Windows Partion Completely
Sep 3, 2010How do I completely delete the Windows partion using GParted in Ubuntu? I heard that the boot option for Windows still shows even after deleting the partition using GParted
View 2 Replies View RelatedFedora X86/64bit :: Ipod Touch 3rd Gen Won't Mount / Can't Be Seen
May 26, 2010Running Fedora 13 x64 and I have an ipod touch 3rd gen plugged in via usb. Fedora does not mount or see it at all. I have gtkpod, ifuse, ipod-sharp, libgpod.. nothing seems to find it. Is there something I should be doing?
View 2 Replies View RelatedGeneral :: Overwrite Windows On Current Drive - But Not The Recovery Partion
Aug 6, 2011Since Ubuntu is smaller than Windows, will it entirely delete Windows to install Ubuntu? The Ubuntu installation won't affect the recovery drive, right?
View 10 Replies View RelatedFedora Installation :: Windows 7 PC Boots, Ignoring Live Cd
Jul 16, 2010I have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
Fedora Installation :: OT: Dell BIOS Always Boots Windows Harddisk?
Nov 14, 2010I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
Fedora X86/64bit :: Dolphin On KDE 4.2 - Mount Each Partition With Root Pass
Apr 20, 2009Ever since I started using KDE as in 4.2, I have been doing this regularly. When I startup KDE, I open Dolphin and click and mount each partition with root pass. I thought it might be some KDE issue as is the ever developing code and will be fine in future updates. But now I'm in 4.2.1 and it still exists. Upon inquiring fellow users on other distros, I have come to believe this is a *Fedora only* issue now. [URL].
View 8 Replies View RelatedFedora :: Cold Boots Often Take Up To 10 Attempts Before The Computer Successfully Boots?
Oct 29, 2010my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
Fedora X86/64bit :: Can't See Files In Mount Ext2 Hard Drive Slave
Aug 28, 2009so i used to have my harddrive mounted in fstab, to /mnt/diskS. than i decided to change the permissions to 766 global i believe i read somewhere with chmod. anyways so after that i checked to see if it worked and to my dis believe all my files are gone. or just arnt showing, the space taken up hasnt decreased but i just cant see any of my files. so i decided to take the harddrive out of fstab and restart my computer. and after restart when i click on the folder the harddrive is mounted in it says permissions belong to 1000?
View 1 Replies View RelatedUbuntu Networking :: Sharing Windows 7 Drives - Unable To Mount Location - Failed To Mount Windows Share Error Message
Sep 5, 2010I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedFedora X86/64bit :: Transparency For Windows - Ksonole ?
Jun 10, 2009Trying to enable transparency in konsole theme , and its warning me I have no such support for such things atm, and wondering how I enable this ?
View 2 Replies View RelatedFedora X86/64bit :: X Windows Fail On Installation
Jul 11, 2009I am trying to install 64bit fedora 11 on my computer but it always tells me that the x window failed so it falls back on text mode. i have an nvidia in my laptop.
View 3 Replies View RelatedFedora X86/64bit :: Run Windows In A Virtual Machine On 14?
Jan 20, 2011I want to run 64bit windows in a virtual machine on my fedora 14 64bit. using virtual machines and want to know what is recommended for fedora 14 and if 64bit vm's are supported yet.
View 5 Replies View RelatedGeneral :: Mount A Filesystem When The System Boots?
Dec 21, 2009I'm trying to mount a filesystem when the system boots, so i won't need to mount it everytime..
So what I did was copying the line of the filesystem I wanted to mount on startup from /etc/mtab:
Code:
And pasted it as it is, in the /etc/fstab file. when the system booted, it didn't work. not only that, I wasn't able to mount the filesystem at all, (it gave me some kind of an error) so I removed the line from fstab file and it all back to normal. how can I mount this filesystem on boot? (i'm using Fedora 12)
Ubuntu :: Fail To Mount Disk Right After System Boots?
Apr 10, 2010I got a little problem with Xubuntu here. Every time after I boot the system, I find one of my partitions from fstab not mounted where it's supposed to be. I do mount -a, and it replies: "mount: /dev/sdb6 already mounted or /mnt/data busy". Checking lsof of neither device nor mount point gives me nothing, and checking the output of mount I see device isn't mounted anywhere.
It gets better than this: after some time, device can be mounted just fine, this time is from 11 to 12 minutes. If something is doing anything with my device that takes whole 11 minutes, how come I don't know what it is? How can I mount device on boot? Some more (ir)relevant facts:
1. This partition is the biggest - 376 Gb
2. Here's my fstab line for this device:
Code:
/dev/sdb6/mnt/dataext3defaults02
3. After the installation, I changed the mount point in fstab, and using /dev/sdb6 instead of UUID is a result of blind experimentation
Fedora X86/64bit :: 14 - Graphics Is Getting Distorted Whenever Move Windows Along The Screen
Mar 27, 2011Graphics is getting distorted whenever I move windows along the screen. This happened soon after I installed KDE desktop and compiz fusion on my pc. I am having 1GB ATI MOBILITY RADEON HD 54 graphics card (Seems like that was the problem). The first fix that I tried: Installed qt-devel compat-libstdc++-33 and then created an xorg.conf file by installing system-config-display and edited the file to include radeon under drivers then restarted --> this didnt work Compiled ATI drivers for linux ---> this also dint work However, I can view the o/p clearly when I type glxgears Seems like the issue is with this. But I donno how to change this
glxinfo | grep direct -i
glxinfo | grep OpenGL -i
When I run the above command, the o/p includes direct rendering: yes" and also various OpenGL information concerning for "Mesa" but not for "ATI Technologies" I am facing this issue on KDE as well as Gnome.. In KDE, if I check activate Desktop graphics then I would get automatically logged out. In gnome if I select "Desktop Effects" then I get a message "3D acceleration not supported".
Fedora Security :: LUKS Encrypted Partion And Start Up
Aug 18, 2010I run fedora 13 on my laptop (dual boot with Windows 7) and I just created a new partion to hold sensible data, encrypted with LUKS. I followed this tutorial for creating it.Now, everything went well and the new partition works well. But I needed something a little different from what the tutorial suggested, because I don't want the partition to be mounted on the system each time it boots, but I would (unlock and) mount it manually when I need it.
To do so I just didn't follow the Tutorial steps from 7 to 13, thinking that without the changes to crypttab and fstab the partition wouldn't be even touched by the start up process. And that's partially true: the partition isn't mapped nor mounted in the system when I boot, but the problem is that it however keeps asking for the passphrase to unlock it even if it doesn't get mounted or mapped.It just asks for it before the system loads all it's parts (udev, filesystems, etc) and I can't understand why, what it uses it for if it doesn't unlock it.So my question is: why does it ask for the passphrase to unlock luks if I haven't set crypttab and fstab to mount the partition on start up?
Fedora X86/64bit :: Rhythmbox Keeps Asking For Windows Media Audio Decoder Plugin / Fix It?
Jul 4, 2009My music library contains some old .wma files and each time I try to run Rhythmbox, a window pops up saying that:
<Name of current song> requires an Additional plugin. The following plugin is required: Windows Media Audio Decoder. Do you want to search for this now ?
If I press the search button I get a response saying that the package was not found. Then I press the close button, only to see the same dialog popping up again. The funny thing is that all this is happening while the current songs is not in WMA format and it is actually playing
I am running fedora 11 and have configured both rpm-fusion and livna repositories.
Fedora X86/64bit :: Install Skype On A 64bit Fc14 And The 32bit Doesn't Work
Feb 16, 2011I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedSlackware :: Blowing Out Windows - PC Boots For Ever After?
Mar 2, 2011I would like to get rid of windows XP from my laptop. I have CloneZilla images of my root & home partitions. I have just recently scrapped Grub and switched to LILO installed to the MBR. Here are my questions:Because I installed LILO to the MBR, should I reinstall it to my Slackware root partition (or somewhere else) prior to blowing out the XP partition where, I assume, the MBR is living? Once I repartition my disk for Slackware only and 'Clonezilla back' my root and home partitions, how do I boot into Slackware? Once I successfully boot into Slackware, what do I do with LILO so that my PC boots into Slackware for ever after?
View 20 Replies View RelatedUbuntu Networking :: Sharing Folders From It To Windows - Error: "Unable To Mount Location" "Failed To Mount Windows Share"
Jun 28, 2011I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies View RelatedFedora X86/64bit :: Skype Static Version On 64bit FC10
Mar 16, 2009Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedFedora X86/64bit :: Same Fortran Code, Different Results For 32 And 64bit System?
Jan 15, 2010I have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.