Slackware :: Installed - 64 - Dolphin Crashes Many Times
Nov 1, 2010I've installed slackware64 up to date and have a annoying problem:
Dolphin crashes many times.
Here is some debug info:
ADVERTISEMENT
Slackware :: Dolphin Crashes And Dbus
Oct 6, 2010I am running 64-bit current. I have not identified which update started the Dolphin crashes, but it recently has been happening very often, usually within a few seconds of starting it, but not always.
Googling suggested that it might be a dbus issue, so I rolled my own package using dbus-1.4.0 and the slackbuild from the 64 bit current source.
Dolphin has been rock solid since. I noticed that there was an 'allow root globally' patch which I commented out. I am guessing that this may affect applications that I have not used yet or the issue has been fixed in version 1.4.
I have not seen any evidence that other current users have had this problem, but maybe Robby would consider an upgrade?
OpenSUSE Install :: 11.3 - Installed Several Times And Each Time System Freezes/crashes During Boot
Dec 7, 2010LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies View RelatedSlackware :: Installed The Latest Changes To Current - X Crashes And Reports A Segmentation Fault, Address Nil
Nov 14, 2010X crashes and reports a segmentation fault, address nil. I've been using the generic Radeon driver without any problems, until now.
View 14 Replies View RelatedUbuntu :: Dolphin Crashes When Run As Root?
Feb 13, 2010Since installing upgrades including KDE4.4 and having to reinstall plasma-desktop, when I launch Dolphin file manager via alt-f2 it always crashes. In the status at the bottom is reads...
" The process for the file protocol died unexpectedly. "
When I run Dolphin as my current logged in user there are no issues.
OpenSUSE :: Dolphin Crashes When Viewing Mounted Partition?
Jun 12, 2011I am having a problem with Dolphin where if I am trying to view the files in an extra partition I have mounted it crashes. It only does it on partitions not usually mounted at start up. The error it gives is:
Executable: kdeinit4 PID: 6209 Signal: Aborted (6)I am running fully updated openSUSE 11.4
Ubuntu Installation :: Dolphin Crashes On Any File Copy?
Aug 16, 2011I don't know where to begin figuring this out. On a total fresh install of kubuntu 11.04, everything went fine. When I do any copying in dolphin it crashes. Konqueror does the same thing. I installed samba and I can copy files when using samba from a remote computer, locally it crashes dolphin and konqueror. I turned off desktop searching, still crashes. I tried copying from konquorer to dolphin and vice versa, crashes everytime. The system notification acts like it started the copy and keeps whirring until I close it. What can I try?
View 6 Replies View RelatedUbuntu :: 10.04 Freezes Or Crashes Multiple Times?
Oct 12, 2010[Staff Note: This thread was spun off from here: HOWTO: Purge and Reinstall Grub 2 from the Live CD This solved the Grub problem but the crashes continue.]
Just as I get up and running again my 10.04 (64 bit) either freezes up totally, closes all windows that are open, fails to restart or shut down forcing a restart.
There's no pattern to it, i might be using the gimp or checking thunderbird emails, possibly just surfing or running bluefish. Nothing major and I'm not one to go delving under the bonnet so to speak and start tweaking things. I have the AWN dock installed and run a dual monitor setup.
Everytime it's crashed, the damn thing doesn't reboot, I get the init =bootarg message I've been reading a lot about and once again I have to run the liveCD and spend several minutes farting about purging and reinstalling grub.
I despise Windows, overall I am enjoying my ubuntu experience but things like this stop me getting any work done.
My PC ran fine for the last 2 days then suddenly it's playing up again. It's not an old machine, quad core processor, plenty of RAM.
I am having to back stuff up as soon as I do it due to so many crashes per day. I have reinstalled the OS and started again from scratch 4 times now in the last month.
The last thing I want to do is go back to Windoze but I am seriously running out of patience with ubuntu.
Boot Info Script Results:
Code:
# Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
code....
Debian :: Xorg Server Crashes At Random Times After Upgrade To Lenny
Sep 14, 2009I've just recently upgraded to lenny using aptitude (following the instructions on debian.org. All went smoothly, and almost everything is working fine.I have had my X server crash twice since then, both times when I simply doubleclicked a running application. There is some indication of problems in the Xorg.log file, but it's not helpful to me -- can you help me understand?
View 2 Replies View RelatedUbuntu Installation :: How Many Times Have Installed Packages Been Run?
May 27, 2010I was wondering if there's a package that can report on the frequency with which a program (e.g. gnuplot) has been run over, say, the past week, or month.
View 2 Replies View RelatedSlackware :: Dolphin Keeps Freezing With KDE 4.2.3+
Jan 10, 2010I've been ignoring this problem for about a week but its getting on my last nerve. Dolphin keeps freezing for about 20 seconds when ever I try to move or open files sometimes, It will just sit there and then once it returns it will very quickly execute my command. It seems im not the only one having this issue [url]
I still can't seem to find a fix. I'm running the most recent current BTW
Slackware :: How To Run Dolphin / Konqueror As Root
Feb 25, 2010I have been using KDE4 for some time now as a test and have noticed what at first seems to be a major omission. There is no way to run dolphin or konqueror as root. Old style KDE3 in SLackware 12 had the "root konqueror" option, (or whatever it was named in the KDE menus), but KDE4 doesn't have this. I tried adding a new menu itme in KDE4 to run dolphin as root but it had odd errors about "could not start process" and "could not to talk to klauncher" - it would not display any files from my directory. Konqueror had similar odd problems - something about klauncher and Dbus server. This is a pain as there are sometimes files I wish to move/delete which I need to be root to do and it would be nice to have a gui to do this.
Anyone got any quick ways (from KDE) of achieving this or setting up a KDE menu item to run a file manager (dolphin/konqueror) as root ? I don't always want to have to run "su -c mc" in a terminal to do admin stuff in the filesystem and I don't want to run KDE as root.
Slackware :: 13.37 - Strange Happenings In Dolphin
May 13, 2011My slackware 13.37 64 with 4 gig ram , has a strange thing in dolphin. My machine runs very well with kDE4.6.1 from alien and no other problems. When I copy files to a folder it does not show , I have to close dolphin and reopen to see those files. If I click on a compressed file and select extract folder here it does the same.
View 4 Replies View RelatedSlackware :: Does The 'SlackDVD' Appear In Dolphin But Not In Ls /media?
Feb 7, 2011I have set System Settings --> Advanced --> Removable Devices to 'Enable automatic mounting of removable media' --> 'Mount all removable media at login' and 'Automatically mount all removable media when attached'.
But, the SlackDVD does not appear in ls /media until after I double-click the 'SlackDVD' in Dolphin.
Slackware :: Set Some Times - 0?
Jul 11, 2011What I mean by this are two things:
1. When the computer boots and asks me to pick Linux or another operating system, how do I change the time down, since I don't really need 2 minutes to choose the only operating system I have...
2. When the computer shuts down, and gives me 30 seconds to cancel or not (this is with a GUI), how do I reduce that time to 0?
Slackware :: Access To NTFS USB Devices From Dolphin?
Aug 1, 2010I have some problems accessing NTFS USB devices from Dolphin. If I mount by hand the device, mount -t ntfs-3g /dev/sdc1 /media/disk I can access to the disk from Dolphin. mount command reports: /dev/sdc1 on /media/disk type fuseblk (rw,allow_other,blksize=512)When the same disk is mounted through Dolphin (by clickin on the disk icon), I cannot see any content. mount command reports: /dev/sdc1 on /media/FLS-U2-300 type fuseblk suid,nodev,allow_other,blksize=512,default_permissions)root@obelix:~# As you can see, mount command reports different configurations. I suspect the extra parameters used by Dolphine causing problems but I don't know how to configure KDE to change the mount options. This problem is new to Slackware 13.1. My previous 13.0 configuration had not that problem
View 6 Replies View RelatedSlackware :: Disabling KDE Dolphin Preview And Kio_thumbnail
Oct 3, 2010Hi everybody! I am completely stumped with KDE's Dolphin's preview policy. It started with me realizing that when as much as I mouse over an encrypted file (say, an ODS file created and encrypted with OpenOffice), KDE pops up a password prompt. The culprit identifies itself as kio_thumbnail. This is a feature so apparently useless, I would like to disable it no matter what. I know a work-around: hiding the Information panel seems to work. But I like the information panel. On top of that, the same kio_thumbnail does on occasion decide that my computer is underutilized (it feels like it happens during the idle times). It allocates my entire RAM, all 4 GiB of it, and does something fancy. It doesn't crash, however, and goes away a few minutes after I poke the computer.
I don't want a daemonized thumbnailer, is there a way to disable kio_thumbnail or make it be quiet and do nothing? I tried fooling around with Dolphin. I went into Settings / Configure Dolphin... and
1. Disabled all services,
2. Unchecked everything in General / Previews.
I did the same to Konqueror.
As far as I can tell, this had no effect whatsoever. Dolphin still previews all the files it previewed before, and still tries to preview encrypted files when Information panel is open. I am running unmodified Dolphin 1.4 on KDE 4.4.3, the same ones that came with Slackware 13.1 x64.
Slackware :: Dolphin Hang And Crash On KDE 4.5.1 - 64-current
Sep 15, 2010Is there any Slackware-current or Slackware64-current users in the LQ Slackware forum experiencing lags or slowdown on Dolphin file manager on KDE 4.5.1? I experienced this first on KDE 4.5.0, after the current update KDE to 4.5.1 I still have this problem.
Hovering mouse on a file can take a while, opening a text file with kwrite took several seconds and dolphin window will appear blank (like hang). Sometimes Dolphin crashed when opening file, changing directory or hovering mouse on a file.
Quick googling points to this discussion at http://dot.kde.org/2010/08/31/kde-releases-451 which suggest a bug in libdbus.
Slackware :: LUKS Decryption Fails In Dolphin?
Nov 25, 2010I've just did a fresh Slackware 13.1 install on a 32-bit box for friends of mine. It's an older machine with an AMD Athlon XP 2500. Generally everything works just fine, with one exception, however.Connecting a LUKS encrypted USB harddisk is notified by KDE. Clicking on the device icon in Dolphin opens the dialog asking for the LUKS passphrase. No error message appears, but the file system is not opened and mounted, anyway.However, before another attempt I have to "remove" the device in Dolphin.Output of dmesg:
Code:
# Nov 25 23:58:24 mycomputer kernel: device-mapper: ioctl: unable to remove open device temporary-cryptsetup-3023
[code]....
Slackware :: Right Click Mailto Functionality In Dolphin?
May 27, 2010Is there anyway to right click on a file in the Dolphin window and select mail to: then kmail should open and the file gets mailed accordingly.
Or some way to implement this?
Fedora Installation :: Installed F On Ati Radeon HD 5145 - Setup Just Hangs Up Some Times
Jun 14, 2010I have an urgent major problem. I tried to install F8, F9, F10, F11 and F13 live but all gave the same problem, which is I can't install the OS.the problem is Fedora can't communicate with ATI Radeon HD 5145.....the setup just hangs up some times hangs when it tries to run anaconda....
Now F10 X86_64 was installed normally, but after the first reboot.. it gone crazy...and started to display rubbish...going to init 1 and trying to run the GUI I got error server X.
Also ubuntu didn;t work too
My laptop is
Toshiba Satellite L650-10M
Intel CoreTM i3-330M Processor (2.13GHz , FSB:1066MHz , 3MB 2nd Level Cache)
Memory 2,048 MB DDr3 RAM (1066MHz) System Memory
320GB Hard Disk sata
ATI mobility Radeon HD 5145 , 512MB dedicated Up To 2,810MB Graphics
Wireless technologies 802.11 a/B/G integrated Wi-FiTM ;Bluetooth
Slackware :: Dolphin Only Opens Samba Shares Using Server IP?
May 10, 2011Dolphin will only open Samba shares if I open them by typing in smb://SERVER-IP. It also does not show up in the Network section of Explorer under Windows 7. How do I fix this? The only Samba share icon that shows up in Dolphin under Network --> Samba Shares is Workgroup. If I click it it changes smb://workgroup, but then it does nothing and shows no files. Here is my Samba server's smb.conf file.
Code:
[global]
workgroup = WORKGROUP
[code]....
Slackware :: Kick Off Dolphin From Terminal Emulator Inside KDE
Apr 8, 2010I try to kick off dolphin from regular user account after executing "su -" from terminal emulator inside KDE, but got a error:
Code:
Is this something to do with xwindow authorization?
Slackware :: Reading Cdrom And External Drive In Dolphin?
Jun 12, 2010I inserted a disc and tried to access it through Dolphin. It shows up in the directory explorer thing as a disc and with the disc name, but it has a little / thing in the bottom corner of the icon, and when I try to access it, it gives me this long error on the bottom of the file area (can't remember what all it said, something about 'harvey' and being unable to find the directory in /etc/fstab). The same thing happened with an external drive, which seemed to work fine before but now has the same problem.
View 5 Replies View RelatedSlackware :: Informed That Sftp An 'invalid Protocol' When Trying To Connect From Dolphin
May 22, 2010I downloaded Slackware64-current to give it a try on my laptop and all went well as usual. However when trying to connect to another computer from Dolphin via sftp I was informed that sftp is an 'invalid protocol'. I can use ftp, though. Same thing happens with Konqueror. Using Konsole I can successfully start sftp, although that is not exactly what I want or need. For me, this is really a major problem as my office computer can only be accessed at home via secure shell. I need to be able to upload/download files and folders from there and from other machines. I wasn't really aware of how heavily I depend on this until now. Has anyone else run into this problem? If so, is there a fix or a workaround?
View 3 Replies View RelatedSlackware :: Mime Type Error Opening Dolphin And Other Kde 4.4 Applications
Feb 11, 2010I did a clean installation of KDE 4.4 Alien bob`s packages and when I open the dolphin, for example, appears this error:
The icons and directories are all on blank...
Slackware :: Open Dolphin In Root Mode And Shortcut Command Line
Sep 11, 2010In order to avoid switching user, is it possible to open dolphin in root mode. If yes, what is the command, and the keyboard shortcut to enter it.
View 3 Replies View RelatedSlackware :: Dolphin Samba Share Firewall / Saying It Can't Find Any Workgroups On Local Network?
May 12, 2011I just set up my firewall, and now I can't see any Samba workgroups. It says it can't find any workgroups on my local network, and it may be caused by a firewall. It is a firewall issue because if I disable my firewall, I can see the workgroup. What do I need to open on my firewall to see the workgroup? I am using Slackware64 13.37.
Here is how I set up my firewall.
Code:
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT
iptables -A INPUT -p icmp -j ACCEPT
I got the commands from here url.
Slackware :: Severe Performance Degradation In 13.37 - Taking 2 To 3 Times Longer
Jun 17, 2011we bought a dual 12-core Opteron machine (Supermicro H8DGi board). Installed Slackware 13.37 and performed some few tests. We observed that performance quickly degraded as the box became loaded. For instance, a lonely task may took "t", but when running 24 of them at the same time (fully loaded box), it may took 2 to 3 times longer. From some test we did (tinkering with BIOS, moving memory modules, etc) we came to the conclusion the problem was due to a terrible memory managment. Finally we solved the problem by recompiling the kernel and taking the .config file from OpenSuse. Thus, there must be something to be tweaked in the standard Slackware .config file
View 8 Replies View RelatedUbuntu :: Installed 64-bit 10.10 Crashes During Boot-up?
Dec 22, 2010I installed 64-bit Ubuntu 10.10, but it crashes during boot-up. Installation was done through wubi 30GB option. However live CD worked fine.
Machine used: HP Pavilion dv3.