When I open a pdf file (e.g., beamer file) using xpdf, there's an annoying window on the left displaying section headings. Presumably it's possible to close it, ideally toggle it closed and open with a key binding, but I can't find out how to do this.
View 4 RepliesI like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
KDE and Windows7 both have a nice feature/setting that lets you maximize a window to half the screen by dragging it to the left or right edge of the screen.
Edit: Use Compiz Grid:
Code:
sudo apt-get install compiz-fusion-plugins-extra
Since the incedent described in this thread:[url]
X just freezes whenever I close a window, I have to kill X when that happens. For some reason it doesn't do that in TWM, though.
Start xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
I would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies View RelatedI am using CentOS5.2 and gnome 2.16, sometimes (not very often) when I open something and close it by clicking the CROSS on the top-right corner. The application crash and I lose all control (no keyboard anymore), I have to reboot the system by reset the machine. What's going on?
Yesterday, when I logon as root and run service setup, after I uncheck a sevice in the list and then start it, I click the CROSS on the top-right corner of the window, it popup a window (in the background) to ask me to save it or not, but then I total lose the control, no mouse, no keyboard. I try to reset the machine many times, but everytime when I repeat the same operation, it crash again. Seems that if I don't close it, everything would be fine!!!!
I am running a program in gnome-terminal window (using metacity window manager) which will take many hrs to complete.
I was wondering if there is some way to "lock" that window, so that accidental closing of that window is prevented.
Is there a way to identify and close a given instance of an open nautilus window from a command line?
Or can one identify via a command line that a given instance is open?
I'd like to tag one when it is open with a specific title and then if that is already open not open it again all from the command line.
So far so good on the compiz effects but I couldn't figure out the fire effect when you close a window in compiz.
I looked everything in the compiz fusion menu but still couldn't find that effect out.. I have every plug-ins I believe in the compiz)
I've been running Ubuntu on my laptop for a couple months now and I've been using compiz settings manager. For some reason I can't seem to get the window effects for minimizing, closing, etc. to work. I have followed a few tutorials and nothing seems to make any difference. As far as I can tell, that is the only thing in compiz that is not working. I am running Ubuntu 10.10
View 4 Replies View RelatedI cant see any closing ,Minimize,Maximization buttons on any window I had replaced my monitor with other crt am closing by using alt f4 and from file quit now
View 3 Replies View RelatedI have a bash script and I'm dropping a file on script launcher shortcut. Everything seems fine, only that after executing the script console window closes, so I can't see if some messages were produced during execution.
As I just recently switched from Windows, this kind of problem is solved there by adding 'pause' command in batch script, on which user has to press key and script will then continue (finish) or by launching through 'cmd /k' which makes console window persistent.
Googling I found about 'sleep' command and more appropriate for me 'read' command, so I did this:
Unfortunately, I can't see any effect of 'read' command as console windows again terminates after execution. Execution is successful BTW. So what's the catch?
KDE tends to freeze momentarily after performing some tasks, like closing a window, pressing a button that should result in an option pane being popped, or simply trying to drag a window around the desktop. It doesn't happen every single time, but it's very persistently. I first noticed that the mouse would freeze sometimes when I do something like close a window and it takes 3~4 seconds for me to get control back, and for the task that I requested (close a window for instance) to be carried out.
During this time, I notice that all of KDE freezes up because my binary clock widget freezes as well. Is this a known problem with KDE? Can somebody give me some advice as to what might be causing this behaviour? I recall having similar problems back when I first tried 11.0, but back then it was so bad that I ended up going with Gnome. Now KDE has me hooked again, except for this one niggling issue. If I can get this resolved, then I think I will finally have an absolutely stable linux desktop.
[Code]....
I seem to have lost the closewindow cross from my browser tool bar (which is hugely annoying!) - how do I get it back please?
Ive also lost minimize maximise
if I hit F11 then push the mouse off the top of the screen the whole window moves up and I can see minimize/maximixe/close then.
So I have these three bars that I suppose are some kind of left over fragment of windows I had up the last time I rebooted. Anyhow, whenever I boot now, these three bars show on my desktop, and I cant get rid of them, they dont have the minimize, maximize or close buttons. Yet when I click the, "show desktop" buttom, they then minimize. HOwever, they don't show up on my window list. I've tried restarting my xsession and that didnt work, I've restarted nautilus that didn't work, I cant right click on them, I already tried xkill and force quite and that doesnt work. They're just always there.
View 2 Replies View RelatedI have been using Ubuntu for a week and getting on well with it. After reading reviews I decided to try Kubuntu. I installed it from the terminal and all seemed to go well. Now when I start the computer and select ubuntu it goes to a log in screen. I type in my user name and password and all I get is a terminal screen in the top left. If I close this I go through a 'broken screen' and back to the sign in.
View 1 Replies View RelatedYou maybe know that VirtualBox has an "immutable" feature for HDD images. I.e. setup the system, if the stuff is in place, you can set the image to IMMUTABLE to prevent any changes to the image. Differences are written to a separated image. So on the next boot you'll see that all the (unintended) changes are gone and the "old" system is up & running again. I run an old SuSE 10.3 on a write-protected SD-IDE-Adapter. Changing and playing with RPMs is a mess due to around 50 changes I had to do to make that work. Is there any option to mount an SD-card as RO and having all the changes written to e.g. /dev/sda3? To make it clear: I thought about something like a RAID-X system, but could not find any description on how to setup a raidtab.
View 3 Replies View RelatedIt all started when I couldn't set up my Unity bar to touch only and not the slide across for the dock. I tried installing Compiz, but it failed so I uninstalled it along with Unity and reinstalled them both. What I am looking at now is a panel-less desktop with only my background and 2 files on my desktop. Also, when I bring up the Change Desktop Background, it has no top bar consisting of the X Minimize or maximize buttons.
View 1 Replies View RelatedI have noticed that,in Ubuntu 10.10 Maverick Meerkat,the windows have their 3 buttons[maximize(a square),close(x) and minimize(-)] at the left(like in MacOS),while in earlier Ubuntu versions(for example,8.04 Hardy Heron),these buttons are at the right(like in the Windows operating system).Why did the developers of Ubuntu do this change?
View 6 Replies View RelatedI don't like the window controls switch from right to left...made in 10.04. Easy script to move the buttons here. [URL]
View 9 Replies View RelatedI can put them on the right using gconf-editor. But every time I change theme, it goes back to the left. It's annoying. Is there a way to fix them permanently to the right?
View 6 Replies View RelatedHow can we fix this? I am using Ubuntu Lucid, and maverick in a couple of minutes, once the upgrade is completed.
View 9 Replies View Relatedclose buttons on the left with xfce4? I do not want to use the system boarders, I want to use the compact mode, that is the point of using chrome. I know it can be done, that is how it is in gnome with the Ambiance theme and such. I have already gotten all the other buttons on the left, but the chromium ones wont budge.
View 4 Replies View RelatedMy little girl played with my keyboard and mouse and moved my entire screen to upper section. I tried everything, and can't figure it out how to bring it down. I see black color trough half of my display. I can go blindly in upper section without being able to see, and from time to time click the shut down bottom. Do you any of you have idea how to fix it? Ubuntu rocks, I love it, very stable, solid rock.I twill never use anything else.
View 1 Replies View RelatedI have a bit of a problem w/ the windowing UI when I drag any window left, the display gets messed up (see attached screen shot). It doesn't matter what the program is, even happens in explorer. I've done some searching of the Internetz and this form and all I could find was this bug, that doesn't have any updates on it:
Does anyone know of a fix for this? I can make the lines go away by triggoring a repaint (by either dragging another window on top of this one or minimizing and maximizing the problem window, but it's still a bit annoying.I'm running Fedora 14 and have ran all of the updates it prompted me to run.
Is there an easy way to move the buttons to the left like in Ubuntu?
View 4 Replies View RelatedI generally use dolphin as a file manager under KDE 4.4.1.
This is set up as a split window. Now, whenever I open dolphin, the right hand window is the "active" one. How does one make the left window the active one by default?
just upgraded to 10.04 - everything seems to be working OK apart from the 3 icons (close, min & max) have moved to the top left of the windows.
View 4 Replies View RelatedI have Ubuntu 10.04 and I use a left panel to show window selector.
I have the problem that Window Selector continuously change the window list from one column to two columns of windows icons.
It is so impossible to click on a window icon to select it.
I've tried to set the size to larger and different sizes. I've tried to show or hide the panel. I've tried to group or ungroup windows.
Is there a way to tell windows selector to stay in one column windows list?