Server :: Top Doesn't Load Saved Config

Aug 5, 2010

I've been building up my second gentoo system, and I've found a strange issue with top. Basically I'll load it up, configure it how I want it, sorted by CPU, set the colours etc then I'll save the config via 'W'. On my old system when I quit out and load top, it automatically loads up my settings from the ~/.toprc file - I dont recall setting this up at all, but maybe I have and just dont rememmber.Eitherway, on my new system it just ignores my toprc file. I can't see anything in the settings to choose a default file to load, and so am a bit confused by this issue.

View 5 Replies


ADVERTISEMENT

Server :: Edited The Config Files Because Xx.xx.xx.xx Doesn't Exist?

Aug 25, 2010

I'm taking over as a Linux admin where they use sendmail last week. I've done very little with email on linux, and haven;'t touched sendmail since 2000 so I am really out of my element.Basically the sendmail server for many months has had performance problems, disk, and load.Looking into it I found this doing a tail on /var/log/MaillogAug 25 17:11:49 web8 sendmail[1531]: o7OGF2VH002566: to=postmaster, delay=1+01:58:10, xdelay=00:00:00, mailer=relay, pri=2388694, relay=[xx.xx.xx.xx], dsn=4.0.0, stat=Deferred: [10.10.20.107]:No route to hostAnd that was all it was spewing, I edited the config files because xx.xx.xx.xx doesn't exist. And running m4, then restarting sendmail.It is still spewing out that message, but I do see some things connecting to the new yy.yy.yy.yy address. I even greped the entire /etc looking for the old machine.

View 2 Replies View Related

Ubuntu :: Postfix / Dovecot Config - Send Mail From Iphone Using An Account On Server Doesn't Work

May 15, 2010

the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>

View 1 Replies View Related

Ubuntu Installation :: How To Load Kickstart Config File - Refuses To Load File / Launches Generic Install

May 6, 2010

I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.

View 1 Replies View Related

Ubuntu :: Windows Doesn't Recognize Files Saved?

Aug 4, 2011

I've had a problem for a while-- when I save files on a USB stick in Ubuntu, then put it in a windows computer, it doesn't recognize the files. It only recognizes a video file that I have, but not the .doc files. The folders either don't appear or only appear as shortcuts.

View 9 Replies View Related

Ubuntu Security :: Create A Firewall And Have It Saved So It Doesn't Get Lost Through Reboots

Sep 9, 2010

What I would like to do is create a good firewall and have it saved so it doesn't get lost through reboots. I have read the iptables document and the ufw document but it's still a bit confusing.

What I would like to do is be able to browse the web so I need to have rules for that as well as https. I'm not sure what rule I need for DNS for DHCP. Other than those basics I don't want anything else to happen save for updates. When I get more used to it I will add more rules if I need them. I also want IPv6 off, for incoming, outgoing and forwarding, and my guess is that I do not need any forwarding for IPv4. Ah yes and I need the loopback working.

iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP

[code]....

View 5 Replies View Related

Ubuntu :: Connection - Load A Website Taking To Long To Respond And Sometimes Doesn't Load

Oct 2, 2010

When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct

I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.

View 2 Replies View Related

Fedora Installation :: GRUB Doesn't Load - Make Load Again Upon Booting?

Feb 9, 2009

I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:

[Code]...

What do I need to do to make GRUB load again upon booting?

View 2 Replies View Related

CentOS 5 :: Svn Server Config - Understanding Location Svnpath Parameter On Svn Config

Sep 7, 2009

I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config

[Code]...

View 1 Replies View Related

Ubuntu :: Flash Doesn't Load And The Light At My Webcam Doesn't Switch On At All

Jun 4, 2011

I've used this video conferencing web app on Windows 7 and it works perfectly. [URL] But I'm having flash problems. Flash doesn't load and the light at my webcam doesn't switch on at all. Things to note:Cheese works so I know my webcam in Ubuntu is functional. I've tried purging the flash plugin and reinstalling it. It doesn't work on Chrome and Firefox so it's definitely only a flash problem. I'm not using any medication so I know it isn't me just imagining it. EDIT: I checked out [URL] Here's a screenshot: [URL] I'll check back later, Charlie the Unicorn just rang my doorbell and invited me to tea on the magic hot air balloon. Definitely not hallucinating. Definitely. Definitely.

View 9 Replies View Related

Debian :: Alpine Will Not Load Remote Config?

Sep 28, 2010

For the last week alpine has been refusing to load a remote config files using the command
alpine -z -p {imap.gmail.com/ssl/user=username@gmail.com}remote_pinercit just ignores the -p flagbut will work if alpinef is used (alpinef calls alpine set to use function keys for issuing commands).

View 1 Replies View Related

Ubuntu :: Ntfs-config Fails To Load?

Jan 17, 2011

wandering what this means when i try to run ntfs-config?Quote:

Traceback (most recent call last):
File "/usr/bin/ntfs-config", line 102, in <module>
main(args, opts)

[code]....

View 1 Replies View Related

Slackware :: [Bug] Qtconfig Does Not Load Config On Startup / What To Do?

Apr 17, 2011

The program "qtconfig" does not load saved config on startup.

I just installed slackware-current from today's update (mirrored from ftp.slackware.com). The program "qtconfig" seems to have saved my changes to "~/.config/Trolltech.conf". However, after restarting qtconfig all options become the defaults.

I verified this in both the C locale and a UTF-8 locale.

Another computer of mine has a -current system from a few months ago and doesn't have this problem.

View 2 Replies View Related

CentOS 5 Server :: Samba Config Doesn't "understand" Smb.conf Lines About "recycle"

May 5, 2011

Samba is working fine, and I haven't used the config utility for some months now. but today, in trying to create another share, a warning dialog is displayed about lines that are not "understood". What is wrong and why is this happening now?Here are the lines from the warning dialog

297: recycle:repository = .deletedlou/%U
298: recycle:keeptree = Yes
299: recycle:touch = No
300: recycle:versions = Yes

[code]....

View 1 Replies View Related

Debian :: Can Load System-config-samba Package Under Wheezy?

Mar 15, 2015

I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).

Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...

View 1 Replies View Related

CentOS 5 :: Fontconfig Error: Cannot Load Default Config File

Nov 18, 2009

I am getting a strange font problem (see attached screenshot) for a user logging in over VNC Server, I am also logged in over VNC however I am no experiancing any problems... This was the case on CentOS 5.3 and on 5.4. I have tried removing the .vnc dir in the users home dir and re running vncserver so that it recreates it, I found this in the logs:

1. (nautilus:14718): Pango-WARNING **: No builtin or dynamically
2.loaded modules were found. Pango will not work correctly.
3.This probably means there was an error in the creation of:
4.'/etc/pango/pango.modules'
5. You should create this file by running pango-querymodules.
6.Fontconfig error: Cannot load default config file

[code]....

View 2 Replies View Related

Ubuntu :: 10.10 CUPS Server Not Saved?

Nov 16, 2010

I have a fresh install of Ubuntu 10.10 64, and when I change the CUPS-server via system->administration->printing->server->connect, the new list of network printers loads up correctly.But when I close the window and reopen it, the old CUPS-server is back, so it seems that the change isn't saved anywhere. Rebooting doesn't do anything.

View 1 Replies View Related

General :: Crontab Saved In Case Of Server Restarts?

Aug 10, 2009

Is the crontab saved in case of server restarts?

View 2 Replies View Related

Server :: Mysqldump: Special Chars Are Not Correctly Saved?

Feb 18, 2011

I have some tables that contain special characters from different languages like German, Italian, Russian, Spanish etc. They are stored and displayed correctly.

When want to backup my DB like "mysqldump -h localhost-u root -p dbname > dbname.sql" the special characters are lost, they are not correctly stored nor displayed in the sql file. This means there is no possible restoration.

View 3 Replies View Related

Ubuntu :: Restore Default Panel - Message Appeared On Boot Up Saying A Config File Was Missing Or Couldn't Load

Sep 1, 2011

I recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop

How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)

View 5 Replies View Related

Fedora :: Why Config.h File Doesn't Exist

Jul 30, 2010

i was assigned with a project to analyse the performance of ASSP mail filter engine.I am using Fedora 7 with KDE3.5. I need to install a lot of perl modules to run the assp.pl code.I was trying with all sorts of packages like src.rpm, ixxx.rpm, tar.gz, tar.bz2. All these packages doesnt work exactly. When i tried with rpm packages. I am getting this error.

/*
[root@localhost RPMs]# rpm -ivh cyrus-sasl-2.1.23-9.fc12.src.rpm
warning: cyrus-sasl-2.1.23-9.fc12.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 57bbccba
1:cyrus-sasl warning: user mockbuild does not exist - using root

[code]....

So i checked for config.h file as given the directory but it was missing.I don't know why?

View 4 Replies View Related

OpenSUSE Network :: User's Home Directory Saved In Samba Server Not Locally

Mar 27, 2011

Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.

By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.

View 4 Replies View Related

CentOS 5 :: System-config-samba Doesn't Work?

Feb 24, 2010

system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.

View 1 Replies View Related

Ubuntu :: X Fails To Load With Nvidia Driver: "screen(s) Found But None Have A Usable Config"

May 8, 2010

My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:

Code:

(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification

[code]....

View 9 Replies View Related

Ubuntu :: GDM Doesn't Load / What To Fix It?

Jan 5, 2010

I'm posting on behalf of my friend who is very happy with his Ubuntu installation on his laptop.
However, he has one problem, and that is sometimes GDM doesn't load, and Ubuntu boots to a text-based login.
When this happens, he power-cycles the machine and more often than not it will work.
He is dual-booting with Windows XP.

View 4 Replies View Related

Server :: Config Apache Server To List Php, C/c++, Java Files As Regular Txt On Website?

Feb 2, 2011

I try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,

e.g /var/www/mydomain/pub

i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,

if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,

Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?

View 1 Replies View Related

Server :: Config Apache Server To List Php / C/c++ / Java Files As Regular Txt On Website?

Feb 23, 2011

config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?

View 1 Replies View Related

Debian :: Webpages Doesn't Load?

Apr 1, 2011

I use Debian 6. I noticed that when ever I try to open certain websites, the pages doesn't load at all. This happens when I try to open [URL] and certain other web pages. Browsers like chrome, epiphany, iceweasel, opera all had the same issue. The download speed is pretty normal. note that disabling ipv6 inside the browser configuration didn't help fight this issue.

View 8 Replies View Related

Ubuntu :: GUI Doesn't Load After Start-up?

Jan 2, 2010

I've just switched from XP to Ubuntu 9.1 on a relatively old computer (6-9 years?) yesterday, and everything worked like a dream. I've used my computer twice today and nothing seemed to be going wrong...but then came the problem. I haven't toggled with the settings too much since I'm still very new to Ubuntu, but whenever I log in with my password, the GUI doesn't automatically start up. I get the terminal in the right left-hand corner instead, and none of the fixes I've found so far have worked. I usually get some variant of an error message or my hostname doesn't exist.

I've tried:

startx
sudo apt-get install xorg
apt-get update
sudo apt-get install xserver-xorg
sudo dpkg-reconfigure xserver-xorg
sudo nano/etc/apt/sources.list

View 8 Replies View Related

Ubuntu :: 11.04 Doesn't Load The Interface?

Apr 29, 2011

I have installed the Compiz program and after 30 seconds the main bar disappear...so I restart the computer but when I log in my account ubuntu doesn't load the interface...there's only the desktop..

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved