CentOS 5 :: System-config-samba Doesn't Work?
Feb 24, 2010system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
View 1 Replies
ADVERTISEMENT
CentOS 5 :: Get System-config-samba To 'see' Winbind Users And Groups
Jul 14, 2009I have a Samba File Server that can authenticate users in my Windows AD to log into the server. Anyways, I have a good amount of Windows Admins on staff but our org wants to cut budget so our first "slash" as it were is cutting down the actual Windows based File Servers.So my question is, now that I have this test server up and authenticating for logins using Windbind....is there a way I can get system-config-samba to "see" winbind users and groups so that file servers can still be "point and click" for my Windows Admins?
View 3 Replies View RelatedCentOS 5 Server :: Samba Config Doesn't "understand" Smb.conf Lines About "recycle"
May 5, 2011Samba is working fine, and I haven't used the config utility for some months now. but today, in trying to create another share, a warning dialog is displayed about lines that are not "understood". What is wrong and why is this happening now?Here are the lines from the warning dialog
297: recycle:repository = .deletedlou/%U
298: recycle:keeptree = Yes
299: recycle:touch = No
300: recycle:versions = Yes
[code]....
Debian :: GUI App - Installing System Config Samba
May 7, 2013I use this GUI app a lot when I was using Ubuntu. Very simple to use. I want to use it in my new Debian 7 xfce install. My understanding is that I would have to build a deb from source to allow me to use this app? If this is the case, what is the best (easiest) way to do this. I saw some videos in YouTube but I'm not sure if things have changed with the new Debian 7. I have never used Debian before so if possible, go easy on me...
View 3 Replies View RelatedServer :: Samba Config - Can't Get The Public Read-write Dir To Work
Aug 21, 2010I would like to set up three directories-
1) RW public directory
2) R-public, RW-me
3) Private dir (my /home/me)
BTW, I set all file permissions (recursively) to 777 until I can get this to work...
1) So far I have got 1 samba share working Read only with the following: [Music]
[Code]...
Guests can read it okay but user 'JoeBleaux' can't write to it...
2) I can't get the public read-write dir to work, again, it can be read by everyone but no one can write to it. Here's my broken config for this share: [Uploads]
[Code]...
3) I can't get the private dir to work. Here's my broken config for this share: [HomeDir]
[Code]...
Debian Configuration :: System-config-printer No Samba ?
Mar 29, 2011I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
View 2 Replies View RelatedCentOS 5 Server :: Setting Up Relaxed Samba Config
May 29, 2011I've got a situation where I would normally use NFS, but cannot. So in it's place I need to use a samba share (even though it's linux -> linux). I need it completely open and world writeable as if I had done an rw in an NFS export. I thought I had it as when logged in as a user I can edit delete etc. however the apache user seems to be struggling with creating files. Here's my smb.conf as it stands.
[global]
workgroup = WGRP
server string = Samba Server Version %v
security = user
passdb backend = tdbsam
unix extensions = no
[tmp]
comment = Temp Directory
path = /var/tmp
public = yes
guest ok = yes
writeable = yes
browseable = yes
[sites]
comment = Sites Directory
path = /var/www/sites
public = yes
guest ok = no
write list = siteusr
writeable = yes
create mask = 0777
browseable = no
security mask = 0777
directory security mask = 0777
Note that the drive is mapped as user siteusr. What I can do to open it up more?
Debian :: Can Load System-config-samba Package Under Wheezy?
Mar 15, 2015I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).
Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...
Server :: Some Options In System-config-samba Dialog Are Not Working Properly?
Apr 13, 2010I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
Ubuntu Networking :: System-config-samba Crashes - NameError: Global Name 'Error' Is Not Defined
May 27, 2010When I run from the command line, I get this output:
Traceback (most recent call last):
File "/usr/sbin/system-config-samba", line 45, in <module>
mainWindow.MainWindow(debug_flag)
File "/usr/share/system-config-samba/mainWindow.py", line 82, in __init__
[code]....
I have removed and re-installed and get the same crash.
CentOS 5 :: System-config-kickstart Error In CentOS 5.3?
Apr 10, 2009I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
Fedora :: System Display Config Does Not Work?
Jun 17, 2010When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies View RelatedUbuntu :: Postfix / Dovecot Config - Send Mail From Iphone Using An Account On Server Doesn't Work
May 15, 2010the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedUbuntu :: SAMBA Share Doesn't Work?
Mar 16, 2011My SAMBA share doesnt work. i have added valid users, public (not protected by password) shares are working but intended password protected share isnt.
Windows XP says:
Code: "You might not have petrmission to use network resource.
Multiple connections to server or shared resource by the same user, using more than one username are not allowed. disconnect all previous connections to the server or shared resource and try again.." /etc/init.d/smb.conf
Code:
[protected]
path = /home/pass
writable = yes
browseable = yes
security = user
valid users = janis
Fedora Servers :: F13 - HTTPD System Config Tool Does Not Work
Jan 17, 2011Am I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies View RelatedCentOS 5 :: Running System-config-boot In 5.4?
Nov 9, 2009I'm installing CentOS for the first time to run mythtv on (I previously used Fedora, but the new version cycle was too quick). As part of the instructions I'm using, I am told to run system-config-boot (to ensure that centosplus kernel is loaded on boot). The problem is, I cant find this option in my installation of CentOS. Another option I have is to manually edit the grub.conf file, but I'm not sure exactly how I should edit it.
View 2 Replies View RelatedCentOS 5 :: Status Of System-config-netboot?
Jun 29, 2010I am very interested in using CentOS as a server for diskless PXE booting and was wondering if this was a possibility. I have a working DHCP/TFTP/HTTP system set up and going and I can get my client machine to boot a linux image without any problems. Ideally I would like the diskless machines to be able to immediately load an image through PXE and store their own filesystems on the server through the use of NFS.I heard about system-config-netboot and got very excited because it sounded like something that would help me set up a diskless system. However, after doing some research I have heard from many that it is generally buggy and unlikely to work. When I tried using it I got the error: "The diskless directory must be NFS exported and contain a boot sub-directory"Even though my diskless directory WAS nfs exported and most definitely contained a boot sub-directory. Does anyone have any advice on using this tool, or using CentOS as a server for diskless clients?
View 2 Replies View RelatedCentOS 5 Networking :: System-config-authentication Is Not Starting?
Sep 6, 2010I trying to set up a LDAP server using openLDAP / db4. The server runs fine but I cannot get the client to work. Client and server are on the same machine, as for now. The problem seems to be in PAM. However I cannot start the system-config-authentication tool which should do the trick.
Environment
=========
CentOS release 5.4 (Final)
Software
======
authconfig-gtk-5.3.21-6.el5
system-config-securitylevel-tui-1.6.29.1-2.1.el5
system-config-network-tui-1.3.99.18-1.el5
[Code]....
Ubuntu :: Samba Server And Windows 7 - User Doesn't Work?
Feb 7, 2010So here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies View RelatedUbuntu Servers :: Samba Folder Doesn't Work In Vista
Mar 27, 2011I got ubuntu samba server on server 10.04 username:user1 , Home folder: /home/user1 This user connects from a macbook pro no problem. I followed the same steps to set up user2 username:user2 , Home folder: /home/user2 This user does not connect from windows vista. I have the correct ports open, 137-139 & 445, and can connect from the macintosh, but not vista. The error says that the username or password is in correct. If you need some log files or config files, just let me know where to go and they're all yours!
View 9 Replies View RelatedCentOS 5 Server :: Samba Doesn't Create User Profiles On The Fly
Nov 20, 2010I've got Samba server running on CentOS box. Everything works fine when I use "path" parameter, but I think Samba should create /home dirs for clients automatically. It should look like this:
comment = Home Directory of '%u'
valid users = @"Domain Group"
browseable = no
writable = yes
[Code]....
When I explicitly declare "path" param, it works ok. But I need PERSONAL home dir for every user separately, not one dir for everyone.
CentOS 5 Networking :: OpenVPN Doesn't Work On CentOS 5.3 With Windows Client?
Jun 27, 2009This will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
Ubuntu Servers :: Config - Change / Add From The Default OpenSSH Config Files To Get Tunnelling To Work?
Jul 10, 2011I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
CentOS 5 Server :: Samba Option Pwd-must-change-time Does Not Work?
Sep 30, 2010I have installed centos 5.4 with samba 3.0.33-3.15. Now this server is PDC for a domain with 20 xp client. I want to set the "password must change" option in the samba user detail.Now I have this configurationmaximum password age = 68256000maximum password age = 0with pdbedit -Lv pippo
View 1 Replies View RelatedCentOS 5 :: Svn Server Config - Understanding Location Svnpath Parameter On Svn Config
Sep 7, 2009I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
Plymouth :: Doesn't Work In Debootstrapped System
Oct 16, 2010I've created a custom Lucid installation using debootstrap, it works nice but have some problems, one of them is plymouth: it does not show the splash screen, when booting, I can only see a black screen, suddenly a green one and again black, when it is about to boot, some text messages appear and then the system starts. I'm only using X, no window manager, so I edited /etc/init/plymouth.conf and changed the start instruction from:
[code]...
But it remains the same, Plymouth does not show the splash screen.
CentOS 5 :: Yum And Php Doesn't Work After Update To 5.3
Apr 6, 2009I updated centos from 5.2 to 5.3 as recommended:
yum clean all
yum update glibc*
yum update
Update was successful (I didn't see any errors). Then I rebooted pc and found out that my web is extreamly slow. In httpd logs I found: php -> file_get_contents [URL] always dies (timeout error, but somedomain.com is fine, I can telnet it easy on 80) I was wounder if it's update problem and tried yum:
>yum update Loaded plugins: fastestmirror Determining fastest mirrors Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=i386&repo=os error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')> Error: Cannot find a valid baseurl for repo: base
so you doesn't work too... I have no proxies, I tried to reboot pc, I tried: yum clean all
CentOS 5 :: After Update To 5.5 Yum Doesn't Work
Jun 14, 2010after i update my Server to 5.5 i get the following error
[root@Linux /]# yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=x86_64&repo=addons error was
[Errno 14] HTTP Error 407: Proxy Authentication Required
Error: Cannot find a valid baseurl for repo: addons
i export the proxy but still not working,
CentOS 5 :: Guest OS In XEN 5.4 Doesn't Work?
Jul 13, 20101) Installed Cent os 5.4 in my system (name it as "guest os").
2) Downloaded the full kernel source, and patched the vanilla kernel to export symbol table (2 line change) [URL] (Yes I know that kernel should not be touched, if touched you should not seek help here . but I felt I didnt do any big change in kernel there). Besides we unset the config_smp & config_preempt parameter to make the kernel as not SMP and not preemptive .
3) Then compiled and booted with the new kernel 2.6.18, everything went fine . Now my gust os box is loading fine and I dont have any issue .
So now I need to install this above machine as guest OS in one more XEN machine cent os 5.4 (name it as "xen os").
So we created the image out of the above box "guest os" and added it as VM in xen os . But while booting it always hangs under some error like "/usb device sort of thing" (I dont have the screen where it hangs, but I do have the equivalent xen log from XEN OS linked to [URL] .
1) what the error is, and what need to be changed in my guest os build .
2) In general I am new to this VM and XEN installation, to be frank I am completely zero . Does changing the native os 5.4 to guest os need any change in kernel or something.
3) Does this case possible, install plain cent os in xen machine. After then patch the kernel in VM and boot with that . I guess it should not be possible ...
4) If possible guide me to some documentation where I can learn few basics over this.
Ubuntu :: System That Has University Assignment Doesn't Work
Mar 21, 2011I'm currently in distress because my Ubuntu system that has my university assignment doesn't work. Not only that, when I tried to fix it I managed corrupt the dual boot I had and now cannot login into either Windows 7 or Ubuntu (besides the USB tryout version which I'm currently on now.I'll try and describe what happened in the beginning. I was rushing to get to class so I needed to shut down my Ubuntu system quickly. The quickest way was to obviously hold down the off button however later when I got home to finish off my uni assignment I couldn't boot into linux! I just get a dos command line with the word grub on it.However not only did it not fix my problem I now can't boot into anything except from this Ubuntu Live CD.
View 6 Replies View Related