I use Ubuntu 9.10 on my laptop and Vista Premium on my two desktops. Until recently I was able to view and access my document files on my desktop from within Ubuntu. I can no longer do so.
View 2 RepliesEver since my upgrade to 10.04 I no longer have Samba shares to my WinXP system(s).I have searched the forums high and low and for the life of me cant figure out what I am doing wrong.I am not able to see my XP system from Ubuntu, nor see my Ubuntu system from XP.Attached here is a copy of my smb.conf.
View 9 Replies View RelatedI have a fresh installation of Ubuntu 10.04 LTS I have installed Boxee on it that is all and I am trying to set it up as a Samba Server. I have followed the instructions on following page:[URL]..On the box that I am trying to setup as a Samba Server using Nautilus I can view the shares no problem. On another Ubuntu box no such luck. I can get too Windows Network and I can see my workgroup. When I try and open the workgroup I get the following dialogue box for some time: Opening "WORKGROUP". You can stop this operation by clicking cancel. And then this error dialogue box:
Unable to mount location Failed to retrieve share list from server I have spent sometime trying to resolve this myself but have had little luck. As far as I know I have no firewalls in place; Ubuntu does not have one by default is that correct? At this time I don't have a Windows computer to try to connect too the server at this time, but plan to in the future that is why I want to use Samba.
I am connecting the two boxes with an D-Link DIR-825 router; both boxes are on the same subnet. Are there settings in the router that could be affecting this?
I have had server running for over a year and have run into my first major issue. I am no longer able to browse to the server by hostname or IP and view all available Samba shares. I receive a windows popup informing me I do not have permissions However I am still able to browse to the shares themselves \hostnameshare.I am currently assuming this is an issue with the config of the samba share module/
View 2 Replies View RelatedI just installed a F12 server at home, replacing a FC9 server that ran samba to share media files. I had no problems connecting to samba on FC9 (the version escapes me, sorry) however Win7 seems to be fighting the F12 samba (v3.4.7) trying to do the same thing. I create a directory share, it shows up in windows explorer, but when I try and open it win7 tells me I dont have rights to it.
I created a printer share via samba, and successfully connected to it from win7 and use it as my default printer, and that works OK. I know win7 uses smb2 as its samba protocol, and that might be some of the problem (or all of it), but I'm not sure. I also have googled and saw that people have had had issues with samba as their domain controller while trying to join win7 into the domain, however I do not use win7 as a pdc at all. The solution for this seems to be registry hacks, but I am not sure they apply to me as I haven't seen anyone correlate it. Tailing the logs, this is what I see when I try and explore the file share from win7:
Code:
[2010/04/26 13:09:56, 1] smbd/notify_inotify.c:421(inotify_watch)
inotify_add_watch returned Permission denied
Now I have edited smb.conf manually in the past but to try anything I've even played with webmin to see all the options I might be missing, still my conf is fairly simple:
[Code]...
I see the movies share in win7, but it doesn't let me in. I tried disabling requiring 128bit encryption for NTLM as one suggestion but that didn't work. Also changing local security policies to send LM & NTLM responses, and that didn't work.
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies View RelatedHaving a bit of a minor issue with samba on Opensuse 11.4 64 bit. My problem is that I can't view my samba shares in Dolphin although I know they are there. If I bring up dolphin using the Opensuse shortcuts to samba I get this
My computers / drives attached to my network should be viewable here yet they are not. However, if I type in the address directly I can view and access my shares.e.g.
Here is a copy of my smb.conf
Code:
[global]
workgroup = farcusnet
netbios name = ThinkPad
passdb backend = tdbsam
name resolve order = bcast host lmhosts wins
printing = cups
[Code]...
Everything was working well between my Windows 7 shares and all three of my Ubuntu machines. I just replaced my buggy belkin router with a Netgear one and now none of the Ubuntu machines can open my windows box through Nautilus. All three (one 10.04, 2 10.10) can see the Windows box but when I click on it I get the never ending password prompts. My Mac can access the Windows 7 machine fine, and all three Ubuntu boxes can access the shares with CIFS/autofs. I just can't browse the available shares using Places->Network. I'm lead to believe something on Win 7 reset when I changed the router but after two days I'm at a loss as to what it could be.
View 3 Replies View RelatedI am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I have an Ubuntu 9.10 Samba file server. I have set up Ubuntu 10.04 netbook remix in a home network which also has Windows XP home and Vista computers already present in the network. The XP and Vista machines have no problem accessing the file shares.
The server is running mhddfs with FlexRaid. The security is set to share level access. I have a hosts allow line in the smb.conf file to permit access to certain IP addresses and have added the 10.04 netbook remix IP address to this hosts allow line.
I cannot access shares from the 10.04netbook remix machine if the hosts allow line is active, but have no problem from the windows machines. If i comment out the hosts allow line, all machines can access the share, including the netbook remix machine. I am fairly new to Linux and would appreciate any help in solving this problem.
I have setup Samba shares on my Ubuntu 10.10 and assigned different different username and password combination for each share.
The sharing works perfectly fine on all the Windows machines but it does not work on OSX. When I try to connect using OSX, it ends up showing waiting icon (screenshot attached) after entering username and password. (It asks for the login details after selecting the share from the list)
Following is my smb file content:
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
find that i cant access from my ubuntu box (desktop), now running 11.04 (i was able to access yesterday, when i tested the config). I CAN access from my XP and Win7 virtualboxes.and also from another win7 on the house.. So server is working good aparently.This is all i modified from the default config file:
Code:
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
[code]....
I'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
View 2 Replies View RelatedI setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
i have a file server running kubuntu and samba, when i plugged it into a different router, the router assigned it a different IP address (as I expected - its using DHCP) - but the old router was supplying 192.168.1.x type IP's and now the new router is suppliing 10.0.0.x type addresses.I now cannt see the samba shares on the file server.the computers can ping each other and they have working connections to the internet
View 1 Replies View RelatedIs there a way I can set a storage quota for samba shares, so that way a user can only store up to 2gb of data in a certain share?
View 4 Replies View RelatedBeen trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
I'm trying to setup two samba shares on ubuntu server 10.04.1 lts x64
The first is a Read-Only share for windows users that doesn't require a password. This i've managed to do so far.
The second is a Password protected Upload share. So far I am able to have both shares (which access the same directory) but am unable to log in to the pass word protected share.
I know i'm not doing things quite right, and would like a little bit of help
The smb.conf file is the default ubuntu file with these added shares:
Code:
[NAS]
Comment = Network Attached Storage
path = /media/RAID/NAS
browseable = yes
[Code].....
Just set up Ubuntu 10.4 AMD64 on an old machine. We have an existing Ubuntu machine acting as a SAMBA file sharer. The other machines, windows and ubuntu have no problem in accessing files on the server. This machine reports that it can see the server on the network but instead of the expected data we see what is on the local machine. I admit I am out of my depth with SAMBA.
View 1 Replies View RelatedI have a NAS running Samba. My Samba shares are accessed from a Windows computer, it works very well.
With the kubuntu 10.04 computer, things are different : I can see the Samba shares in Dolphin, and copy files to the local drive, but lots of applications don't allow me to open a file on a Samba share.
Some applications such as OpenOffice let me browse to the share but refuse to open the remote file
Some other applications don't let me browse to shares at all.
What's up with that ? Surely I'm not the only one wanting to access files on a NAS ? How do other people do it ?
PS I chose kubuntu 10.04 because the 10.10 install hangs, the "ui" workaround I saw here and there did not work, the only solution offered was to go back to 10.04
I have some samba shares working where all I did was right click on the folder, enable sharing and enable guest access. These work fine.
However, when I tried to use the manual way:
[URL]
to create samba shares, so that they would be password protected, I cant access them. In windows 7, the shares are visible so I click them, click "use another account" and type in my samba name and password I created, but I can't access them.
Here is smb.conf
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
[Code].....
So my brother has a home network that is setup with multiple workgroups (don't ask why - I have no idea and he refuses to change it). Anyways I just installed Mint 9 (Ubuntu 10.04) on my mother's computer and I need it to be able to access the fileserver in her house where her data is stored. The Mint system is part of the default workgroup and can only see one other system in this workgroup.
The workgroup the file server is a part of is called "hobnw", the server's name is "fileserver", and the share I want to connect to is called "TV Shows" How can I connect to this network share on Linux? (I also know the username and password) When I browse the network under nautilus all I see is the default workgroup and no others. All of the Windows systems on the network (Windows XP, Vista, and Win7) all see and can access the file server without issues.
I'm having trouble setting up samba to work with my vista machine. Whenever I try to mount certain shares I'm getting error 13- permission denied. Specifically, I'm trying to mount my entire C: with this command at the console:
mount.cifs //windows_box/C$ /mnt/windows -o username=tyler,password=****
I've also tried:
mount -t smbfs
mount -t cifs
The funny thing is that I CAN mount some other shares, but not all. My distro is slack-current. I've been following as many relevant threads on this issue for a while now and have tried as many of the suggestions as I could understand, but it's getting to the point that I've lost track of what I've tried and what I haven't. Things I have tried:
Checking permissions on the shares: seem to be ok
enabling encrypted passwords: not sure if I did it right.
editing the registry for LmCompatablity
[code].....
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies View Relatedon 10.04 I clicked to share my music folder with the network (other computer also having 10.04) and it installed samba for me. I restarted expecting to find sharing working as it had on the other computer by doing the exact same thing. But for some strange reason I can't access the shares on either computer through the network workgroup. It just says "Unable to Mount Location".
View 7 Replies View Relatedi have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
In 10.10, after installing samba and nfs through shares-admin, when adding a shared folder, i only see share through NFS listed, not samba
View 1 Replies View RelatedI have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers.Internet connection is not working on any of the windows computers. I have eth1 set to "shared to other computers" under the IPv4 settings
View 5 Replies View RelatedI have a Natty headless server that I would like to set up shared directories and grant specific users write permissions. I use a Windows 2008 R2 machine with Active Directory for authentication and have created a group GroupWithWriteAccess which I want to have write access to the shared directory. I want all other users to have read only access. I have edited my smb.conf file with the following
Code:
[TV]
path = /media/share/Media/TV
writeable = yes
write list = primaryuser @GroupWithWriteAccess
create mode = 0660
directory mode = 0770
The machine is fully setup to work with Windows authentication and I can access shares from the ubuntu machine, it's just sharing local directories with the correct permissions that I can't work out. So far I can access the files from my other machine, but I do not have write access even though I am logged on as a user who is a member of GroupWithWriteAccess.
After latest samba updates from updates-testing (F11) I can't copy any file from the network via samba: when copy process reaches almost end of the file, error message appears 'Invalid argument'. Such error happens with any read attempt on a network file - the last ~5% of a file can not be read.
View 1 Replies View Related