Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I'm running a server with two sites which both need to be able to send emails. Currently I have Postfix set up to send email via Google Apps. This works fine, but Google's servers ignore the From: address I specify and substitute the one I logged in with. Is there a way to make Postfix log into Google Apps with a different username based on what site the email is coming from? The server does not recieve any mail itself; Google recieves it and we have it set to forward it to the appropriate person's real email address. I'm only worried about sending mail.
(Postfix is not a requirement here, so if there's another mailer that can do this better, I'm open to ideas. However, sending email directly from the server isn't an option as it's a residential IP address and blocked by most of the big email providers.)
I would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
I've set up an postfix+courier imap+mysql server.is it possible to 'move' mailfiles over to the imap store? I have another mail address at my isp provider. And I would like to get rid of my pop mail storing mails locally in my mail client (which is windows; ms outlook). My ISP doesn't support imap, and I would like to store all my mail on one server, which is located in a good server envirmonment. Plus it's nice to have access to all mail from a web interface when it's vacation/travel time. I was thinking something like having a pop client cheking for mail every couple of minutes on the server, some suedo code follows:
Crontab on local server: 0,5,10,15,20..55 * * * * /usr/sbin/checkmail 2,7,12,17,22..57 * * * * /usr/sbin/mv_mail
checkmail:
Checks and downloads popmail from external server
mv_mail:
moves mail from e.x /var/spool/mail/pop/user/cur/* to /var/spool/mail/imap/user/cur/*
Will this kind of setup be possible? is Maildir style popmail compatible with Maildir style imap?
Let me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25 ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
I'm having a problem with a new install of postfix... it won't relay mail to external domains. Internal mail is fine.I'm using virtual_mailbox_domains so that I can have multiple domains, and I've set dovecot to use local files with encrypted passwords.Here's my main.cf
who manage Postfix servers, what do you recommend is the best way to refuse all incoming and outgoing mail to specific domains? I want a blacklist of domains such as:
- AOL - Yahoo - MSN - Hotmail - Gmail
Is there a proper way I can tell Postfix to please deny sending and receiving SMTP traffic to and from those specific domains I specify? I see no need in my corp. mail server has to communicate in any way to those. I allow access to all those accounts via port 80/443 so they can just login to the web and send non business related junk this way.
I have a postfix mail server up and running. I've added more than one domains to recive mail by adding them to the :/etc/postfix/virtual and poiting to a UNIX user account. That works fine. But when users send out mails (From squirrelmail) all users send from the same domain. How do I add a $myorgin to a virtual domain?
I am setting up a Postfix MTA that will be only sending mail for 10 different domains. We have other servers that will be receiving the mail for the domains so I only need to set up for sending on Postfix.
What my issue is I am trying to configure Postfix so that when it sends mail the header shows what domain the mail came from and not the domain the Postfix server is set to. For example....
[URL]
When I send mail from domain2.com I want it to show in the header it was sent from domain2.com and not from domain1.com. What do I need to set in postfix so that this happens? Right now no matter what domain the mail is from the header always shows the server domain and I can't have that.
I am running a spam filter on debian lenny 5.1 with postfix, amavis-new, spamassassin, and clamav. It works pretty well but I would like to finish tweaking it to minimize the mail getting quarantined. It really isn't quarantining anything that isn't spam, except for an occasional list mailer. However, the quarantine is huge, and takes a while to go through. I noticed that much of the spam is coming from foreign country tld's like .cz is there anyway to have postfix run a check on the header and if the email, or smtp origination is from a server from a foreign tld have it just rejected. I can whitelist anything if need be in the future but as of now we don't do any business overseas and don't need to worry about blocking legit email.
I think this should be possible, however, I am unsure of the syntax for the file, where to put it and if wildcards are possible in domain blocking like
I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
so the emails no matter which domain receives the email trscookie always will receive the email.
However I am unable to work out how to 'reverse' this process, for example.
If i was to go to secondserver.com/webmail I would like the emails to get sent from trscookie@secondserver.com however they are currently all coming from serverone.com. Is it possible to configure this so that it is sent from the correct domain?
so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
I have setup Postfix + Dovecot on my basic debian 5 server. If I send a message to a localuser@mydomain.com from mutt, it delivers just fine and is visible when viewed through squirrelmail, I can also send just fine.
My issue is that irrespective of what options I set in main.cf, I cannot for the life of me get Postfix to stop erroring with "Recipient address rejected: User unknown in virtual alias table". I'm stumped.
My main.cf is as follows code...
I do not want to setup virtual hosting with MySQL or similar, I literally want to receive mail in local users mailboxes for a single domain. Any ideas on what's missing?
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
We have a application hosted in our server and it uses send mail for sending and receiving mails.mails can able to reach certain ids but it cant reach some ids. this is the log entry.
I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
I am running cyrus 2.1 on OpenSusu 11.0. A couple of days ago I tried to install ispCP and it ending up trash my email. I restored everything in /etc/postfix where ispCP had changed a load of files, but unfortunately that did not correct all of my problems. I have several domains with multiple users, most of which deliver to a few local address.
joe@domain1 delivers to joe admin@domain1 delivers to joe fred@domain2 delivers to fred admin@domain2 delivers to fred
all of the email intended for local user is delivered to a single user (e.g. larry).Email that is redirected to an external user (e.g. mike@linuxquestions.org) works fine. Email to non-existent users fails, as expect. I tried deleting the mail box for one of the users and re-creating it, but the problem continues. I have looked through many HOWTOs, web pages and man-pages, but I cannot find any configuration options that addresses this kind of thing.
I am going to try and replace our crappy Windows/imail server with a new ubuntu 10.04 LTS based machine. It will end up with about 400 domains on it with around 3000 users total. 96% of the domains have very light use. 4% of the domains have heavy use but do not send any bulk mail.
Can someone here recommend a mail server software package that would be easy to administrate and easy to backup/replicate? All we need is POP with webmail. We do not need IMAP or want any group/collaborative functions.
What do you usually use for anti-spam on a linux mail server? We want to keep it all open source if possible.
For hardware we are looking at an HP DL360 G5 with dual Xeons, 4G of ram, and the P400 controller with 6 SAS 15k drives. Do you think a server like this will be able to handle the mail on linux? Volume is around 400k messages a day inbound with about 10% being legit/90% being spam. The server will be dedicated to mail hosting and will not host websites.
set no bouncemail set postmaster postmaster@dot.com.gh set logfile /var/log/fetchmail poll pop.teledataict.com protocol pop3 localdomains dot.com.gh archive dot.com.gh no dns
envelope X-Envelope-To: qvirtual dot.com.gh user "maildot3@teledataict.com" there pass "mail" is * here forcecr nokeep flush dropdelivered fetchall
This works perfectly as I want. But right now, what I want is, I want fetchmail to download mails for more than one or several accounts in different domains and different pop servers. How can I improve this rc file to accomplish my task?
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
Im moving all my websites on a dedicated box. I had a cpanel hosting account, and now moving to a terminal and ssh system.I need some advice on choosing my mail setup. I need POP, SMTP, with multiple domains, as host for a few clients.I would like the most simple version.The server will only send +- 100 mails / day.I currently running Ubuntu Linux 10.04.
I have recently setup an Ubuntu 10.04 Minimal x64 Server. I plan on setting it up as a mail server. I need a secure server, that has spam prevention on it. Im setting up around 50 domains and would like a web based control panel. What is the most secure mail server, that i can setup for multiple domains?
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
I have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).
