Ubuntu Networking :: Samba No Longer Working - Caused By Update?

Mar 3, 2010

I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba

Code:

[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)

[code]...

All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Wireless Card No Longer Working After Software Update?

Jun 5, 2010

recently installed 10.04 on his hp pavilion laptop and we got everything working fine, including the wireless internet. When he installed some recommended software updates his card is no longer being detected although wired networking is still fine.

ryan@ryan-laptop:~$ sudo lshw -c network
[sudo] password for ryan:
*-network:0 UNCLAIMED

[code]...

View 9 Replies View Related

Ubuntu Multimedia :: A Recent Update Has Caused IEC958 Output To Stop Working?

Feb 1, 2011

I've recently noticed that my IEC958 digital audio output has stopped working. The short version of why I didn't notice this immediately is that I have two simultaneous audio outputs from my system to my speakers and I hadn't realized the IEC958 output wasn't in use.After messing around with a few settings to no avail, I remembered that I'd recently run update manager (this had to be within the last two weeks) and thought this might be the cause.I have just booted to a 10.10 install disc and verified the IEC958 output works fine there.

Unfortunately I'm not sure which of the recent updates could have caused this problem. Before I submit a bug report on launchpad I was hoping anyone here might have a suggestion as to where to look to figure this out.I'd recently seen this thread and this thread which lead me to believe it may have been a recent kernel update.What's my best course of action to determine the problematic update?[edit]In case anyone needs the info, I'm running Ubuntu 10.10 64 bit on a system with an Intel DH57JG motherboard. Using the HDMI output to a TV, with a separate optical audio cable to my speakers.Also, I've attempted using all of the available digital audio output options in the sound preferences panel and I've also installed gnome-alsamixer and tried enabling/disabling every digital output listed there as well. None of these got the optical output working again.

View 4 Replies View Related

Fedora Networking :: Samba Broken / Error 6291, The "force User" Option Is No Longer Working?

Jun 15, 2009

I ran "yum update" on 03-06-2009 and it updated my samba version from

3.2.8-0.26.fc10.x86_64
to
3.2.11-0.30.fc10.x86_64

My network shares then became read only!After some digging it turns out my system is not working because of Samba bug 6291, the "force user" option is no longer working.

Ideally I would run another "yum update" and that would fix the problem. Apparently the bug has been fixed in Samba 3.4.0pre2 - when can when we expect that to be released and included when I do a "yum update"?

Alternatively how do I get back to version 3.2.8-0.26.fc10.x86_64 ?

View 2 Replies View Related

Software :: Samba Access No Longer Working In Windows 7

Jan 15, 2011

I've recently been experiencing an issue connecting to my Samba shares on a Ubuntu 10.4 server box on my network from a Windows 7 client. If I use Ubuntu 10.10 on the same machine, or a Windows XP Virtual Machine running under both Windows and Linux host the share works absolutely fine.

What happens is if I browse to the hostname or the IP address I see a login prompt (there is access control) but my username and password no longer work. Before I didn't need to login as they are the same as my windows credentials.

I'm not sure what information/logs etc would be most relevant so I've posted some information, if any more is required then let me know where to find it and I'm sure I'll be able to get it.

Here is the last few days of the log when I believe it was working, there are no entries since.

Code:

View 8 Replies View Related

Ubuntu Multimedia :: Sound Is No Longer Working After Update

Dec 5, 2010

I am running 10.10 on a 21.5 inch imac. I just ran some updates and rebooted, turned on rhythmbox to play some tunes and realized there is no sound. Tried ....., no yield. Tried a different user account still no sound. SO I rebooted into osx and I have sound. Its therefore a software issue for sure. I plugged in headphones and changed to the appropriate output in the settings manager, sound came out, but out of phase. What going on here? any ideas would be awesome.

View 4 Replies View Related

Ubuntu Installation :: Update Manager No Longer Working In 11.04?

May 11, 2011

I recently tried to add a repository by following the directions here: Banshee.fm/download and then select the ubuntu icon at the top. Here is the error I get when I try to run update manager: "Could not initialize the package information An unresolvable problem occurred while initializing the package information.

Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'banshee-team/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/banshee-team-ppa-natty.list'The command I entered was sudo add-apt-repository ppa:banshee-team/ppa. I have tried to remove all banshee related checks in software sources of the ubuntu software center. Then I just removed the lines all together. I still cannot open update manger. Get the same error. Anyone know of a fix?

View 6 Replies View Related

CentOS 5 :: KMail And PGP No Longer Working After 5.3 Update?

May 3, 2009

Have a problem to decrypt emails after I updated to 5.3. Didn't change anything to the pgp or Kpgp settings and Kmail says that it failed decryption with openpgp. As I don't know what to look for or what to check I am lost.. it encrypts outgoing messages just fine.

View 1 Replies View Related

Ubuntu Multimedia :: VLC No Longer Working After Update - Cannot Load Module

May 15, 2010

Since my latest update to Ubuntu Lucid, VLC is no longer working. When starting VLC, I get an impractical dark interface that doesn't response to any command.
vlc -v gives this output:

Code:
VLC media player 1.0.6 Goldeneye
[0x9d7f668] main libvlc warning: cannot load module `/usr/lib/vlc/gui/libqt4_plugin.so' (/usr/lib/vlc/gui/libqt4_plugin.so: undefined symbol: _ZN9QListData7append2ERKS_)
[0x9e2e6d0] main demux warning: no access_demux module matching "file" could be loaded
[0x9d7f668] main libvlc: Start vlc met standaardinterface. Gebruik 'cvlc' om vlc zonder interface te gebruiken.
[0x9e5bfa0] main generic error: no dialogs provider module matched "any"
[0xb7400e48] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0xb7400e48] skins2 interface: skin: subX author: Martin Poehlmann
[0xb7400e48] skins2 interface warning: non-unique id: time
[0xb7400e48] skins2 interface warning: non-unique id: songticker
[0xb7400e48] skins2 interface warning: non-unique id: main.normal.dbuttons.info
[0xb7400e48] skins2 interface warning: non-unique id: eq.onoff.lef
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.menu
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.clos

It looks like a Qt4 problem, I have installed Qt4 with all possible dependencies, re-installed vlc several times but no effect! cvlc as proposed doesn't react.

View 4 Replies View Related

Ubuntu Networking :: Can No Longer View Samba Shares

Mar 22, 2010

I use Ubuntu 9.10 on my laptop and Vista Premium on my two desktops. Until recently I was able to view and access my document files on my desktop from within Ubuntu. I can no longer do so.

View 2 Replies View Related

Ubuntu Networking :: Can No Longer Connect To WHS Samba Share

Jun 1, 2011

I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").

Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?

View 1 Replies View Related

Ubuntu Networking :: No Longer Have Samba Shares To WinXP System

Aug 20, 2010

Ever since my upgrade to 10.04 I no longer have Samba shares to my WinXP system(s).I have searched the forums high and low and for the life of me cant figure out what I am doing wrong.I am not able to see my XP system from Ubuntu, nor see my Ubuntu system from XP.Attached here is a copy of my smb.conf.

View 9 Replies View Related

Ubuntu :: Error Caused By Update Manager

Sep 9, 2010

As usual, I let the update manager run.. But now something bad happened and a red button is showing in the system tray, which when I hover my mouse over it, tells me to open package manager or try "sudo apt-get" in terminal to see what is wrong..

If I enter sudo apt-get upgrade, I get the following errors.. How can I fix it.. I am unable to open package manager itself..

Code:
E: Problem parsing dependency Depends
E: Error occurred while processing gconf2 (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.

View 2 Replies View Related

Fedora Servers :: Samba Is Not Working After An Update?

Apr 8, 2009

I've been running a F10 based Samba Server a few months without trouble. Now, after an update, samba is not working any more. When I try to start it manually, it reports the following error:

[root@hawkeye ~]# /etc/rc.d/init.d/smb start
Starting SMB services: /bin/bash: line 1: 3403 Aborted (core dumped) smbd -D [FAILED]
[root@hawkeye ~]#

I've re/installed all samba packages and configure the smb server again from scratch but the problem was not solved. My samba packages are:

[root@hawkeye samba]# rpm -q --all | grep samba
samba-winbind-3.2.8-0.27.fc10.i386
samba-client-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386

[Code]....

View 8 Replies View Related

Ubuntu Networking :: Wireless No Longer Autoconnects After Update?

Nov 18, 2010

10.04 was connecting to wireless on boot up without a problem.After updating, it can no longer do it. I have to click on the wireless icon (which has an exclamation mark through it) and connect to hidden. I can then choose my wireless profile and am asked for my elevated privileges password. Once supplied, the connection is made.I presume the encryption password is 'locked' now at boot.

View 2 Replies View Related

Ubuntu / Apple :: Last Update Caused Sound To Stop

Sep 19, 2010

Macbook Pro 7,1 (current model) - sound worked after adjusting as described here: [URL] Sound stopped after allowing system to update today.

View 5 Replies View Related

Ubuntu :: Update Caused Icons And Appearance To Change Drastically

Aug 4, 2011

I just updated a bunch of things on my system (10.10 x86_64) via synaptic and when I rebooted to finish the update everything looks horrible. All the Icons are different, taskbar is all gray, compiz is acting funny, and the top bar has different icons and coloring. I'm wondering what happened and how I can fix this... I'm guessing it might be the nvidia update, but I'm not sure, here is what I did for the update/install:

Upgraded the following packages:

libsmbclient (2:3.5.4~dfsg-1ubuntu8.4) to 2:3.5.4~dfsg-1ubuntu8.5
libwbclient0 (2:3.5.4~dfsg-1ubuntu8.4) to 2:3.5.4~dfsg-1ubuntu8.5
linux-headers-2.6.35-30 (2.6.35-30.54) to 2.6.35-30.56

[code]....

The only other thing I changed was to turn off the auto-login so I wouldn't have that damn keyring password dialog pop up during login.

Should I try downgrading the NVIDIA package update or look through any particular logs to see what happened?

View 2 Replies View Related

Ubuntu Installation :: Nvidia Update Caused System Boot Freezing

Jun 14, 2010

I had Ubuntu working perfectly until I installed updates for the proprietary Nvidia drivers.Now Ubuntu freezes at the Ubuntu loading screen. Im using Ubuntu 10.04 64bit.I used to know how to access the terminal at bootup but I no longer remember.

View 5 Replies View Related

Ubuntu :: Network-manager-gnome Caused An Error During System Update?

May 16, 2011

Network-manager-gnome caused an error during system update.Quote:network-manager-gnome: Depends: network-manager (>=0.8.99 but 0.8.4~git.20110319t175609.d14809b-0ubuntu3 is to be installedHow can I update network-manager?

View 1 Replies View Related

OpenSUSE Install :: Kernel Update Caused Broken Machine

Sep 25, 2010

I was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?

View 9 Replies View Related

Ubuntu Networking :: Wireless Password No Longer Working?

Apr 9, 2011

A couple days after an update to Ubuntu 10.10's networking stuff I was unable to connect to my wireless network that had a password. Now, I can connect to a different connection that doesn't have a password but when I try to go to mine it doesn't work.

Running on a compaq nc6000

And yes I do know that the password is correct as I am connecting right now on Win7.

View 1 Replies View Related

Fedora Networking :: Internet No Longer Working

Aug 11, 2009

I have been a happy Fedora user since late in the F9 release and now use F11 32 bit.Two days ago my 2wire modem/router took a dive. My ISP sent us a Motorola 3347-02 and since then my computer will not reach the internet. I have read everything I can and still haven't found the solution! Some things that I have tried: Disable network manager and do it manual, configure static IP, wipe system and reload, installed F11 on another computer.None of these have worked.Now I am booting from Ubuntu and have no issue but I can't stand Ubuntu.

View 4 Replies View Related

Networking :: Certain Websites No Longer Working Correctly?

Feb 24, 2011

Starting today I cannot log into [URL] on Linux. Whenever I try to login, it just takes forever and then either Chrome or Firefox tell me that perhaps the site no longer exists. It works perfectly fine on Windows. Strangely it also does not work on my Roku box and is working sporadically on my PS3. I would think it was my ISP or my router if it wasn't working perfectly fine on Windows.

I AM NOT TRYING TO WATCH NETFLIX ON LINUX. I know that doesn't work. I'm just trying to update my queue. I'm having this problem both on Fedora and Ubuntu (latest stable releases on both). I know it's not just loading from cache on my Windows machine because I'm going to pages that I have never been to and it's working just fine. Now, I have not tried signing out and in because then I'll be up a creak. OK, I installed another browser on my Windows computer and I'm able to sign into Netflix just fine. So it's not a sign-in issue.

WHY DOES THIS WORK ON WINDOWS? It's the same browsers - Chrome and Firefox on Linux and Windows and the same network.

ALSO, flickr is not working correctly - I cannot make any comments in the discussions (but can on photos which is ajax-y).

update: also checked a Linux computer using Linux Mint that hasn't been turned on in 2 months. I know it was able to access Netflix back then. Nothing has been changed - not even updates. It also cannot access Netflix. Either taking forever to load [URL] or when trying to login.

via looking in Konqueror, I saw it's trying to go [URL] and that's what makes it so that I cannot connect to [URL] if it considers me to be signed in. And here's what Konqueror said:

The requested operation could not be completed
Connection to Server Closed Unexpectedly
Details of the Request:
URL: http://movies.netflix.com
Protocol: http
Date and Time: Thursday, February 24, 2011 22:56

[Code].....

View 14 Replies View Related

Ubuntu Networking :: Wireless Network No Longer Working On Mobile / What To Do?

Aug 19, 2010

It still works fine if I boot into "good old" Windows. I must say I am SOOO disapointed with the Network Manager in Ubuntu which was great until 10.4 and has been crap ever since. I have had so many problems with my Vodafone USB and had to find an alternative method of getting it to work. Now the last straw is that my wireless LAN card is not getting recognised on startup so I have not connectivity when at home. (USb via Vodafone is no good in my area). I am typing this via an old Windows PC because my Ubuntu just does not work anymore. I have not installed anything new so what has happened - or how can I get it to work again.
I was completely sold on Ubuntu but am now considering reverting to Windows. It would be worth paying for an operating system that actually works, even if I have all the other hassles as well. A year ago Ubuntu was great - it all worked ! Not any more how can all that good work have gone down the pan - I can't understand how anyone could let all these nertwork problems occur - it isn't just me - read the threads - it's widespread.

View 4 Replies View Related

Ubuntu Installation :: Update - Error - PkgProblemResolver:Resolve Generated Breaks - This May Be Caused By Held Packages

Oct 10, 2010

I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages

I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...

View 8 Replies View Related

Ubuntu Networking :: Antenna No Longer Working In Toshiba NB505 Netbook?

Aug 7, 2011

My wife's nebook has Ubuntu 10.04.2 LTS (kernel 2.6.32-33-generic i686), and is using the linux driver for Realtek RTL819x wifi cards. I installed the driver ages ago with:

Code:
$ sudo add-apt-repository ppa:lexical/hwe-wireless
$ sudo apt-get update

[code]...

View 1 Replies View Related

Networking :: Autofs No Longer Working - Finding Source ?

May 23, 2011

After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.

Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive).

The setup was working before and the same exact setup is being used and is fully functional on another computer.

I'm running Ubuntu 11.04

Here is the content of auto.cifs:

Code:

Here is the content of auto.master

Code:

And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders).

When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:

Code:

Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:

Code:

A second or subsequent attempt at "ls -l" results in:

Code:

Note the question marks that are now everywhere.

I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.

View 7 Replies View Related

Ubuntu Networking :: Wireless Not Working After Installing Latest Update From Update Manager?

Sep 30, 2010

As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.

View 1 Replies View Related

Ubuntu Networking :: Wired Internet Not Working Since Update / Wless Not Working

Jun 21, 2010

I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.

View 5 Replies View Related

Ubuntu Networking :: Desperate Now - Samba Update Has Made NAS Unusable?

May 31, 2010

I have had a good look round the forums but cannot come up with anything quite like this and the problem prevents me from using my NAS box and stuff is starting to stack up on my main PC now...

I have a Dell desktop running Ubuntu 9.04, a Shuttle running Mythbuntu 9.10 and a Netgear ReadyNAS Duo, all of which worked fine until this problem started. I have done nothing to any config files nor have I modified any settings from the outset, as far as I can remember I have just used everything as it came. This problem probably started a month or so back when update manager suggested a Samba update on both PC's which I accepted. I don't fire up my NAS box more than once or twice a month to back all my photos, music, video etc. so it was a while before I did (following the update) I could see the NAS and the Shuttle from the Dell but couldn't browse them I just got the error message 'Unable to mount location. Failed to retrieve share list from server' which I gather is all too common. I have searched around a bit on these forums and have tried a few things in the command line to gather information and I found something that worried me rather a lot. From Dell:


Code:
geoff@geoff-dell:~$ findsmb
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION

[Code]...

I haven't done any updates on the NAS box firmware so it can't be that and now I don't even see the shares in filemanager. What on earth is going on??? I know there are many other threads similar to this but but I am hoping that the slight difference might make this more obvious to solve. I forgot to mention that now I don't even see the shares in filedmanager - another thing that happened all by itself!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved