I am using samba 3.0 on rhel-4, it works fine i am getting the share folder in linux and windows xp as well with username and password for first time only then for next time it will not ask me the username and password for samba user. Actually i want to fix idle-timeout and password authentication for user every time the user want to access the samba share folder.
View 2 RepliesWe are running several server with SLES10SP3 and samba. After the service is running for a while we are getting timeouts for 15-20 seconds during a ping on the fqdn before he can resolv the name, same happens with traceroute and ssh. ping on a ip is successfull at once and nslookup is not showing any errors.
After a restart of the smb, nmb and winbind services the nameresolution is functioning normally again.
I honestly dont know where to start looking, this is a virtualized system and i checked the hypervisor (vsphere) logs but those turned out clean.
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies View Relatedtype the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies View RelatedI am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies View RelatedI've configured the RADIUS to use a PostgreSQL DB for accounting. Everything works fine if the connection from the RAD to the SQL is OK. If the PostgreSQL service dead, the RAD will skip the failed connection and continue to work. That's OK, too. But if I shutdown the network interface of the SQL (simulating a connection lost - timeout problem), the RAD thread which processes accounting request will be hung up, remains as active and unresponsive forever. So the RAD will not return anything to accounting client (my NAS).
As more accounting requests come, spare threads for processing the requests will reduce and be used up eventually. I've debugged for a while and found it's the problem of PQexec() function. The function blocks the thread eternally till if the connection lost. I know the RAD version is a little outdated, but I cannot replace it right now. I wonder if there's a way to make the RAD reply to the NAS even when the connection between the RAD and the SQL lost.
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
In order to get my shares working I first have to connect to the windows shares from the Ubuntu machine. Then I can connect to the Samba shares from the windows machine. If I don't continue to use the shares. It'll drop the connection and I have to unmount the windows shares and start the process over. The wireless network still shows as being connected but I get an error on the windows machine if I try to connect. I've Googled this and it appears to be a Windows problem. I know this is a ubuntu forum but thought I'd ask for any info. I believe that this is also what is giving me shared printer issues as well.
View 2 Replies View RelatedSamba doesn't seem to disconnect on shutdown except by timing out, causing a loooong Lucid shutdown. (I can disconnect manually before shutdown by unmounting the Samba shares, and shutdown is then very fast.) Apparently Network Manager is somehow involved. I've installed a NM shutdown Samba script which works for the first user account, but not for the second user account (which was created and then put into the admin group).
View 4 Replies View RelatedI have a Samba server conecting to a windows XP machine that is in workgroup named CLOUDLESS. I have a share folder that resides in the server that can be accessed no problem by the XP client, but I got the following error message from the syslog:
Code:
Apr 5 18:15:44 firefly nmbd[5656]: find_domain_master_name_query_fail:
Apr 5 18:15:44 firefly nmbd[5656]: Unable to find the Domain Master Browser name CLOUDLESS<1b> for the workgroup CLOUDLESS.
Apr 5 18:15:44 firefly nmbd[5656]: Unable to sync browse lists in this workgroup.
[Code]....
I am running debian 8 stable version (which I starting to think not that "Stable") and when i surf web pages its ok except the fact that I am too often get connection timeouts then i need to press "enter" in the ur box to try again and then its maybe work if not I am going to press another "enter" on the url box until i have connection to the site its important to say its not a isp or hardware problem. I run the web with no problems in that other operating system which I am not getting back to.....
View 14 Replies View RelatedI am trying to set up an ssh server on my Debian squeeze box so that I can access it remotely when I'm not at home. I connect to the internet through an at&t 2wire modem/router. First off, I *can* ssh into the machine from inside the local network, e.g.
[Code]...
Nmap done: 1 IP address (1 host up) scanned in 2.12 seconds Playing around with Nmap, I also found that it only sees port 50001 as open.
I'm setting up a htpc system (Zotac IONITX-F based) based upon a minimal install of ubuntu 9.10, with no GUI other than xbmc. It's connected to my router (d-link dir-615) over a wifi connection configured for static IP (ath9k driver), with the following /etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
# The primary network interface
#auto eth0
[code]....
Network is fine, samba share to the media direction works, until I try to upload a large file to it from my desktop system. Then it downloads a couple of percents at a really nice speed, but then it stalls and the box becomes unpingable (Destination Host Unreachable), even after canceling the transfer, requiring a restart of the network.
Same thing when I scp the file from my desktop system to the htpc, same thing when I ssh into the htpc, and scp the file from there. Occasionally (rarely) the file does pass through, but most of the time the problem repeats itself. Transfer of small text files causes no problems, and the same goes for the fanart downloads done by xbmc. I tried the solution proposed in this thread, and set mtu to 800 in the interfaces file, but the problem persists.
Something is wrong with the networking on this Ubuntu system. It has been assigned the LAN ip address 10.1.10.10 From another Ubuntu desktop, I can: ssh myself@10.1.10.10 ( from 10.1.10.143 ) and I can login without any problems. I can ping 10.1.10.10 ( from 10.1.10.143 )
[code]...
I have a user using Mac OSX and ssh-ing to a couple of Redhat servers, one running RHEL5 and the other RHEL6. The user's connection seems to be timing out after 60 minutes or so of inactivity. The user is on the same subnet as the servers. Both servers have the same sshd_config files with the following entries with regards to timeout:
TCPKeepAlive yes
ClientAliveInterval 30
ClientAliveCountMax 99999
In a nutshell, his office Mac keeps getting dropped off both machines. Other machines, including the Mac he logs in with from home doesn't get timed out and keep the connection open. The log files are unremarkable and the switch port shows no errors
nm-applet timeout. I connect to the internet via wifi access. I have this problem that whenever there is a powercut, my wifi router switches off and then nm-applet tries to connect and then after sometime times out i.e. nm-applet gives up on trying to restore the connection.
I want nm-applet to keep trying to restore the connection indefinitely because if the electricity is back lets say after an hour then it should immediately connect without manual intervention.
I did google around trying to search for the configuration parameters but was not able to do so.
I'm using Kubuntu 9.10, my pppd version is 2.4.5 and pptp is 1.7.2 I'm trying to connect to the iPredator VPN service, but I keep running into problems with LCP. I've tried using knetworkmanager, nm-applet, kvpnc and plain old text-based configuration to no avail. Here's a snippet of pppd's output:
[Code].....
(I've got "defaultroute" in my /etc/ppp/peers/ipred config file.) Any ideas what could be causing this? Could it even be my router? It claims to support PPTP, but considering it claims a lot of other things which aren't true, I wouldn't be surprised if it was the culprit.
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
I have a windows 7 box and a debian 5.0 box connected to a linksys wrt300n router. I can access the linux box from windows 7 through ssh. I used to be able to access the linux box from outside the LAN, but when I was messing with the ssh port configuration (at least I think this was what happened), i lost my ability to connect. I tried writing a new sshd_config file so that it is much simpler:
Protocol 2
PasswordAuthentication no
UsePAM yes
I tried directly connecting the linux box to the internet to rule out a router firewall issue that i was missing. iptables -L yields nothing, as I have since rebooted the machine since messing with iptables rules. But still, when I try to ssh in from outside the LAN, I get a connection timeout error after a 10-15 second hang.
A few weeks ago, I upgraded one of our machines to the 64-bit server edition of 10.04. All went reasonably well (after some hoops to get it to properly recognize/mount the RAID + LVM partitions), but one of the things that confounded the installation process was login timeouts. From doing some research, I thought I'd gotten it solved by removing the checks for updated packages on login, but I either didn't get it done, or there's something else going on here.The issue is that the machine is headless and is actually a file & application server, but I do need to connect to it via ssh on a regular basis. However, the issue isn't related to SSH, as it also happens when I try and log in through the physical console too.
What happens is that every so often, login attempts will time out for a period of minutes, then they will suddenly start working again, instantly giving me my expected shell. Again, I suspect it is something with the way the motd junk is being generated, but having a server that prevents you from logging in is totally unacceptable. I've no idea how to go about debugging what happens because I don't see anything useful in any of the logs, and I don't have a way to trace the login process from outside. I'd love to hear what the problem actually is and how to prevent this from happening.
when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 10 Replies View RelatedI have a Debian VPS running Lenny and I'm trying to setup a way to run remote desktop sessions from it. I went with FreeNX, NX client for windows from nomachine, XDM and xfce4. All seems to have installed well, but I can't start an NX session on my box. I can connect to the server and authenticate, but the client hangs on "Downloading the session information," eventually timing out. The log output is below - I'm not even seeing an error message. Any ideas?
[Code]...
The only thing I noticed during install, which was about 400 packages since this was a barebones VPS, was that I should consider recompiling the kernel with CONFIG_SOFTWARE_SUSPEND=y. I don't know if this has any impact on session information, however, since this is a new session, not one I'm trying to resume.
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedI need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
View 1 Replies View RelatedI am on CENTOS 5.4 64 Bit Servers.
I have created a script which runs some commands on remote servers.
I am stucked when a server is not responding timely.
I want to set a timeout say after 10 seconds, if I am unable to login (for whatever reason) I should be dropped back at the shell.
I tried using LoginGraceTime but it is not working for me as below:
Code:
LoginGraceTime 10s
or
LoginGraceTime 10
My KNode gets a 'timeout on server' when loading newsgroups. I've read that you should tweak the server timeout (settings -> configure knode -> accounts newsgroupserver -> edit -> server timeout). However, when I try this out the properties window of my news server has no 'server timeout'. What can I do now?
(KNode version 4.4.8, KDE version 4.4.5)
One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
I have two HP Quard core high end server.
OS : Red Hat Enterprise Linux Server release 5.2 (Tikanga)
Kernel : kernel-2.6.18-92.el5
From last couple of days I found entry in dmesg:
###########################################
Oct 11 15:03:46 kernel: schedule_timeout: wrong timeout value ffefda64 from c05a784e
Oct 11 15:03:46 last message repeated 2 times
[code]...
I have an RHEL 4 server now running 2.6.9-89.0.18. After installing the kernel and rebooting to make this the current kernel, the grub menu to choose the kernel failed to offer a countdown and did not choose the kernel as it should have. I had to manually select the kernel.I inspected the grub.conf file and could not find any clue as to why it didn't work. The timeout directive is there, and the syntax matches other systems we have with the same kernel and OS.Can anyone provide any insight as to what else (other than a typo on the conf file) would cause this?The only difference between the way the kernel update (and the subsequent changes to the grub conf file) took place was a manual install of the RPM on the affected system, versus pulling it down from RHN using up2date.
View 11 Replies View RelatedLinux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf