I'm dual-booting Fedora Linux with windows7 and everything worked fine until now My problem now is that I did an upgrade on my windows and ever since,My system boots into windows automatically without giving me the option to choose which operating system to boot to via the GRUB prompt.I'm locked out of my Fedora by windows
View 3 RepliesFirst, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies View RelatedProblem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies View RelatedAfter upgrading from 9.10 to 10.04 my System no longer boots. I had a Dual-Boot System. On Boot I get - "error : the symbol 'grub_puts_' not found grub rescue> (prompt):
If I run 'insmode /boot/grub/normal.mod' (I get the same error)
If I run 'insmode /boot/grub/ext2.mod' (I get 'The symbol 'grub_xasprinf' not found)
If I run ls /boot (The Kernel File Names look Ok)
If I run in Rescue Mode it Reports (The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the Kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.) I ran the recommended reporting script and got the following output:-
Code:
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdd <<< This is my USB Flashdrive .....
After my upgrade the bootup seems to take a long time.I am dual booting with XP.From the boot menu when I select Ubuntu it takes 35 seconds before I get the login screen.Is this normal?Also, other apps seem to be running slow. Running Win 7 under VMWare Workstation 7.1.
View 7 Replies View RelatedI have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
I have Windows 7 installed, I then installed opensuse 11.4. Everything went fine with the installation, no issues. After I removed the DVD and reboot, it does not load GRUB at all and just loads into Windows 7. However if I put in the installation DVD then select to boot from local disk it loads GRUB. So now I have to load the DVD if I want to get into suse.
Not sure how to fix this. I see some of you request for such information so here it is:
# fdisk -l
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
I'm having an issue getting a triple-boot machine to work. I'm trying to triple-boot Mac OS X Snow Leopard (iAtkos S3) 32-bit, Ubuntu 10.04 64-bit, and Windows 7 Ultimate 64-bit. I install Mac with no issues it boots up and works. In Mac setup I make 4 partitions: Mac, Linux, Linux Swap, and Windows. After Mac is installed, I install Windows. Then Ubuntu. I select to have GRUB installed on the Linux partition. Now when I boot the PC I get a choice of Ubuntu, Windows, memtest, and Mac. Both Ubuntu and Mac work, but when I select Windows, I just get a black screen with a flashing cursor. Files are still intact and nothing has been deleted. I tried booting from the Windows CD, and running bootrec.exe /fixmbr, but all that gives me is no boot device available. I've tried every combination of installing and configuring but can't seem to get it to work. Everything is backed up so I don't mind reformatting and starting fresh if I need to. Also the Windows disk does see Windows 7 when I run scanOS. I can't use the repair option on the Windows disk as it gives me an error saying the CD is not compatible.
View 4 Replies View RelatedI am fairly inexperienced with Linux. I'm good with windows and PCs in general. I've been wanting to setup a Linux environment for teaching myself some programming so I downloaded Ubuntu 11.04 to install on my main Windows desktop.
I have two internal HDDs and an external HDD. Each of the internals is 160GB and the external is 1TB. I have Windows on the drive in SATA0. I split the drive in SATA1 into 3 partitions. I Windows Disk Management to shrink the NTFS partition to 100GB for storage. I used gParted to create a 2GB swap partition the rest is a ext4 partition So sda1 is NTFS, sdb1 is swap, sdb2 is ext4, and sdb3 is NTFS, and sdc1 is NTFS
I mounted sdb2 as root and installed Ubuntu there. I chose the manual option for the installation as the install alongside Windows option only showed my external HDD (sdc). I wasn't sure where to place the boot loader so I tried to overwrite the Windows boot loader on sda but that failed with an error about no file system available or compatible. I figured Grub2 doesn't work on NTFS......
I am not a computer genius. My laptop was notifying me of Windows Genuine Advantage, and I guess I am the last person on earth to know what that is. Now I can only boot in safe mode since it requests activation. There is nothing important on the computer and I only want to use it for watching movies at this time. I want to get rid of Windows altogether, and install Ubuntu. I have downloaded a copy of it and its on my removable drive. I do not have a disc drive on the laptop, only USB. How do I do this? I don't think I have a virtual drive anymore, I think I got rid of the program that was on there.
View 9 Replies View RelatedI upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
I have a dual boot system with Lucid Lynx and a Windows 7 that came with the laptop (it's a Dell Studio with an i3 processor).
Grub2 boots into Win7 and Ubuntu just fine. The thing is that if I choose Win7, next time Grub doesn't show up. I can't boot anything and the screen turns black. I can reinstall grub2 with Ubuntu's live CD and the cycle starts all over again, it's very annoying.
These facts may or may not be important: I think that this started happening when I uninstalled wubi after being able to install ubuntu through another method When reinstalling grub there's an error that repeats through many lines of the terminal (I can't remember what it says, if you think it's important I can check). Anyway, it ends up saying the installation finished successfully.
Have win98se on secondary master as it fully supports some devices Ubuntu doesn't (Aries scan it pro, pci smart modem, Lexmark printer/scanner x2250), Lucid is on primary master. Grub seamlessly booted windows using menu.lst entry:
Code:
titleWindows 95/98/Me
rootnoverify(hd1,0)
savedefault
[Code]....
Would be grateful if anyone knows a configuration that works, as using CMOS/BIOS setup to boot windows is a pain.
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies View RelatedI recently bought a Samsung 900x3a which is a very neat machine. However, I have some trouble trying to get ubuntu to run on it at all.Here are my symptoms / information :
- Live USB runs well
- Installation runs well
- Trying to install dual operating systems (Windows + Ubuntu)
- Installation terminates well
- If I reboot in LiveUSB, I can see my new "Ubuntu" partition with all the operating system files on it.
Does any of you have an idea of how I could possibly solve this issue without messing up my Windows environment ?
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies View RelatedI dual-booted Ubuntu three weeks ago with windows vista. Now I want to get rid of everything windows vista and its partition.As I restart my computer the esc, f1,f2,f8,del, and f12 keys don't do anything on the screen that says Dell BIOS revision 1.0.3 the next screen is blank. and my monitor, on auto detect(analog input), says cannot display this video mode 1680x1050. I've tried using the live cd (I just put it in the drive, and don't know what else to do besides that)I've tried using sudo xrandr --output VGA1 --mode 1024x768 --rate 60 in the terminal but all I get is this -> xrandr: Failed to get size of gamma for output default (I did this because I thought it might be a monitor problem)
I've tried going to disk utility...buts that all mumbo jumbo to meex: can anyone explain partitions me? I have: dell utility 49MB FAT,recovery 11 GB NTFS, OS 184 BG NTFS, Extended 56 GB, 53 GB ext4, and finally 2.1 GB Swap 2.1 GB which is the last partition known as sda6.
I've tried to install 9.10 on my PowerBook G3, with both a CD and DVD. However, the system shows a folder with a question mark and boots into the default OS 8.6. I even tried with an older ubuntu disc (8 point something) that had worked on another computer, but this didn't work either. I know the computer can boot from the CD drive, as it works with my OS X 10.4 DVD.
View 4 Replies View RelatedI had problems with my old Ubuntu version,so I decided to upgrade to Ubuntu 10.10. As I wanted to keep my old files I didn't choose the erase the hard disk and install option so the installation system created automatically another partition.
Now that I've installed it I want to delete my old Ubuntu version AND keep my old files, or at least the most important ones (videogames saved games, openoffice documents, music and video). BUT there's one big problem, I can't start the old partition, if I try to run it it runs OK except that I don't see anything in the screen (yes, I listen to the Ubuntu start sound and so, but can't see anything). It happend before, that's why I changed it.
now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
Everytime I try to run Ubuntu, it goes into a screen with Recovery Mode and the only way to get into the graphical enviornment is by selecting "failsafeX" at which point it says:
Code:
Ive installed maverick meerkat on my mid 2009 mbp and now whenever i start the computer it automatically boots into ubuntu instead of my mac os 10. how do i go about changing the boot sequence without having to install refit and pressing the option key all the time.p/s: i dont like using refit because it takes 30 seconds just for the option screen to appear on boot up.
View 2 Replies View RelatedI installed ubuntu inside windows, thing were going good, till windows got affected with virus, so had to reinstall it, now boots directly in windows 7. I have a 500 GB HDD with two equal partitions,
C: drive has windows
D: drive has ubuntu
I tried the boot-repair, didn't work, instead it corrupted windows boot, which got fixed using startup recovery but I want ubuntu back...
after update my CentOS 5.2 geting follow problem:
my System stop by Grub,
i can start my System manually by typing instructs from menu.lst.
menu.lst
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
[Code]....
I would like to get rid of windows XP from my laptop. I have CloneZilla images of my root & home partitions. I have just recently scrapped Grub and switched to LILO installed to the MBR. Here are my questions:Because I installed LILO to the MBR, should I reinstall it to my Slackware root partition (or somewhere else) prior to blowing out the XP partition where, I assume, the MBR is living? Once I repartition my disk for Slackware only and 'Clonezilla back' my root and home partitions, how do I boot into Slackware? Once I successfully boot into Slackware, what do I do with LILO so that my PC boots into Slackware for ever after?
View 20 Replies View RelatedI noticed that when my server boots up, it's network interface on eth0 is always down and I always must run the 'ifup eth0' command in order to get it to work for some reason. I checked my configuration and it looks legit to me...
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5).
[Code]...
Anyone know why my system is booting with out bringing up my eth0 interface? It's very annoying.
Don't know if this is a coincidence, but the other day we had a power cut and my laptop went off. When I tried to reboot it got to the ubuntu start up screen, but when it tries to get to the "desk top" screen it all goes blue and black flashes. I have XP and Vista on the same machine and these both start up ok
View 2 Replies View Related