Slackware :: Amaya On 13.1 64 Crashes X?
Nov 12, 2010
I had been using Amaya on Slackware 13.1 32bit with no problems. I then upgraded to 64 bit, basically because of one program. Now, I cannot run Amaya. It crashes X. In my efforts to solve this I cannot find an X log with entries related to the crash. The console after the crash only shows the last lines of the output. I cannot scroll back to view the source of the errors. Is there a way to redirect error output from an X crash to a file for later analysis?
View 6 Replies
ADVERTISEMENT
Feb 10, 2010
I recently read a post and the comments in Linux Magazine concerning other browsers outside of firefox and chrome. Midori, Dillo, Kazehakase, and Netsurf were in the synaptic package manager so I installed them. Does anyone use the Amaya, Arora, or Uzbl browsers and what are they like?
View 2 Replies
View Related
Apr 7, 2010
I have used Frontpage and Dreamweaver in Windows.Now it is time to do all this in linux - reference book I have is old (2004) listing Amaya, Websphere, Siteseed, and Wisewig for linux as comparable to Frontpage and Dreamweaver What is currently being used to add html or other code pages to a web site using linux Fedora ?
View 6 Replies
View Related
Jan 29, 2010
Code:
$ uname -a
Linux MyBox 2.6.28-17-generic #58-Ubuntu SMP Tue Dec 1 21:27:25 UTC 2009 x86_64 GNU/Linux
[code]...
View 3 Replies
View Related
Jun 28, 2011
After upgrading from 10.10 to 11.04 I get the following warning /etc/cron.daily/man-db: dpkg-query: warning: parsing file '/var/lib/dpkg/available' near line 59383 package 'amaya': error in Version string 'wx-11.3.1-1': version number does not start with digit
Following is an extract of the file
------------------------------------------------
Package: amaya
Priority: optional
Section: web
[code]...
View 1 Replies
View Related
May 13, 2009
i was trying to download Amaya a web authoring tool(open source). i tryed to download and install it but it had a error resolving dependency. could not find libexpat.so.1 i tried to find a place to get this but no success yet
View 6 Replies
View Related
Jun 8, 2011
I just installed Slackware 13.37 on an old IBM Netvista and when I try to start KDE it gets through most of the splash screen and then crashes with the following error messages: Segmentation fault at address 0x4
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting
[code]...
lspci shows I have an Nvidia chip: NV6 Vanta/Vanta LT rev 15 Other GUIs, such as Fluxbox, do not crash, so I think the problem may be with KDE, but I am at a loss. Has anyone seen or solved such a problem? I have not posted /var/log/Xorg.0.log because the KDE error message above seems more detailed.
View 9 Replies
View Related
Mar 4, 2010
I just made a current iso and installed current and when I tried to start X the screen was washed out in a rainbow kaleidoscope pattern. I exited out and ran xorgset and Xorg -configure. Both of these hardlocked my system.
BTW Im using a geforce 8800GT. i tried installed the nvidia driver but it still locks when I run xorgsetup.
I have to go to work, so I will post the logs when I get home
View 9 Replies
View Related
Oct 6, 2010
I am running 64-bit current. I have not identified which update started the Dolphin crashes, but it recently has been happening very often, usually within a few seconds of starting it, but not always.
Googling suggested that it might be a dbus issue, so I rolled my own package using dbus-1.4.0 and the slackbuild from the 64 bit current source.
Dolphin has been rock solid since. I noticed that there was an 'allow root globally' patch which I commented out. I am guessing that this may affect applications that I have not used yet or the issue has been fixed in version 1.4.
I have not seen any evidence that other current users have had this problem, but maybe Robby would consider an upgrade?
View 3 Replies
View Related
May 8, 2011
I'm having an issue with the screensaver activating. It crashes X. It doesn't matter which screensaver I use.
[code]...
I have an intel 915 chipset I believe. Might anyone know how to fix this?
View 12 Replies
View Related
Nov 1, 2010
I've installed slackware64 up to date and have a annoying problem:
Dolphin crashes many times.
Here is some debug info:
View 10 Replies
View Related
Nov 3, 2010
I use Slackware 13.1 and eclipse 3.6 (Helios). When I do some programming the eclipse is always crashing. E.g.: class c, c.gwtC(); when I write the "." and the autocomplete is activated the eclipse crashes.
View 3 Replies
View Related
Jan 13, 2011
I'm running Slackware64-current. Since the upgrade of last Monday I'm experiencing several crashes of the X-server. It begins with an issue that one Window, e.g. Konsole or Firefox don't become active when clicking them. After some seconds the screen becomes dark and I end up on the console. First error I saw was from akonadi. Deinstalling akonadi didn't change anything. But there is an errormessage about a segmentation-fault in the Xorg.0.log. I'll append the logfile to this post. My graphics-card is an ATI HD5470 and have fglrx installed, downloaded from ATI. My kernel is
Code:
Linux samsung 2.6.35.10 #3 SMP Thu Jan 6 20:03:53 CST 2011 x86_64 AMD Athlon(tm) II Dual-Core M320 AuthenticAMD GNU/Linux
View 7 Replies
View Related
May 2, 2010
Running slackware-current
The krusader slackbuild crashes on my machine with the following error, see attached.
View 3 Replies
View Related
May 16, 2011
Since I installed Slackware 13.37 I'm having problems with Okular. Whenever you open a .pdf file, it crashes immediately. Opening other file formats works fine.
View 2 Replies
View Related
Apr 28, 2011
I have installed (twice) slackware 13.37 64 bit on a virtual machine (vmware workstation 7). But when i try to startx the kde window starts to load and the harddrive on the kde startscreen shows and then it crashes. Anybody that running slackware 13.37 on a virtual machine?
View 10 Replies
View Related
May 3, 2011
I've installed Slackware64 on a Toshiba Qosmio laptop (booting with ext4, SAMSUNG HM500JI HDD, 3 GB Ram, Intel Core 2 Duo Processor, Intel chipset and graphics).The system boots the huge kernel just fine. But after booting with the generic kernel AND after having prepared a mkinitrd with the mkinitrd generator, the boot process crashes at ~4sec with a panic.
View 14 Replies
View Related
Dec 17, 2010
After the last kde updates, when i try to set up the Sonar screensaver to ping 254 hosts it crashes KDE and returns to login screen. Does any one have that response from sonar or am i alone? Edit: slackware-current, no compositing, Asus EEEPC 1215N
View 10 Replies
View Related
Jan 20, 2010
First: I upgraded my slackware 13.0 last night (Philippine time) to -current. I just download the while current tree (except for source) and copied to my home dir, then do the slackpkg commands.
#1 Added a mirror to my home directory pointing the slackware-current tree.
#2 slackpkg update
#3 slackpkg install-new
#4 slackpkg upgrade-all
#5 slackpkg clean-system
#6 lilo was configured
#7 reboot
It successfully upgraded. Although I'm aware that I have installed openchrome driver and drm kernel module when it was slackware 13.0.
After a reboot, it crashes in between the boot time, if I was not mistaken, I read ACPI something on the bottom of the console, then the screen flickers and goes blank. It locks up there.
By the way, it is a laptop with VIA chipset on it.
(Using the Slackware 13.0 DVD, I booted using hugesmp.s root=/dev/sda3 rdinit= ro for the rescue.)
Trying to fix it by myself (no internet at home) I tried to look at /var/log/messages and cannot find what is the cause (newbie mode). I also tried to disable some services such as hald, httpd, mysqld, bluetooth, wicd, wireless, the old kernel and some others at /etc/rc.d/ by removing the execute bit.
After a restart, still the problem exists.
Now, I finally backup the whole home dir, moved to home-bak and decided to install the fresh slackware-current instead.
Second: I used the 13.0 installer, then setup slackware using the pre-mounted directory containing the slackware-current tree. I only deleted the files except for home-bak and not reformat the drive.
It actually installs, but after the reboot (using the new 2.6.32.3 kernel), still the problem persists.
View 9 Replies
View Related
Dec 17, 2010
I recently upgraded to -current from 13.0 on my Dell Inspiron 1525 Laptop. It seems to have strange problems since then. The X crashes after sometime if I am running a video in firefox (flash based, say .....) in the full-screen mode. When I am not in the full-screen, it seems to run just fine. A similar thread was posted a few days back (http://www.linuxquestions.org/questi...rashes-846796/) and I thought I had overcome the problem using one of the suggestions provided, but apparently, I just had not run full-screen videos ever since (and I thought it was solved!). code...
I should mention that, the crash happened when I was running a video chat on gmail in full-screen mode too. I have the Xorg.0.log for that too, if it is going to be helpful. Also, one thing I noticed was that even Ctrl+Alt+b_space does not work when this crash happens!! (so, I have to go ahead and reboot the system using the power button everytime) This I find very strange, since if at all, I should have been able to kill the process and restart X.
This seems to be an extraordinarily long thread, but I have put in whatever I thought could be useful info I should give. I will appreciate any help in resolving this issue.
View 3 Replies
View Related
Mar 1, 2011
Less than 2 days ago i upgraded from slackware 13.0 to 13.1.Since then, I have not been able to use my laptop for more than 15-20 minutes, 'coz the KDE screen freezes all of a sudden without any crash report and in some time the screen goes blank with just a mouse pointer to be seen (Black Screen of Death?)I can do a CTRL-ALT-F* to switch to a console a continue, or reboot (using console) to get the X server started again. (CTRL-ALT-Backspace does not work either).
View 9 Replies
View Related
Apr 12, 2010
Code:
I'm using slackware64-current.
View 2 Replies
View Related
Feb 10, 2011
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
View 4 Replies
View Related
Jan 13, 2011
on a fresh install of slackware -current x64, the first thing that i did was download and install opera. now, whenever i start kde, and run opera, X crashes with lots of crazy errors, usually in the format of:
/usr/bin/akonadi*whatever* cannot connect to x server :0
/usr/bin/akonadi*whatever* has crashed too many times and will not be restarted.
and then i get spat back out at the CLI. opera works fine in the other Desktop Environments, and i'm posting from xfce right now, so i know its an issue with akonadi. i would like to use KDE as my default desktop, but i dont want to use it without all of its features
View 2 Replies
View Related
Apr 6, 2011
I'm running Slackware64-current. The newsreader pan crashes in the moment when I click the send-button. The message is sent anyway.
View 2 Replies
View Related
Mar 11, 2010
I have installed Slackware x86_64 in my computer and everything was fine until I realized that the flash plugin didn't work well. When I want to play a video on ..... the browser crashes. I installed the flash plugin from Slackbuilds. In the Slacbuild file I just check the version and set ARCH to x86_64, What can I do?
View 15 Replies
View Related
Jan 23, 2010
I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.
View 14 Replies
View Related
Jun 26, 2010
I have had slack 12 on this computer for quite a while with never a problem. Slack 13.1 was installed a few weeks ago without a problem, it seems to run forever as long as it is root. When I go to user it will crash 2 or 3 times a day. When it crashes it is a total lockup that only the off/on switch will reset it. There is no certain time or thing that causes it, it will just lockup while surfing using the command line switching or opening a new le. Any suggestions will be appreciated! I have googled and searched with no info found.I do have 13.1 on another computer that works fine, it has an nvidea video card in it and it is 64 bit.
View 12 Replies
View Related
Nov 26, 2010
I'm having, oddly enough, stability problems on my main slackware desktop. Whenever I try to do certain things, for instance going fullscreen on a flash video, starting regnum online or open arena, it drops out of X into the command line with a few error messages (next time it crashes I'll post the messages). On occasion, it'll do that without any input. Now, there's a few major changes I've had on the desktop since yesterday, chiefly that I've been able to connect it to the net for the first time in a few months. Now because of this, I've been installing plenty of software from slackbuilds, plus flash from adobe (necessary evil). I'm using xfce with some compositing on a geforce Ti 4200 AGP 8x 64Mb with nvidia drivers installed and dual monitors, each now set to 1280x1024 and in twinview, pentium 4 2.8Ghz, 1 GB ram. HDD has a 70GB ext3 slack partition, triple booting with 80GB ext4 ubuntu lucid partition and 40GB ext4 mint isadora.
View 10 Replies
View Related
Dec 3, 2010
I am trying to switch to KDE4.4.5 on my main machine. I installed the KDE packages and also the german language file. Everything works fine except the language settings. When I try to start it crash and a KDE crash dialog opens that gives this "developer information":
Code:
Application: System Settings (systemsettings), signal: Segmentation fault
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.2200.5-gdb.py", line 9, in <module>
from gobject import register
[code].....
It works on my netbook. I run on both machines Slackware 13.1. The only difference I can think of is that KDE was pre-installed on my netbook and I just upgraded it. On my main machine I installed all packages except the packages of kde and kdei.
View 2 Replies
View Related
