Server :: Unable To Run Installation In Text Interface Mode
Mar 19, 2010
im currently using a RHEL5 RIS server in my Lab to deploy rhel5 for all my systems. everything has been configured and installation works fine, but i am not able to run the installation in text interface mode. when i type "linux text", i get an error saying invalid kernel parameter. i'll paste my /etc/dhcpd.conf file here. please have a look and let me know what changes i should be making in order for my text interface installation to be working.
View 1 Replies
ADVERTISEMENT
Jun 30, 2010
I have posted about 20 Slitaz Video Tutorial I made. I thought it might be helpful for new comers to Slitaz. I've have 2 playlists. One for the GUI interface and one for Text-Mode. Both playlists can be found at:[URL].. Let me know if there is anything you would like me to go over in future tutorials.
View 2 Replies
View Related
Jun 30, 2009
I had tried to install Centos 5.3 using the graphical interface but it gives me a black screen with no response. I've read into it and installed in text mode but still need a graphical interface. Whats the command/steps I need to take?
View 1 Replies
View Related
Sep 14, 2009
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies
View Related
Nov 24, 2009
I installed Fedora 11 on my system (see below) using the i686 DVD. The graphical install worked just fine, and after the system booted back up, the X server was working very well.
There is no boot text. On the other system with Fedora 11, I can see the boot text scroll by in the window and/or a progress bar at the bottom of the monitor during the boot sequence. On this system, the monitor says "No Input", and nothing appears until the login prompt for the X window. I am able to enter the BIOS configuration page and navigate through it without any issues. I can also edit the grub commands before Fedora loads without a problem.
If I boot in text mode, no login prompt appears. If I wait long enough, the monitor enters the power save mode since it is not receiving a signal. I am able to log in to the system with my user name and password, and then start the X server. Once the server starts, the monitor turns back ON and all is well.
From the X window, I use the CTL+ALT+F2 key to enter text mode. The monitor stops responding. If I press the ENTER key a couple of times, then press ALT+F7, I can briefly see the text window with a couple of login prompts before the X window starts responding again.
How can I get the text mode to work? Why is there no input to the monitor when booting?
System:
Intel D945GSEJT motherboard with Intel Atom N270 processor
2GB RAM
120GB SATA Hard Drive
Fedora 11 i686
View 4 Replies
View Related
Jan 1, 2011
I recently installed ubuntu 10.10 on my Acer Aspire laptop 5745G-7671 laptop. It has an Nvidia Geforce gt 420m dedicated card, and an Intel HD integrated GPU. The problem is, I recenly installed a driver for it (because ubuntu had already found a driver in hardware management). After I did that, everytime I try to start ubuntu, I can no longer see any GUI interface.I have tried everything. I tried restarting X (which doesn't seem to work in Ubuntu 10.10, and tried holding CTRL+ALT+F7 too, but it just displays a few "[ OK ]" messages.
View 1 Replies
View Related
Jan 6, 2010
I run a custom build of linux running kernel 2.6.24 and busybox. At the moment I'm investigating a kernel panic. The problem is that after 10 minutes the screen is blanked, i.e. it is still on but has been turned black. If you press a key then the command prompt is shown once again, but if the kernel has crashed then this won't work and any info about the panic is inaccessible. So I'd like to prevent the display being blanked. I've tried booting with 'apm=off' and 'apm=off acpi=on' kernel parameters but neither had any effect.
View 5 Replies
View Related
Aug 18, 2011
To force myself to use CLI all the time, I've installed Ubuntu Server edition on my work laptop. However, I still want to be able to view PDF ( rendered as normal PDF, not converted to text ). Basically I want a totally CLI environment, except for PDF viewer.
View 1 Replies
View Related
Dec 25, 2010
I installed it on very old machine P3 1200Mhz and it works ok but I have problem with text mode because I have 75x132 aprocs. text on screen and I don't see what I type or system replay. Is there simple way to change to 25x80 or something with greater letters. I don't have GDI.Someone sad to me to do:sudo dpkg-reconfigure console-setupand it's does the job but when I restart system it's gone.
View 3 Replies
View Related
Nov 5, 2009
I would like to write a text user interface (TUI) to adjust some text config files etc. Is there a tool or application for creating TUIs like this. I�m talking about those types of config tools which you see executed at first boot.
View 19 Replies
View Related
Feb 24, 2011
I'm trying to setup and configure a server entirely with text only run mode 3 on a virtual machine so I can redo my current live server. I'm now trying to set up the firewall of the system using iptables. I've read up on it and came up with the following:
-clear all rules
#iptables -F
-set default policy rules
#iptables --policy INPUT DROP
#iptables --policy FORWARD DROP
[Code]....
Everything above worked for me but just out of interest I looked at my live server which was configured using a GUI. I ran iptables-save and it was pretty much the same but its port open lines read like this:
#iptables -A INPUT -p tcp -m state --state NEW --dport 80 -j ACCEPT
so finally my question is do I really need the "-m state --state NEW"? Wouldn't having that drop established connections on those ports? I'm just confused as to what exactly the NEW state is doing and would it make a difference if I didn't include it.
View 5 Replies
View Related
Mar 4, 2009
Can you give me a step by step screenshot procedure in installing Fedora Version 8 64bit?
View 6 Replies
View Related
Mar 4, 2009
It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.
View 14 Replies
View Related
Aug 27, 2009
I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
View 7 Replies
View Related
May 31, 2011
I made a clean installation of F15 on my laptop, is a Qosmio x505, it has an nvidia M360, so I download the nvidia drivers and intall it separatly.To install the nvidia drivers I change the runlevel with the commandln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.targetAnd then, change it again to the graphical mode with the commandln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.targetEverything seems ok, but the system only boot in text mode. I can load the Gnome with the command startx without problems, but how can I made that it loads the Gnome automatically?
View 2 Replies
View Related
Jun 30, 2010
I have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies
View Related
Jan 19, 2011
I have installed Ubuntu 6.06 LTS via the command line interface. I installed onto Microsoft Virtual PC on the mac. The installation completed successfully. On first boot, I see the text is spread out very wide on the screen. It's like the screen has been zoomed out greatly.
I assume I have to modify the x11 configuration, but I forget how to do this.
Here is an image of the screen:
I tried installing a more recent version of Ubuntu but ran into other troubles. more on that later.
View 5 Replies
View Related
May 19, 2009
I wanna install Fedora 10 in text mode and use it in text mode. So i wanna know what kinda packages or software i should exclude when installing to save some time and space.
View 1 Replies
View Related
Feb 16, 2010
I'm using in the server 8.4 and installed the package startupmanager which is GUI, through this package I can show the text during boot, unlike in the 9.10, I checked the "show the text during boot" same I did in the 8.4 bu It's not showing the text and still show the splash...
how to change it direct from shell instead of the stupid GUI
View 6 Replies
View Related
Oct 28, 2010
I upgraded from 10.04 to 10.10. When booting, there is this "Ubuntu" writing on purple background and dots which are lighting up in order. On my machine this is in text mode. In 10.04 it was graphical. What can I do to have it again graphical?
View 1 Replies
View Related
Jan 23, 2009
On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies
View Related
Dec 27, 2009
Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
View 2 Replies
View Related
Mar 25, 2010
I install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.
View 1 Replies
View Related
Jul 2, 2010
when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies
View Related
Jan 8, 2011
I just bought a new Toshiba Satellite C650D which has AMD processor. For some rescuing, I wanted to put ubuntu live CD. Ubuntu starts with some screen but then it converts to text mode and just sit there. I have checked md5sum of the iso file I got , before burning it on the CD. After burning the image, I also checked the directory structure on the iso file and the CD. They are fine. Currently I am writing this from XP. How do I use Ubuntu Live CD.
For burning, I used infrarecorder with 'Burn Image' option. I had installed debian and win xp with the same CD , so I can't see the problem with the CD. Anyway, I tried doing this with different CD and the same problem appears.
The CD's are memorex
CD-RW 700 MB 4X multi speed.
And I don't get the ubuntu boot screen at all. Some screen with ubuntu symbol appears and then text mode with some information about the hardware and it hangs there.
View 9 Replies
View Related
Jan 16, 2011
I'm some what new to ubuntu and i would really like to start using it as my main operating system and get rid of windows. The first problem i face here is that I am unable to install Ubuntu using the normal gui mode.As soon as i select the option to install ubuntu the files starts loading and then the screen goes blank.. but the monitor is still live. So i installed ubuntu using the text based installer.. everything went fine, i installed the system and at boot loader i selected my Os but still the old demon comes in "Blank screen". I've tried all the related forums and tried all the options best to my knowledge, but its still the same.. I am not even able to get a command prompt/terminal. I know that this is a problem with my ATI (i can hear the sighs!!!!!) video card. Now I know that Ubuntu is being loaded cause i can hear the welcome sound of Ubuntu(drums sound).
View 2 Replies
View Related
Apr 30, 2010
I trying install fedora 12 in text mode, but every time the system crash, i cant install in text mode. Someone have one solution ?
View 1 Replies
View Related
Apr 28, 2010
I did a text installation of the Minimal Install CD of 9.10 (Karmic) and wound up with a console only. I installed Icewm, how to boot to graphic (GUI) mode.
View 5 Replies
View Related
Oct 23, 2010
It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.
Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!
Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.
Here are the specs of the system if it can help:
CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard
Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.
My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.
View 5 Replies
View Related
Feb 23, 2010
I have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
View 8 Replies
View Related
