CentOS 5 Server :: Samba Config Doesn't "understand" Smb.conf Lines About "recycle"
May 5, 2011
Samba is working fine, and I haven't used the config utility for some months now. but today, in trying to create another share, a warning dialog is displayed about lines that are not "understood". What is wrong and why is this happening now?Here are the lines from the warning dialog
system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
I've got a situation where I would normally use NFS, but cannot. So in it's place I need to use a samba share (even though it's linux -> linux). I need it completely open and world writeable as if I had done an rw in an NFS export. I thought I had it as when logged in as a user I can edit delete etc. however the apache user seems to be struggling with creating files. Here's my smb.conf as it stands.
[global] workgroup = WGRP server string = Samba Server Version %v security = user passdb backend = tdbsam unix extensions = no
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I've got Samba server running on CentOS box. Everything works fine when I use "path" parameter, but I think Samba should create /home dirs for clients automatically. It should look like this:
comment = Home Directory of '%u' valid users = @"Domain Group" browseable = no writable = yes
[Code]....
When I explicitly declare "path" param, it works ok. But I need PERSONAL home dir for every user separately, not one dir for everyone.
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
I have a Samba File Server that can authenticate users in my Windows AD to log into the server. Anyways, I have a good amount of Windows Admins on staff but our org wants to cut budget so our first "slash" as it were is cutting down the actual Windows based File Servers.So my question is, now that I have this test server up and authenticating for logins using Windbind....is there a way I can get system-config-samba to "see" winbind users and groups so that file servers can still be "point and click" for my Windows Admins?
How to make a Server of LOGIN / PASSWORDS for flexible linux machines? Samba config files for the server and the client. The clients, if no network, shall use the /etc/shadow.
1) RW public directory 2) R-public, RW-me 3) Private dir (my /home/me)
BTW, I set all file permissions (recursively) to 777 until I can get this to work...
1) So far I have got 1 samba share working Read only with the following: [Music]
[Code]...
Guests can read it okay but user 'JoeBleaux' can't write to it...
2) I can't get the public read-write dir to work, again, it can be read by everyone but no one can write to it. Here's my broken config for this share: [Uploads]
[Code]...
3) I can't get the private dir to work. Here's my broken config for this share: [HomeDir]
I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
I'm using ubuntu server 9.10 for a home build NAS. Everything is working great just have one more thing to figure out. I have Samba set up to access my files and I set up a recycle feature so anything deleted will get moved to a Recycled folder. (I learned this the hard way after hitting delete key by accident while browsing the shares in windows. Lost 100 GB of data)
Now it is for the most part working but the permissions on folders isn't getting set right. If I delete a file in a share I can go to Recycle bin folder and delete the file for good. But if I delete a folder I can not access that folder to delete or restore from the Recycle bin folder. I have to chmod the folder before I can do anything with it. Anything I can change to get folders deleted via windows to have the right permissions when it is moved to the Recycle bin folder?
I am running an application that requires use of my /etc/hosts file. In it, I have my machine name and its LAN ip address. The program creates a service on a specific port, then attempts to connect to it based on the host name. So my hosts file has to be correct.I added the nameservers to resolv.conf and now my application will not run. My guess is that the computer is checking the name servers first, timing out then checking the hosts file.Is there a way I can tell the system to check the hosts file first, then DNS. I thought it should behave that way by default, but it does not appear to.
All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
=============================================================== [2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42) INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
I've been building up my second gentoo system, and I've found a strange issue with top. Basically I'll load it up, configure it how I want it, sorted by CPU, set the colours etc then I'll save the config via 'W'. On my old system when I quit out and load top, it automatically loads up my settings from the ~/.toprc file - I dont recall setting this up at all, but maybe I have and just dont rememmber.Eitherway, on my new system it just ignores my toprc file. I can't see anything in the settings to choose a default file to load, and so am a bit confused by this issue.
I'm taking over as a Linux admin where they use sendmail last week. I've done very little with email on linux, and haven;'t touched sendmail since 2000 so I am really out of my element.Basically the sendmail server for many months has had performance problems, disk, and load.Looking into it I found this doing a tail on /var/log/MaillogAug 25 17:11:49 web8 sendmail[1531]: o7OGF2VH002566: to=postmaster, delay=1+01:58:10, xdelay=00:00:00, mailer=relay, pri=2388694, relay=[xx.xx.xx.xx], dsn=4.0.0, stat=Deferred: [10.10.20.107]:No route to hostAnd that was all it was spewing, I edited the config files because xx.xx.xx.xx doesn't exist. And running m4, then restarting sendmail.It is still spewing out that message, but I do see some things connecting to the new yy.yy.yy.yy address. I even greped the entire /etc looking for the old machine.
I am trying to install Koha on centos5.5. Afte installing myqsl it starts normally. But when i add following lines into my.cnf and trying to restart mysql again it says that restart is failed.
here is the lines that i add into [mysqld] section
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
don't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message
[root@server1 named]# service named restart Stopping named: [ OK ] Starting named:
I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related.So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller.My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working.So that leaves me to think that my caching server is not forwarding properly.
For example, this AD is going to have a naming convention of hostname.mydomain.local.If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local.However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain) Here is my named.conf file:
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
I am new to Samba.I'm running Fedora 10 and I've just download samba successfully and have the smb service running on my system.I'm in GNOME and select System and then Administration and Samba does not appear in the drop down menu.I have an NFS menu selection but no samba selection.I ran yum install and it installed successfully. If I can't get the samba config window is there a way I can configure in terminal window?
OS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none/var/log/messages
I'm trying to change some configurations but when I change it from the default options in main.cf, it doesn't actually update the running configuration. I've even restarted the server all together but it still doesn't update it.In main.cf, here is the configuration I've added:
I am trying to see if a can get a centos 5.5 server setup as an smtp store and forward spamfilter by following the Centos Wiki and the freespamfilter.org guide by Mr88Talent at [url], which relates to another linux distro.
The spamfilter is essentially working! however, i have one issue with DCC.
test problem:
I'm not sure if anyone else would be interested in a Centos version of Mr88Talent's tutorial, but a very rough and completely untested first effort is available at the following url: [url]
Any opinions on this setup or just a total slating of everything i have done wrong would be welcome as i don't want to waste time trying to use a setup that is just not going to be practical or reliable to maintain / keep operational.
I have read that yum update can break this type of system - which concerns me.
The intended use of the spamfilter is for a small business (only about twenty e-mail accounts). However, they still need to reliably receive e-mails (hopefully with less spam though).
I am currently using a command like this to remove blank lines and lines which contain (not necessarily begin) with a #. Is there a better/simpler command?
cat /etc/apache2/default-server.conf | sed /^$/d | grep -v '#'
