Slackware :: Frequent X Crashes Into Command Line With Error Messages
Nov 26, 2010
I'm having, oddly enough, stability problems on my main slackware desktop. Whenever I try to do certain things, for instance going fullscreen on a flash video, starting regnum online or open arena, it drops out of X into the command line with a few error messages (next time it crashes I'll post the messages). On occasion, it'll do that without any input. Now, there's a few major changes I've had on the desktop since yesterday, chiefly that I've been able to connect it to the net for the first time in a few months. Now because of this, I've been installing plenty of software from slackbuilds, plus flash from adobe (necessary evil). I'm using xfce with some compositing on a geforce Ti 4200 AGP 8x 64Mb with nvidia drivers installed and dual monitors, each now set to 1280x1024 and in twinview, pentium 4 2.8Ghz, 1 GB ram. HDD has a 70GB ext3 slack partition, triple booting with 80GB ext4 ubuntu lucid partition and 40GB ext4 mint isadora.
When I open a gtk app from the command line this error pops up:
Code:
Gtk: Unable to locate theme engine in module_path: "clearlooks", and I can not find clearlooks theme engine anywhere as it is supposed to be part of gtk by default?
Every since updating to kde 4.3, I have been experiencing frequent X crashes (1-2 times a day) whenever compositing is turned on (nvidia card). I was hoping that kde 4.3.1 would fix the issue for me, but no luck. So, I'd like to figure out what the nature of the problem is so that I can report it to the appropriate (ahem) authorities, but am not exactly sure how to dig up any useful information. The Xorg log didn't *seem* to have anything particularly informative to say about it (just a few lines about nvidia_drv.so).
I experience X crashes on a frequent level. First it happened with the current stable nvidia 180 driver, and the nonfree flash player (....., vimeo, etc). I replaced the stable nvidia driver with the 180-dev driver which fixed the flash problem. However it still happens that the X chashes without any reason or pattern. One time it crashed the moment I wanted to save a PDF file to my HDD downloading it with Firefox, another time it crashed while idling. I use an Alienware M15x with a nvidia 260M. Compiz is installed and active. Which other data or logs do you need?
I am experiencing frequent crashes for my browsers (FireFox, Opera, Konquerer). It doesn't seem to be related to the amount of tabs I have open, sometimes it will crash on 1 tab, and sometimes it is fine to have 20 tabs up. In addition to this, some flash videos hang after 3 secs.
PC spec: OS: SuSE 11.2 (x86_64) GUI : XFCE (KDE 4.0 back up) Intel Q6600, 2GB Ram DDR2, 9800GX2
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
Slackware 12.0 (GNU/linux kernel 2.6) I am said slackware is very stable (I suppose this means it has few bugs). However, every time I run startx to start the graphical interface, for a brief moment I can see (just before the screen is put in graphical mode) a lot of error messages. How can this be? I use slack 12 a lot and have reinstalled this distro many times. However the described behavior always repeats.
I'm running a gateway - router pc with slack13 32bit on a pIII PC. I am using huge.s kernel. Apart from a firewall script, I have installed ulog deamon. I am also using the pc as a transparent proxy, a dns cache and a vpn server. So I haven't installed weird stuff. I have not installed X or any desktop environment. I get unexpected reboots however, and /var/log/messages does not state anything, not dmesg does. I am thinking of running a disk test on each disk ( one OS disk and one disk for the squid cache) and a memory test. I am not sure its a hardware issue (like the PSU, disk or RAM) because I used to let this pc ON for several weeks even before I started configuring it... and I couldn't hear anything wrong. Now I get to hear disks spinning down and up again, and even that very first boot sound you hear when you switch on the PC.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:wine_snd_pcm_recover underrun occurred err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
Whenever I used "Ctrl+S", "Ctrl+O", or any other keyboard command that opens a KDE FileDialog, OpenOffice crashes every time. OpenOffice produces the dialog closes it and produces another two and then crashes. This happens from every OpenOffice program. Running OpenOffice from the terminal, the error that it outputs is "Failed to Create XIC".If I just access the same commands using the mouse such as Clicking "Save As", "Open", or any other command that opens a KDE FileDialog OpenOffice does not crash.The error is very similar to that of "http://web.archiveorange.com/archive/v/wmeLD7sxJO78TtWLhIm8".OpenOffice 3.2.1scim 1.4.7-174.1KDE 4.4.4openSUSE 11.3 64-bit
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
Anyone know any good command line music player, that can play mp3's and wav files? Also, anyone know any good command line msn messenger? I want those two softwares for Slackware 13.0. Lately I've been going crazy about command line softwares. I intend to really abuse of the command line environment. I find it so usefull.
I've been searching for hours now on how to start compiz from command line and configure the plugins. I just want to use the compiz core package in Slackware (no add-ons for now). I've figured out starting compiz
Code: compiz --replace and the windows decorator
Code: gtk-window-decorator --replace kde-window-decorator --replace for gtk based or kde respectively. I know how to start the plugins (by putting their names in the compiz command), but not what all of their command line names are.
What I'm looking for is all the console names of the base plugins (and eventually the others too), the order they need to be started in (if any), how to automatically start compiz when X starts, and how to change plugin settings (all without ccsm). How to do the above stuff without the use of a graphical tool.
So, in finishing my nFlux slack current edition.I have set it up for users to do certain things in console and one of the things I want is a way to view slackbook-2.0 in runlevel 3 console.I cant find a pdf reader that works in command line mode and I cant figure out how to either convert slackbook 2.0 pdf into html/text Or find a slackbook download that is html or text?I tried converting it using pdftotext, which didnt work very well So, I need a command line pdf viewer or a converter that works good?
Using the most recent -current/13.37, I'm curious if there is a New Right Way to suspend as a regular user from the command line, now that we've got PolicyKit/ConsoleKit running the show. I've seen some things (e.g., on the Archlinux wiki) that seem to come close, but require UPower. For some reason I can't wrap my head around the PolicyKit documentation well enough to figure this out.
My old solution was to add a line to /etc/sudoers giving anyone in the power group access to pm-suspend, pm-hibernate, and shutdown, and this is probably what I'll end up doing with 13.37.
I am trying to get my standard PS/2 Wheel mouse working on the Console command line, and seem to be having major problems getting it to work.
For the record, I am NOT talking about X, Xterm's or any Graphical Interface, my mouse wheel works fine in these environments.
I am purely concerned with getting the mouse wheel to work on the Console.
After many hours of reading forum posts about getting the wheel to work on the Console, this is what I have tried to date:
1. I have downloaded and installed every version of gpm I could find in the hope that one would utilise the wheel. (No Success).
2. I compiled and installed the latest version of gpm stable (1.20.6) to see if the wheel would work with it. (No Success).
3. I have tried setting up gpm-1.20.6 as a repeater to X, using every string I could find (msc, ms3, pnp .. etc), as well as every /dev entry in xorg.conf /dev/mouse, /dev/input/mice/, dev/gpmdata/, /dev/psaux ... etc). (No Success).
4. Created directories and configured a gpm.conf to both /etc/ and /etc/conf.d/ in the hope that gpm was looking for them there (read that in one forum or another). (No Success).
5. I then tried to find mouse wheel patches for gpm, and then downloaded the relevant version source gpm.***.tar.gz to go with these patches. Nearly every single one of the patches failed to apply (using patch -p1 >), except for one version I tried that did apply ... but then failed to make (stating that the source had a different signedness or some such thing) ??? (No Success).
6. I looked into IMwheel, but that seemed to be a purely X program that was a lazy way of writing ZAxisMapping in xorg.conf. (No Success).
So now I am stumped ... Does anyone know if if is possible to get:
a). A Wheel Mouse Patch for a recent version of gpm (1.20.6) that will actually apply, and then make?
b). A prepackaged recent version of gpm-1.20.6.tgz that has been patched to enable the wheel that I can use?
c). Any other information that may enable the mouse wheel to start working on the console.
I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.
Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
I install software called Sunflow v0.07.2 in my Ubuntu. When I try to run it,it says "API error : JVM available memory is below 800 MB (found 728 MB only). Please make sure you launched the program with the -Xmx command line options". What is that xmx command line.What should i do to run Sunflow.
I am not familiar with Linix server, I have installed ubuntu server for study purpose. Now I am facing problem when I install openssl from command line. This is the error message:
openssh-server : Depends: libwrap0 (>=7.6-4~) but it is not installable E: Broken packages
I have copied over my .gnupg files from a computer to a new workstation that is running Mandriva 2010.2. I am running Thunderbird as a mail client just as before and got Enigmail installed and running fine. The problem I get is when I send a message off with a digital sig it returns this error:
Send operation aborted Error - bad passphrase gpg command line and output: /usr/bin/gpg gpg: cancelled by user
It does not give me a chance to enter in the passphrase. I copied over the .gnupg files to my Ubuntu laptop running Thunderbird with Enigmail and I have no problems. Could there be an issue going from 32 bit to 64 bit? I checked out the forums and found no answers.
how to login through cmdline in grub.I tried some of codes but failed.codes were-grub>set root=(hd0, grub> linux /vmlinuz root=/dev/(sda, ro error;no such disk
I've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
I am having memory problems on my old Compaq PC, and am trying to run memtest86+-4.20 to check it. I downloaded the source file, and tried a compile, but had the following problem:
I have compiled both gocr and subtitleripper from [URL] and I am running into a problem with one of the scripts run from subtitleripper: pgm2txt. The error is:
Code:
andrew@skamandros~/Desktop/Labyrinth/subtitles$ pgm2txt -f en fauno /usr/bin/pgm2txt: line 165: unexpected EOF while looking for matching `"' /usr/bin/pgm2txt: line 179: syntax error: unexpected end of file
Support for this program is not available and development has ceased a while ago so I have had a look at the script itself and I cannot see the error in syntax.
I am very new to shell scripting.How does one pass a command-line parameter to a shell script?for the below program #/bin/bash mount -t cifs -o user=ramkannan,password=Linux123@ //10.200.1.125/ramkannan /MT cd /MT/test date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"` mysqldump -uroot -pram2@ employeedb > $date.sql gzip $date.sql
I want to pass parameter for everything,i tried in google and did but iam getting error while passing parameter to all
#/bin/bash mount -t cifs -o user=$1,password=$2 //10.200.1.125/ramkannan /MT cd /MT/test date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"` mysqldump -uroot -pram2@ employeedb > $date.sql gzip $date.sql
i was getting error while passing parameter to all.
