Fedora :: VNC Server - Get Timeout Or Connection Refused
Jan 30, 2011
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies
ADVERTISEMENT
Jan 21, 2010
I am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies
View Related
Feb 18, 2011
I am experiencing a bit of a problem with openssh-server. I installed the server like I normally do. It wouldn't work, so I tried using this. It still didn't work. Later, I have realised that when using service sshd start SSH says it started, but when you check if it's running with service sshd status it says it doesn'triend advised me to use /etc/init.d/sshd and I managed to get it started. However, that doesn't return anything, and when I try to connect it says connection refused even when I try to connect from localhost to localhost
View 13 Replies
View Related
Dec 20, 2009
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
View 4 Replies
View Related
Apr 28, 2010
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies
View Related
Feb 19, 2010
i administer an isp mail server on centOS my client has a mail server on redhat, the client can send mail successfully but if i try to send mail from outside i get "connection refused error" from my /var/log/maillog can anyone help this has been pending for long and im under fire!!
View 1 Replies
View Related
Sep 2, 2010
I am using samba 3.0 on rhel-4, it works fine i am getting the share folder in linux and windows xp as well with username and password for first time only then for next time it will not ask me the username and password for samba user. Actually i want to fix idle-timeout and password authentication for user every time the user want to access the samba share folder.
View 2 Replies
View Related
Jan 7, 2011
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
View 2 Replies
View Related
Aug 17, 2011
I am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
View 4 Replies
View Related
May 24, 2011
ERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies
View Related
Feb 7, 2011
at the computer shop we have an ubuntu 9.10 server that we log into via ssh or webmin today i was trying to ssh into the machine and got connection refused, so i logged into webmin and found the ssh server not running when i tried to start with webmin it i got the error
Code: failed to start ssh server * /dev/null not a character device went over to the shell command part of webmin and issued ls /dev -l and looked at the output and found something of concern
[Code]....
View 2 Replies
View Related
Aug 1, 2011
I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.
Port 22
PermitRootLogin no
1.override default of no subsystems[code].....
View 5 Replies
View Related
Feb 21, 2011
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies
View Related
Feb 9, 2010
I am using redhat on server and open suse on client. When I want to ssh from my server machine the following error occur "connection refuse". I execute the following command on clien machine "/etc/init.d/sshd start". It shows the following error just after command execution "sshd re-exec requires execution with an absolute path".
View 1 Replies
View Related
Aug 7, 2010
I have just built a new postifx open relay server to allow my ISP clients to send emails. During testing of the SMPT protocol, I can managed to send emails to my localhost however, I can't send emails to other external mail server. Below is a test to a yahoo account. Aug 7 15:03:55 mx2 postfix/smtp[4050]: connect to g.mx.mail.yahoo.com[98.137.54.238]: Connection refused (port 25) Aug 7 15:03:55 mx2 postfix/smtp[4050]: F084EC8D76: to=<ellyu4@yahoo.com>, relay=none, delay=8.5, delays=1.2/0.05/7.3/0, dsn=4.4.1, status=deferred (connect to g.mx.mail.yahoo.com[98.137.54.238]: Connection refused)
[Code]....
View 16 Replies
View Related
Feb 15, 2010
I am using localhost for only send the email, its send mail outside domain like my gmail or yahoo accunt. but its not send my domain user account. the error comes when i see the logs is: stat=Deferred: Connection refused by [127.0.0.1]
View 3 Replies
View Related
Aug 24, 2010
I am facing connection refused error 111 in TCP client server program, in android native code which in C , but if code is in JAVA it works fine, but i want to continue in C only, in manifest file i have given permission and ip, port is correct .What am doing wrong?? or is their any network setting?? am using UBUNTU 10.04and If both client server Linux pc it works fine. only if android emulator becomes client then am getting connection refused
View 1 Replies
View Related
Mar 13, 2011
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error: Code: Connection Refused What should I do?
View 1 Replies
View Related
May 4, 2010
I have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
View 3 Replies
View Related
Mar 16, 2010
When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
View 13 Replies
View Related
Apr 27, 2009
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
View 15 Replies
View Related
Oct 23, 2010
I wrote a simple client server socket program in C.
View 1 Replies
View Related
Jan 5, 2010
I've configured the RADIUS to use a PostgreSQL DB for accounting. Everything works fine if the connection from the RAD to the SQL is OK. If the PostgreSQL service dead, the RAD will skip the failed connection and continue to work. That's OK, too. But if I shutdown the network interface of the SQL (simulating a connection lost - timeout problem), the RAD thread which processes accounting request will be hung up, remains as active and unresponsive forever. So the RAD will not return anything to accounting client (my NAS).
As more accounting requests come, spare threads for processing the requests will reduce and be used up eventually. I've debugged for a while and found it's the problem of PQexec() function. The function blocks the thread eternally till if the connection lost. I know the RAD version is a little outdated, but I cannot replace it right now. I wonder if there's a way to make the RAD reply to the NAS even when the connection between the RAD and the SQL lost.
View 1 Replies
View Related
Mar 2, 2010
I'm try to setup a database server using mysql, the server starts fine, and I can access it using the built in mysql client via console (adding databases and tables works fine), but the problem is... I always get a connection refused error whenever I access the database outside the built in mysql client (example, if I write a code that connects to mysql). So, I tried execute an nmap command and the only ports open are these ports:
[Code]....
there's no 3306 for mysql... I'm thinking that the firewall is just blocking the port that mysql is using, but my question is, how could the built in client connect to the server if there's no open port for mysql server? Don't clients usually access a servers through ports?
View 4 Replies
View Related
Jul 14, 2011
i done desktop config in ubuntu server 11.04 and connected via tightvnc,uvnc and in remote desktop viewer from another ubuntu machine also. I am not able to access(connect) the server in GUI mode(when monitor is removed) but i putty is working fine in cmd line.
View 1 Replies
View Related
Aug 1, 2011
I have 2 servers..
let say server A and server B
On server A open ssh is configured and is running on port 2298. So from my machine I can login there using ssh on port 2298
But when I login to server B and from there I try to connect to server A I cannot.
ssh: connect to host <ipaddress here> port 2298: Connection refused
View 2 Replies
View Related
Mar 31, 2010
I am trying to install the cvs server for the first time on centos , the sercive xinetd seems to start. but when i try to connect to the server using this command cvs -t -d server
It prompts for the password once i enter the password it gives me the error - cvs: Connection refused
Secondly if i telnet to the port 2401 it gives Trying 10.... telnet: Unable to connect to remote host: Connection refused
I checked the if the port is up by netstat-tulpn /netstat -na didnt show me the port 2401
View 2 Replies
View Related
May 23, 2011
I am trying to monitorize an OpenWRT (Backfire 10.03, r23115) router from an Ubuntu server, but I am having some problems. I have installed Nrpe (2.12) on the remote host (OpenWRT), I have executed the program as a deamon (/usr/sbin/nrpe -d) but when I start the NRPE deamon, I don't get anything about NRPE executing netstat -at or ps -ef.I would need to install check_nrpe on OpenWRT to find out if NRPE is working, but I can't find any ipk package with it. Now, once in the monitoring host when I try to reach the remote host from the server:
/usr/local/nagios/libexec/check_nrpe -H ip_remote_host
I get: Connection refused by host
Even, trying with localhost:
/usr/local/nagios/libexec/check_nrpe -H localhost
I get the same error: Connection refused by host
I have installed Nagios Plugins and the check_nrpe plugin. I have edited the /etc/nrpe.cfg file:
allowed_hosts=127.0.0.1 ip_server
I don't exactly know if it is remote host's fault, monitoring host's fault or both.
View 14 Replies
View Related
Feb 22, 2011
I have a machine running with slackware64 13.1 and vnc servers is installed on it. It worked for months until yesterday, when I couldnt connect to the machine remotely.
I have 2 vnc "users" on this machine, root and "user". Each have their own desktop. Root has desktop :1 and user had desktop :2. Simple enough.
VNC servers is started via /etc/rc.d/rc.local with the command:
Code:
Code:
It worked flawlessly. I use the very same configuration on my home server, never had a glitch.
From the "distant" machine, I get this error when I try to connect:
Code:
Unable to connect to VNC server
What has changed so it no longer works? I assume its not a network problem since the machines are all located in my home network and there is no firewall or router in between them.
View 2 Replies
View Related
Sep 7, 2009
i need to set a cluster of two nodes for lamboot, i am using fedora 7
1. passwordles ssh is set.
2. a folder in the home directory is nfs mounted, both on server( 10.1.7.136 ip of the server)and client(ip of the client 10.1.7.129). lam
3. lam 7.1.1. is installed on the system.
4. a file named lamhosts is created containg the ip's of server and client respetively
[lamuser@localhost lam]$ cat lamhost
10.1.7.136
10.1.7.129
lamboot is working on indvidual system but on
[Code].....
View 1 Replies
View Related
