Server :: Nameresolution Timeout After Longer Samba Runtime
Nov 3, 2010
We are running several server with SLES10SP3 and samba. After the service is running for a while we are getting timeouts for 15-20 seconds during a ping on the fqdn before he can resolv the name, same happens with traceroute and ssh. ping on a ip is successfull at once and nslookup is not showing any errors.
After a restart of the smb, nmb and winbind services the nameresolution is functioning normally again.
I honestly dont know where to start looking, this is a virtualized system and i checked the hypervisor (vsphere) logs but those turned out clean.
View 2 Replies
ADVERTISEMENT
Sep 2, 2010
I am using samba 3.0 on rhel-4, it works fine i am getting the share folder in linux and windows xp as well with username and password for first time only then for next time it will not ask me the username and password for samba user. Actually i want to fix idle-timeout and password authentication for user every time the user want to access the samba share folder.
View 2 Replies
View Related
Aug 26, 2010
I use OpenSuse 11.3 and I successfully built a samba/openldap server. However the raoming profiles were not working so I removed the roaming profile part of the samba and the openldap using ldap account manager. I also rejoined a couple of the computers back to the domain successfully (it was not an instaneous join, it took a good minute or 2 to join each pc). Now I cannot cannot login to any of these computers with the domain credentials. I can share using the UNC path no problem and this was working find about 1 week ago.
On 1 of the computers Iw as able to finally get a log file saying this:
View 2 Replies
View Related
Sep 11, 2010
Samba doesn't seem to disconnect on shutdown except by timing out, causing a loooong Lucid shutdown. (I can disconnect manually before shutdown by unmounting the Samba shares, and shutdown is then very fast.) Apparently Network Manager is somehow involved. I've installed a NM shutdown Samba script which works for the first user account, but not for the second user account (which was created and then put into the admin group).
View 4 Replies
View Related
Oct 15, 2010
I am trying to install the Matlab 7.5 compiled runtime for 64-bit Linux (MCRInstaller.75.glnxa64.bin) and keep getting a "No Java Runtime Environment(JRE) was found on this system." error message.
I understand the JRE is bundled with MCRInstaller and will self-compile/install. However, I don't have admin access, could this be the source of the problem? If so, how could I fix it (not sure how to direct it to install locally without going into the source code)?
I got around this error before, but stupid me didn't write down what I did and I forgot.
View 3 Replies
View Related
Aug 4, 2011
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies
View Related
Feb 16, 2011
After installing Fedora 14 and being satisfied with the behaviour and the packages installed for it, i want to replicate the same installation in a few more PCs, so i installed Revisor to make with it an iso file that reflects my actual installation.
The problem is that if i run the software from Applications->System tools->Revisor, nothing happens after giving the user password.
Then i run it from a consele and this error is produced after giving my password: "Cannot find anaconda-runtime in /usr/lib/anaconda-runtime"
But anaconda is the environment used for installation, so it is installed from the very begining. Why this happens?
View 1 Replies
View Related
Jun 17, 2010
I having problems detecting my network:
Code:
I'm starting to think that samba is comprised of buggy applications and i'm basically hitting my head against a brick wall for the fun of it. Can anybody vouch for its reliability under fedora 13?
View 3 Replies
View Related
Apr 13, 2010
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies
View Related
Mar 22, 2010
I use Ubuntu 9.10 on my laptop and Vista Premium on my two desktops. Until recently I was able to view and access my document files on my desktop from within Ubuntu. I can no longer do so.
View 2 Replies
View Related
Jun 1, 2011
I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").
Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?
View 1 Replies
View Related
Jan 15, 2011
I've recently been experiencing an issue connecting to my Samba shares on a Ubuntu 10.4 server box on my network from a Windows 7 client. If I use Ubuntu 10.10 on the same machine, or a Windows XP Virtual Machine running under both Windows and Linux host the share works absolutely fine.
What happens is if I browse to the hostname or the IP address I see a login prompt (there is access control) but my username and password no longer work. Before I didn't need to login as they are the same as my windows credentials.
I'm not sure what information/logs etc would be most relevant so I've posted some information, if any more is required then let me know where to find it and I'm sure I'll be able to get it.
Here is the last few days of the log when I believe it was working, there are no entries since.
Code:
View 8 Replies
View Related
Feb 8, 2010
I need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
View 1 Replies
View Related
May 12, 2009
New fun from M$, we have started to test Win-7 on a few machines, and while it worked flawlessly in XP, Vista and Win-7 beta, logging on to the share (AD) from a Win-7 RC doesn't work.
View 1 Replies
View Related
Jun 17, 2009
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
View 14 Replies
View Related
Mar 3, 2010
I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba
Code:
[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)
[code]...
All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.
View 2 Replies
View Related
Aug 20, 2010
Ever since my upgrade to 10.04 I no longer have Samba shares to my WinXP system(s).I have searched the forums high and low and for the life of me cant figure out what I am doing wrong.I am not able to see my XP system from Ubuntu, nor see my Ubuntu system from XP.Attached here is a copy of my smb.conf.
View 9 Replies
View Related
May 1, 2011
I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:
I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?
View 3 Replies
View Related
Jul 4, 2011
I am on CENTOS 5.4 64 Bit Servers.
I have created a script which runs some commands on remote servers.
I am stucked when a server is not responding timely.
I want to set a timeout say after 10 seconds, if I am unable to login (for whatever reason) I should be dropped back at the shell.
I tried using LoginGraceTime but it is not working for me as below:
Code:
LoginGraceTime 10s
or
LoginGraceTime 10
View 14 Replies
View Related
Apr 23, 2011
My KNode gets a 'timeout on server' when loading newsgroups. I've read that you should tweak the server timeout (settings -> configure knode -> accounts newsgroupserver -> edit -> server timeout). However, when I try this out the properties window of my news server has no 'server timeout'. What can I do now?
(KNode version 4.4.8, KDE version 4.4.5)
View 2 Replies
View Related
Jun 8, 2011
One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
View 7 Replies
View Related
Jan 30, 2011
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies
View Related
Dec 7, 2010
I have two HP Quard core high end server.
OS : Red Hat Enterprise Linux Server release 5.2 (Tikanga)
Kernel : kernel-2.6.18-92.el5
From last couple of days I found entry in dmesg:
###########################################
Oct 11 15:03:46 kernel: schedule_timeout: wrong timeout value ffefda64 from c05a784e
Oct 11 15:03:46 last message repeated 2 times
[code]...
View 4 Replies
View Related
Mar 29, 2010
I have an RHEL 4 server now running 2.6.9-89.0.18. After installing the kernel and rebooting to make this the current kernel, the grub menu to choose the kernel failed to offer a countdown and did not choose the kernel as it should have. I had to manually select the kernel.I inspected the grub.conf file and could not find any clue as to why it didn't work. The timeout directive is there, and the syntax matches other systems we have with the same kernel and OS.Can anyone provide any insight as to what else (other than a typo on the conf file) would cause this?The only difference between the way the kernel update (and the subsequent changes to the grub conf file) took place was a manual install of the RPM on the affected system, versus pulling it down from RHN using up2date.
View 11 Replies
View Related
Feb 21, 2011
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies
View Related
Jan 21, 2010
I am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies
View Related
Sep 12, 2010
I'm running sendmail 8.14 which sends out thousands of email. I'm getting several timeout error on only a few particular hosts. What I found is almost all of them are Exim 4.69
maillog shows
--> timeout waiting for input from ..@xxx during client greeting
after several tries, I finally got bounce back with
--> 451 4.4.1 reply: read error from xxx.com.
.. Deferred: Connection timed out with xxx.com.
Message could not be delivered for X day
Message will be deleted from queue
When i search though maillog with all of those error and they all seems to be running Exim and they are different mail domains.
View 1 Replies
View Related
Jun 3, 2011
[URL]
We have the same problem but tried his solution to no avail.
Doing a shh would give me an error..
Quote:
usr/bin/xauth: timeout in locking authority file /var/www/html/felipe/.XauthorityServer sent command exit status 1
When I change SElinux to permissive from enforcing I can login but turning back to enforcing, the problem comes back. I did the following...
Quote:
[felipe@nimitz ~]$ ls -Z .Xauthority
-rw-------. felipe felipe unconfined_ubject_r:httpd_sys_content_t:s0 .Xauthority
[felipe@nimitz ~]$ ls -lZd
drwxr-xr-x. felipe apache system_ubject_r:httpd_sys_content_t:s0 .
[felipe@nimitz ~]$ ps -eZ|grep sshd
[code]....
I tried to create a new user with the default directory in /home and it work fine.
View 1 Replies
View Related
Jan 21, 2011
I'm attempting to install Webmin in Endian I download the tar.gz file and ran setup.sh and it says it is installed, however it doesn't let me go to the webpage it says. I get a timeout error. I'm using the current version of endian and webmin.
View 4 Replies
View Related
Oct 8, 2009
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
View 3 Replies
View Related
