One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
I have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies View Relatedi was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedI was having a problem on my squid server whereby 1 website would timeout daily and return a nscd not found error: [url]....There may be other sites but this is the only one I know of. A selection of other sites still work correctly, which is the strange thing.I have found that by restarting the dns cache everything works again: /etc/init.d/nscd restart.I never know quite when this will timeout so it is not very good for people accessing that site on the server.
View 3 Replies View Relatedtype the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies View RelatedI'm running sendmail 8.14 which sends out thousands of email. I'm getting several timeout error on only a few particular hosts. What I found is almost all of them are Exim 4.69
maillog shows
--> timeout waiting for input from ..@xxx during client greeting
after several tries, I finally got bounce back with
--> 451 4.4.1 reply: read error from xxx.com.
.. Deferred: Connection timed out with xxx.com.
Message could not be delivered for X day
Message will be deleted from queue
When i search though maillog with all of those error and they all seems to be running Exim and they are different mail domains.
I'm attempting to install Webmin in Endian I download the tar.gz file and ran setup.sh and it says it is installed, however it doesn't let me go to the webpage it says. I get a timeout error. I'm using the current version of endian and webmin.
View 4 Replies View RelatedI have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".
View 11 Replies View Relatedpulled up an old clunker and put centos 5.4 on it the other day. well the grub spash screen appears but i have to manually hit enter to select a kernel.at the /boot/grub/grub.conf file and timeout=5. this is a new install. so I tried changing that value to 0 and it does boot the kernel immediately but never displays the splash screen. so something is not right I assume. btw I see a message (loading stage 2) for about 20 seconds as the computer boots and I have never seen that message on my ubuntu machine, so I wonder if something is off there.
View 4 Replies View RelatedI have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedI have centos 5.3 server and the problem is the ssh timeout time set to 10 minutes of inactivity. I want to set the timeout to 1 hour, how can I set the timeout time?
View 1 Replies View RelatedThe normal distros now ship with an executable called "timeout". Will CentOS be including this new "timeout" command in an upcoming release?
I read that CentOS did not include it (yet) because of a name conflict with another package.
The problems I was having earlier: [URL]seemed to be solved.
I was not getting any error messages after restart. I should have powered down fully, but did not think that it would make a difference. :(
The same issue is again occurring, but after shutdown ONLY and only on the first boot. After the first boot, a system restart will not cause any error messages. (I have rebooted at least ten or twenty times to make sure)
But after a system shutdown, the first boot hangs up and I get the
"Red Hat nash version 5.1.19.6 starting hdb: timeout waiting for DMA hdb: drive not ready for command"
errors five or six times before each boot. Also the system boots very slowly the first time.
I used the getinfo.sh all command and posted the info to the suggested site here: [URL]
Is it possible this could be a hardware issue? This is an old salvaged HDD. Ive changed everything I c an think of in the BIOS with no results.
I have used the hdparm -d /dev/hdb command and verified that dma is not being used on initial boot or after a shutoff but IS being used after a reboot...
here are the HDD settings
/dev/hdb:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
[Code]....
I am a complete novice when it comes to Linux, but want to learn, and installed CentOS5 on an old P4 Dell I had lying around.
Dell Dimension 8100 BIOS is version A02
Install seemed to go fine, but when I power up I get the following message
Red Hat nash version 5.1.19.6 starting
hdb: timeout waiting for DMA
hdb: drive not ready for command
this happens a few times each, then CentOS finally loads.
If Im understanding this right, DMA is direct memory access.
Is it possible the hard drive, motherboard etc does not support this?
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
I am having a problem with 5.4 that I did not have with 4.5. The problem happens only sometimes but in specific instances. Basically a summary of the problem is that certain network transactions timeout. The specific instances are with wget, rpm, http. The problem usually, but not always, occurs with pptp stuff. (NOT running pptp but getting pptp stuff). For instance, the following command, which finishes in seconds on non-5.4 OS's:
wget [URL]
downloads about 20% then gets stuck. About 5 minutes later it downloads another 20% and then gets stuck, etc. The same thing with rpm:
rpm -ivh [URL]
waits about 3 minutes and then gives an error. I think it does the same thing as the wget but
wget will keep trying, while rpm gives up. The error from rpm:
Retrieving [URL]
..five minutes later:
I can wget the above as I mentioned before and install it that way. Before I do it, yum works fine. Afterwards, yum exhibits the same behavior of timing out (because it is using the pptp repository). Also visiting the pptp web site from Firefox times out on certain pages. I originally thought it was some problem with the pptp site, but I notice that log into hotmail.com. Does the same thin (fine on other operating systems). A view with Wireshark on the wget (pptp) shows the my machine receiving a reassembled TCPPDU from 216.34.181.96 (Sourceforge), sending an ack, receiving a reassembled PDU, sending an ack, receiving, sending followed by the 5 minutes or whatever of nothing. Then sourceforge sends an RST and a SYN and the process is repeated.
When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 going through the router through Comcast is when I had the problem. So it is probably something with the router, but it is hard to figure out since CentOS 4.5 and Fedora do not exhibit this behavior, nor does 5.4 on most sites (mail.yahoo.com for instance). I did verify, at least from what I could, that ICMP type 3 and 4 are not being blocked. If they were, the same problem would happen on other op systems. And I was able to ping, albeit just locally, but we looked at the router settings and ping was not blocked.
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I'm trying to get the options for rotate timeout to work and it does not.Timeout always seems to defaults to 1 sec no mater what value I set it to, which is fine but still the option does not work.I'm setting these according to the manpage for resolv.conf, please Let me know if I'm missing somethingHere is my resolv.conf file
domain spd.net
options timeout:1
options rotate
[code]....
I have a windows 7 box and a debian 5.0 box connected to a linksys wrt300n router. I can access the linux box from windows 7 through ssh. I used to be able to access the linux box from outside the LAN, but when I was messing with the ssh port configuration (at least I think this was what happened), i lost my ability to connect. I tried writing a new sshd_config file so that it is much simpler:
Protocol 2
PasswordAuthentication no
UsePAM yes
I tried directly connecting the linux box to the internet to rule out a router firewall issue that i was missing. iptables -L yields nothing, as I have since rebooted the machine since messing with iptables rules. But still, when I try to ssh in from outside the LAN, I get a connection timeout error after a 10-15 second hang.
I get the following error when BOOTING up with Ubuntu 9.10 & in dmesg:
phy0: noise floor calibration timeout
I think it is also causing one of my USB Serial devices to work improperly.I tried changing all the hardware (laptop(motherboard etc.), USB Serial device, & USB hub) but that did not resolve the issue.My code was previously working on an older version of ubuntu (9.04).As I boot up (before any of my software is run), bytes are written to my USB Serial (FTDI SIO) device.I also tried this on a fresh install & it appears that some bytes are being written to the serial divice(20 x 2 character LCD) while it is booting upIs there a bug with Ubuntu 9.10?
Is the ubuntu keyserver broken? I am trying to install a package and every time I try to install the key I get a time out error.
apt-update give me
Code:
W: GPG error: [URL karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 932062C9CD30EE56
Then if I try to install the key I get this?
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
gpg: requesting key CD30EE56 from hkp server keyserver.ubuntu.com
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Can I tell ubuntu not to bother with the key. I know the package is good and safe to install. I should be the one to judge if its ok to install not ubuntu.
I am trying to use Tiny Core as the OS for a fairly old embedded device using a Pentium 100 with 64MB Ram.
I managed to get the Tiny Core image loaded onto a 128MB CF card. When I turn the box on, it presents me the Grup screen and I can select the bootup option (tinycore). However, soon after I am getting a DMA Timeout Error.
Also in this link: http://www.linuxquestions.org/questi...ble-it-734489/
Now, I am not familiar with Tiny Core all that well, and neither am I sure of how to modify the initramfs to include: hdparm -d0 /dev/hdb.
for some reason, which I have exhausted all my thoughts upon..
I have mysql 5.0.77
I just made an amendment to the auto_increment_increment variable.. from 10 to 1
Gone to restart mysqld (im on redhat FYI) and get the error:
'Timeout error occurred trying to start MySQL Daemon.'
It fails to stop, and obviously fails to start.
I have included below my 'my.cnf' file but I cant see any issues with it, and can't for the life of me think why there is something wrong.
If I ever come across an issue, I don't tend to ask but instead try and figure it out (usually with success) but this time.. I just cannot get my head around it..
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
View 1 Replies View RelatedI am on CENTOS 5.4 64 Bit Servers.
I have created a script which runs some commands on remote servers.
I am stucked when a server is not responding timely.
I want to set a timeout say after 10 seconds, if I am unable to login (for whatever reason) I should be dropped back at the shell.
I tried using LoginGraceTime but it is not working for me as below:
Code:
LoginGraceTime 10s
or
LoginGraceTime 10
I am trying to set my root password for my mysql database. After I enter /etc/init.d/mysqld start
[code]...
Timeout error occurred trying to start MySQL Daemon. Then when I try to set the password for my root account I get
[code]...