I'm attempting to install Webmin in Endian I download the tar.gz file and ran setup.sh and it says it is installed, however it doesn't let me go to the webpage it says. I get a timeout error. I'm using the current version of endian and webmin.
View 4 RepliesCurrently we have migrated data from Unix linux. The data in Unix is in Big endian byte structure. Where are as Linux (suse linux) byte structure us little endian. This byte order mismatch is creating problem when data is read again in microfocus cobol.
Is there any way to set byte order in Linux is big endian?
Is there any utility to convert data in big endian byte structure to little endian byte order.
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
I encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
I installed webmin on Debian apt-get install webmin. After installation following message came.
Code:
Setting up webmin (1.510-2) ...
Webmin install complete. You can now login to https://IP:10000/
as root with your root password, or as any user who can use sudo to run commands as root. So I infer that the installation was successful.
But when I do
Code:
http://IP:10000
I get following error
Code:
Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error.
I have installed webmin. I am configuring ldap server using webmin gui. when i try to add user by ldap user and group I get following error. Failed to save user; Failed to add user to ldap database; modification required authentication. I am new in ldap configuration and hope for best reply.
View 1 Replies View Relatedtype the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies View RelatedI'm running sendmail 8.14 which sends out thousands of email. I'm getting several timeout error on only a few particular hosts. What I found is almost all of them are Exim 4.69
maillog shows
--> timeout waiting for input from ..@xxx during client greeting
after several tries, I finally got bounce back with
--> 451 4.4.1 reply: read error from xxx.com.
.. Deferred: Connection timed out with xxx.com.
Message could not be delivered for X day
Message will be deleted from queue
When i search though maillog with all of those error and they all seems to be running Exim and they are different mail domains.
I have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
Does webmin have to install on same box with Apache? Or can I install on any box within the LAN?
View 7 Replies View RelatedI tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
Is the ubuntu keyserver broken? I am trying to install a package and every time I try to install the key I get a time out error.
apt-update give me
Code:
W: GPG error: [URL karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 932062C9CD30EE56
Then if I try to install the key I get this?
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
gpg: requesting key CD30EE56 from hkp server keyserver.ubuntu.com
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Can I tell ubuntu not to bother with the key. I know the package is good and safe to install. I should be the one to judge if its ok to install not ubuntu.
I am trying to install webmin on my server(9.10) by command line
what is the command to see if it is installed or not
I have a dummy server set up in which I am trying to install webmin (which I have done several times in the past and remb it being straightforward and pretty simple!) however when trying to install I keep getting errors.
I install all the perl packages as required :-
sudo apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
After downloading webmin I try and install it:-
sudo dpkg -i webmin_ 1.530 _all.deb
This is where I encounter errors regarding apt-show-versions saying that it is not installed.I try and install it but an error appears stating that apt-show-versions is not installed. So I try and install apt-show-versions and that fails as it states that there is libapt package missing too. When I try to force install both - unable to fetch some archives but maybe run apt-get update or fix missing....It just seems like I am going around in circles (as I have run apt-get update and have run the commands as root...)
Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".
View 11 Replies View RelatedI have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedI am using Endian firewall in order to connect two LANs but I am getting many problems and I don't know how to solve them since there is no much information about this software on the internet. Do yuo know good webpage about this powerful program?
View 5 Replies View RelatedAlright so my apache files are compleatly new, just installed, i placed my server name in http.d file, but now i want webmin to create a VH and i cant figure out how to do it, i keep getting an error like
Code:
I just finished configuring my BIND DNS server through the Webmin interface.
When I try to start BIND, I get the following error:
Code:
This is the named.conf configuration file:
Code:
What I need to change in the file?
Whenever I try to take backup from webmin I get following error message.
Starting backup of module configuration files to /Applications/backup.tar.gz ..
.. failed! TAR failed :
I don't understand meaning of this error.
I tried to install with this command:
rpm -Uvh webmin-1.450-1.noarch.rpm
And got these error messages.
Quote:warning: webmin-1.450-1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 11f63c51
error: can't create transaction lock on /var/lib/rpm/__db.000
I am running Webmin Squid and Dansguardian. Works great. Trying to set up multiple groups now. In the Dansguardian module it has an icon to set up lists and configs for multiple groups. I click it and I get the following:
Global symbol "$debug" requires explicit package name at /usr/share/webmin/dansguardian/setupfiltergroups.cgi line 114.
It repeats this same error message for line 123 138 139 141 302 and 315. I am running Ubuntu 9.10 desktop. Ubuntu is up to date. Not sure if I need another package or not? When I installed Webmin, I installed apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl when I set it up, so I am not sure if I need another module or anything to help with the error?
linux i have configured squid with dansguardian but not able to block the sites and url.. i am accessing dansgaurdian through webmin.. please help me out in the above (with screen shots)
View 2 Replies View RelatedI am current following this how to guide: [URL] I completed it and I am in the testing phases before I make it a public server...I plan to use webmin as my administrative tool on my 2 web servers...Should I install webmin on my load balancers as well? The reason I ask is I want to know if there is any benifit to put it on the load balacers...Would I get any added features?
View 1 Replies View RelatedI installed OpenSSH via tasksel and am using Webmin for administration. I'd like to be able to SSH externally and want to setup the necessary public/private keys to use in FileZilla.
In Webmin, under Servers > SSH Server I can click 'Host Keys' and see an RSA key. Is this the public or private key for my server? Do I need to copy this into a text file to import it into FileZilla on my remote PC (that I want to connect from)? Is that all that needs to be done (aside from opening the port on my router/firewall)?
Is there an automated way to set this up via Webmin?
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...