I have posted about 20 Slitaz Video Tutorial I made. I thought it might be helpful for new comers to Slitaz. I've have 2 playlists. One for the GUI interface and one for Text-Mode. Both playlists can be found at:[URL].. Let me know if there is anything you would like me to go over in future tutorials.
View 2 Repliesim currently using a RHEL5 RIS server in my Lab to deploy rhel5 for all my systems. everything has been configured and installation works fine, but i am not able to run the installation in text interface mode. when i type "linux text", i get an error saying invalid kernel parameter. i'll paste my /etc/dhcpd.conf file here. please have a look and let me know what changes i should be making in order for my text interface installation to be working.
View 1 Replies View RelatedI had tried to install Centos 5.3 using the graphical interface but it gives me a black screen with no response. I've read into it and installed in text mode but still need a graphical interface. Whats the command/steps I need to take?
View 1 Replies View RelatedI would like to write a text user interface (TUI) to adjust some text config files etc. Is there a tool or application for creating TUIs like this. I�m talking about those types of config tools which you see executed at first boot.
View 19 Replies View RelatedThe system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedI have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies View RelatedI, too, have a dual-monitor set up. I would like to use one monitor to run X11, and the other to run a text-only mode, like when you press ctrl+alt+fX, where 1 <= X <= 6.
View 2 Replies View RelatedCtrl+alt+(f1-f6) does not work..Am using VMware just for Practice purpose.
I have installed Redhat Enterprise Linux 5.But Whenever i start my System(VMWare)it shows the GUI mode.When i press Ctrl+alt+f1 etc...i could not get the text mode.
I changed the default setting in /etc/inittab but when changed it logs on to text mode and i could not get GUI mode when Ctrl+alt+f7 is pressed.
I want to know how we can install redhat Linux Enterprise in text mode on my system?
View 4 Replies View Relatedhow to install fedora 11 from text mode . I am in a situation to install in text mode only .there is no such option in fedora 11 . Because i have already installed fedora 9 in text mode.
View 2 Replies View Relatedis it possible to view png or pdf files in linux text-mode?
View 1 Replies View RelatedI am looking for a text mode paint program for linux.
Like... something that uses ncurses or something to paint images without having X installed.
Does such a program exist?
If so where can I find it?
I have a problem with my newly installed ATI driver so my Fedora 12 boots to a frozen graphic mode display.I need to force it to boot to text mode interface to start adjusting my X configuration. What to do?This is a new Fedora 12 installation without any change to GRUB etc.
View 2 Replies View RelatedI want to scroll back 10000+ lines in text mode linux terminal. As there is an unlimit option in gnome-terminal, so I guess if this is also possible in text mode?
View 2 Replies View RelatedI looked at links2 and elinks - neither one seems to even support a simple javascript redirect on a site.
View 2 Replies View RelatedI have a ubuntu linux working in TEXT mode. I would like the change the font size (or if possible, get my terminal with inconsolata font). How can i do it?
PS: i don't have a GUI or X Windows running.
sudo dpkg-reconfigure console-setup
To force myself to use CLI all the time, I've installed Ubuntu Server edition on my work laptop. However, I still want to be able to view PDF ( rendered as normal PDF, not converted to text ). Basically I want a totally CLI environment, except for PDF viewer.
View 1 Replies View RelatedI installed fandora 14.I modified "/etc/inittab" for change "text mode".
id:5:initdefault:
to
id:3:initdefault:
And I want to disappear the booting logo splash. Beacuse I want to see kernel messages at the linux booting.
How to install linux by using text mode or fdisk tool
View 3 Replies View RelatedHow to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
What are the differences between "su -" in a GUI terminal and directly logging in as root in a text mode terminal (tty1-tty6)? Any environment, path or other functionality differences?
View 14 Replies View RelatedBelow is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
After trying many diferent LiveCD Distros I found one that is pretty perfect for me, the SLAX one, especially because it gives me the option to start directly on a command line mode (wich is what I'm focusing now). So I'm wondering what others distros have this option at startup. I guess Slackware has this too right? Can you sugest any other distro with that option?
View 2 Replies View RelatedI recently installed ubuntu 10.10 on my Acer Aspire laptop 5745G-7671 laptop. It has an Nvidia Geforce gt 420m dedicated card, and an Intel HD integrated GPU. The problem is, I recenly installed a driver for it (because ubuntu had already found a driver in hardware management). After I did that, everytime I try to start ubuntu, I can no longer see any GUI interface.I have tried everything. I tried restarting X (which doesn't seem to work in Ubuntu 10.10, and tried holding CTRL+ALT+F7 too, but it just displays a few "[ OK ]" messages.
View 1 Replies View Relatedi am wanting to turn my Debian box into a wireless AP, but for some unknown reason the wireless card won't switch into master mode when i run the command #iwconfig wlan1 mode master i get this Error for wireless request "Set Mode" (8B06): SET failed on device wlan1 ; Invalid argument. what does this mean and what do i need to configure/install to get it to work my wirless card is supported i checked it's a zydas chipset using the zd1211rw driver SMC EZ Connect SMCWUSB-G [URL]
View 14 Replies View Relatedopening a text file from glade interface.how?using c code
View 1 Replies View RelatedI try to set-up an Access point using ubuntu 11.04. I am using the minimal configuration file from [URL] together with a TP-Link TL-WN422G (Atheros chipset). I've installed the linux-backports-net-natty-generic drivers. But when trying to start hostapd I always get this output:
Code:
# hostapd -dd -K test.conf
Configuration file: test.conf
Failed to set interface wlan0 to master mode.
nl80211 driver initialization failed.
wlan0: Unable to setup interface.
ELOOP: remaining socket: sock=5 eloop_data=0x9b9440 user_data=(nil) handler=0x43d980
I have also disabled the network-manager for this device by adding this to /etc/network/interfaces:
Code:
iface wlan0 inet manual
cat test.conf:
Code:
interface=wlan0
driver=nl80211
ssid=test
channel=1
lsusb says:
Code:
...
Bus 001 Device 005: ID 0cf3:1006 Atheros Communications, Inc. TP-Link TL-WN422G v2 802.11g [Atheros AR9271]
...
lsmo: .....
Code:
Linux magnet 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
I'm a student who is working on a wireless research project. I have a madwifi driver for Atheros chipset on Debian Linux. With having the wireless interface get into monitor mode, I want to forward the captured packets from the wireless interface to the other Ethernet interface so that a different computer which is connected to this machine via Ethernet receives those packets. I checked that alll packets are received in the wireless interface using TCPDUMP. I tried to forward those packets with IPTABLES like 'iptables -p FORWARD -i ath0 -o eth2 -j ACCEPT' However, I couldn't see any packets forwarded to eth2 using TCPDUMP.
View 5 Replies View RelatedI just did a fresh install of Ubuntu 10.10 and after running the Update Manager and restarting, I get the following message upon boot:
Code:
shpchp 0000:00:01.0: Cannot reserve MMIO region
Too many connections
[code]...
I have old mandrake installed and boot in text mode. Works fine with CRT monitor, but shows out of range in LCD monitor. Is there any way to fix this?
View 3 Replies View Related