I have a fresh install of Ubuntu 10.10 64, and when I change the CUPS-server via system->administration->printing->server->connect, the new list of network printers loads up correctly.But when I close the window and reopen it, the old CUPS-server is back, so it seems that the change isn't saved anywhere. Rebooting doesn't do anything.
View 1 RepliesI have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
I've been building up my second gentoo system, and I've found a strange issue with top. Basically I'll load it up, configure it how I want it, sorted by CPU, set the colours etc then I'll save the config via 'W'. On my old system when I quit out and load top, it automatically loads up my settings from the ~/.toprc file - I dont recall setting this up at all, but maybe I have and just dont rememmber.Eitherway, on my new system it just ignores my toprc file. I can't see anything in the settings to choose a default file to load, and so am a bit confused by this issue.
View 5 Replies View RelatedIs the crontab saved in case of server restarts?
View 2 Replies View RelatedI have some tables that contain special characters from different languages like German, Italian, Russian, Spanish etc. They are stored and displayed correctly.
When want to backup my DB like "mysqldump -h localhost-u root -p dbname > dbname.sql" the special characters are lost, they are not correctly stored nor displayed in the sql file. This means there is no possible restoration.
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
I was using Red Hat 7.3 forever and decided it was time for a change. I went to Fedora 10 but it was really buggy. CentOS 5.2 is VERY stable.Here is my problem.The server is command line only -- I tend to hate GUI"S.I setup Samba no problem disabling the ports needed through the firewall and that was straightforward.CUPS is a nightmare for me since CentOS locks down the cupsd.conf and then the firewall does its thing. I allowed port 631 through the firewall but then got lost on the cupsd.conf. It's been too long and the old redhat one won't work with CentOS (not surprising since it's a VERY old system) straight-forward CUPS tutorial for a command line interface. I just need it to be:
a) do this
b) do that
Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
I'm trying to set up a cups print server on 10.10 server. When I run
Code:
sudo apt-get install cupsys
i get this error
Code:
E: Unable to locate package cupsys
I can find and install all kinds of other stuff and this is a fresh install.
Here's my /etc/apt/sources.list
Code:
#deb cdrom:[Ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code]....
I have a CUPS server on Debian, I am trying to connect from an Ubuntu 8.04 box. Here is my CUPS configuration file on Debian just in case it is usefull:
Code:
LogLevel warning
SystemGroup lpadmin
# Allow remote access
Port 631
[code]....
When I try to add a printer I have set up in CUPS from my Ubuntu box, it asks for the password for katie (this is the user that is logged in on ubuntu box) on 192.168.1.200 (CUPS Debian Box). The problem is, I don't have a katie user set up on the debian box, am I supposed to for this to work. Why is it even prompting for a password? Also, it won't let me change the name so that I can authenticate with a different user, it is not in a text box.
I'm not looking to setup a print server. I want to print documents TO an existing network printer while I'm logged in via ssh to my Ubuntu Server 10.4 command line shell. Things like admin emails, pdf docs, etc.
All the clients on my LAN are able to print directly to the network printer without any help from the Ubuntu Server. I don't want to setup CUPS on the server unless that's the only way to print from the server itself to a networked printer.
Do I need CUPS or can I print from the command line in some other way?
I've been trying to get CUPS working on a headless server, in order to share the printers connected to it with the rest of the network. The problem is that I can't add printers via the web interface, or rather, that I can log in, as it will not authorize my account. I've tried lppasswd, adding cupsys to the group 'shadow'(only to have the system tell me that there is no user called cupsys), and been editing the cupd.conf for hours. On top of all tha, I can't even get to the web-interface without running "/etc/init.d/cups restart"!
[Code]...
After a recent software update I can no longer connect to the Cups server.
My printer isn't listed anymore and won't let me add one.
Cups was listed in the update so i think the update broke cups.
I'm getting: "Failed to connect to server" when i try to connect to 'localhost'.
What can I do?
server not exporting CUPS printer?
View 2 Replies View RelatedAt my work we use CUPS to maintain all of our printers. I'd like to use Ubuntu to print a ton of files in a directory. What command would I use to print all files ending in ".html" to a specific printer? I tried some command and all it printed was stacks of pure junk. Is there an option to choose a certain tray to print from?
Would the command be
Code:
lpr -p(printername) *html
?
I have no idea how to specify a certain tray.
I have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
So I was trying to configure my CUPS server and checked the box marked "Use Kerberos Authentication." Now, I cannot change anything and get an unauthorized error every time I try. How can I remove Kerberos? I have access to the local computer as root and can use sudo.
View 2 Replies View Relatedserver not exporting CUPS printer?
View 9 Replies View RelatedI am unable to access cups admin via 631 port. Since I'm running non-desktop server I can't use localhost:631. In cupsd.conf I added a listen line for the client machine ip (the one I use to access cups) but no go. I also added Allow directives with this ip in the <Location> blocks. Nothing works. Cups server is running
View 3 Replies View RelatedRunning Debian 5, fairly new install. I have CUPS 1.38 installed. After much work, I got a PPD file for a Dell printer working - albeit not the exact one I need (5330dn), but close enough to work (3100cn). Question: when I look at the list of printers in CUPS, I see a bunch of extra printers that are on the network, but that I didn't add. How do I remove them (ie. I don't want them to be listed)?Going to Administration | Manage Printers shows me a black button named "Delete Printer", but clicking on it gives me an error message of:
Ok, while I'm here, I'll ask 2 other simpler questions:
(2) anyone have the .ppd file for the Dell M5330dn printer? I've spent 90 minutes on the phone w/ the Dell tech support, and those guys are clueless....
(3) I have 4 printers of the same model. the first is working - is there an easy (command line) way of adding the other printers? Ie. can I just copy the /etc/cups/ppd file 3 times, renaming it to my other printer names (and ip addresses)?
I have a Printer which is attached to Linux System which is fedora 12. I have squid proxy server which is installed on CentOs 5. My squid works perfect. I am using it with wpad.
Now I can access the the cups page using
192.168.x.2:631 without proxy setting
But when I configure my browser with proxy setting 192.168.x.2:631 doesn't open. Due to this users are also not able to print. How to get cups working with squid
I just brought up a new server on RHEL4 to replace an existing older one. The server is using CUPS for printing. I copied the cupsd.conf, printers.conf, and lpoptions files over from the old server. I also copied the printer files in the /etc/cups/ppd directory over to the new server. But I can't get printing to work. And when I run system-config-printer-tui I don't see any of the printers in the dialog box. What other file(s) am I missing?
View 1 Replies View RelatedWhen I try to configure a printer, I get the message "CUPS SERVER ERROR"- The CUPS scheduler is not running-my printer a (LEXMARK all in one X2600)and worked fine since ubuntu 8.04..But now it doesnt work.Lexmark even provide a linux driver.
View 9 Replies View RelatedI get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
Code:
sudo aa-complain cupsd
sudo /etc/init.d/cups restart
[code]....
I just setup a Ubuntu CUPS print server. However when I I try to browse to it, it tells me that I do not have permission to do so and does not let me see the printers or any shared folders.
View 5 Replies View RelatedI am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies View Related