I've set up both Postfix and Dovecot on my server. I can currently send mail via Outlook to Postfix over Port 587 (rather than Port 25), and receive mail from Dovecot on Outlook. However, the only mails I am able to receive are those originated from within the server itself. If I attempt to send an e-mail to the address my Outlook listens to, the mail will never reach my Outlook. In other words, no one on the Internet is able to send mail to me.
Can someone tell me:
1) If setting Postfix to listen over Port 587 for my Outlook to send mail outwards is preventing me to have Postfix to listen to mails coming from the Internet? Would I have to turn on both Ports 25 and 587 in /etc/postfix/master.cf?
2) I have configured my Postfix to use saslauthd by authenticating those who are on /etc/passwd. This means I can enter my Linux account details into Outlook in order to connect and download messages. However, does this mean other MTA servers on the Internet who doesn't know my account details are unable to authenticate with my Postfix server and send mails to it?
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
I am using postfix in conjunction with the ispCP Control Panel. Here's some of the recent entries in maillog, when I try to send an email from my gmail address to an email address on this server (I underlined the email addresses).
Code: 2010-06-26T17:57:43.581654-04:00 li136-183 postfix/smtpd[30721]: fatal: No server certs available. TLS can't be enabled 2010-06-26T17:57:43.838633-04:00 li136-183 postfix/smtpd[30710]: warning: connect to 127.0.0.1:12525: Connection refused 2010-06-26T17:57:43.838677-04:00 li136-183 postfix/smtpd[30710]: warning: problem talking to server 127.0.0.1:12525: Connection refused .....
I do not know why I could send email outside but not receive. I use relay to my ISP that port 25 is blocked by my ISP. What can I doing with configuration when it should be works to receive mail? Okay, I have sent a test e-mail between localhost and it works. I can send from mailserver to my gmail without problem. So why I cannot receive email from gmail?
nstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Alright guys, I've looked over every thread regarding this issue on this forum, and many others; yet I cannot find out why my mail is being bounced without error from my external gmail account.From what I've seen, you guys need to start off by seeing my postconf -n
i have a website, there is a button that u click fill out a form and sends u a link to download a trial version of our software, the message gets sent with out html.. i copied a sample below (edited out some personal info)
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
I have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
I just set up a new email server on Debian Lenny. It's Postfix for MTA and Dovecot for IMAPS server. I use Dovecot for authentication. I have two UNIX users on the system (except root), one was added before the installation of Postfix and Dovecot. I'm not doing any virtual things, just plain UNIX users and one domain on a dynamic IP. The first user, "webadmin" can send and receive emails just fine through the server from my mail client.
Now I just added a new user, "scarleo", and it turns out I'm unable to send and receive emails with this account. If I log in (SSH) with scarleo I can use bash mail to send emails, works fine. scarleo can also receive emails from webadmin and can connect to Dovecot to read emails. However scarleo cannot send or receive to or from anyone outside the server from my mail client. I have restarted both Postfix and Dovecot after adding the user. Do I have to do something else to make this account work like webadmin's?
A few relevant lines from mail.log: (I've modded my real IP) Code: Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<scarleo>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<webadmin>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS Dec 7 17:45:16 homer postfix/smtpd[5915]: connect from bredband.comhem.se[96.136.112.229] .....
I have a problem with the mailserver that i have. I uses a tutorial to install a Fedora 13 ISPconfig server. But the problem that i have is that i can't receive mail at the user that i made.
Could it be the IMAP file is corrupt?I have set up mail server on Centos to receive via dovecot.One of my user accounts (A single account out of a hundred)cannot receive their mails.
My server already installed and works well, but I can't send or receive mail with Squirrelmail, the error that appears is: Server replied: 67 Can not execute command '/ usr / sbin / sendmail-t-i-fteste@gabinetedeengenharia.com '.
As per OpenNMS wiki documents, I configured everything for email notification of alarms. I am able to view notification under notifications, but I haven�t seen any mail alerts forwarded to recipient mail ID. Below are configuration files. Please review and suggest the required settings/actions. SMTP Server Details: SMTP Relay Server, OS: Linux
i also made the configuartion by opennms configuration material in opennms.org i edit the following conf file
I recently purchased a domain and I have setup what I believe are correct dns records from the domain companies control panel. I have the domain pointing to my server and that's working fine. I also have an MX record for my domain. Now, I can send emails from my email account just fine however I cannot receive any emails coming in to my account. Heres an example:
[dalton@int-interactive mail]$ echo "hello world" | sendmail -v dalton@int-interactive.com dalton@int-interactive.com... Connecting to [127.0.0.1] via relay... 220 int-interactive.com ESMTP Sendmail 8.13.8/8.13.8; Sun, 21 Aug 2011 14:45:16 -0400
Seems quite a lot out there are finding it simple enough getting Thunderbird/Davmail to work, yet I've been at it for days now and still no luck. I've finally given up altogether with Evolution last week, as it seems from weeks of reading and trying, there just isn't a solution for it to work with Exchange Server mail. Yes I tried brutus and its web sites are down so to get additions such as Brutus Keyring is impossible. (its all a long story for another day)Evolution is now uninstalled and in the bin.So now Im into the 5th day trying with Davmail and Thunderbird to get emails from my company mail exchange server.I am sure Im going to have better luck with Thunderbird from what Ive read so far, but it still eludes me how to set it up with Devmail and the information Ive found so far is not very clear. I am sure I am just missing the most simplest step somewhere along the line.
Can someone please post a detailed instruction on how to configure both Thunderbird and Devmail to work together and also how to test if Davmails is working?I can easily access my company emails via OWA with URl... from my home internet, so no issue there.From the efforts of trying to get Evol to work where it came up with the error. "Evolution connector is not compatible with Exchange 5.5", I assume our company server is running an MS exchange server version 2003 or older.
It is the strangest thing. I can not receive emails on this server after it has been up for an hour. I noticed that everytime and email is received that a sshd opens but never closes. Causeing a memory issue that I dont know how to fix. Also the mailq grows and grows. Mostly with email stating the recipient and send are both [URL].. also postmaster@mail.jmchd.com shows mail system configuration error. I have to restart the server every 30 minutes so users can get and send emails. This is horrible because for every 5 minutes out of the hour emails are bouncing.i have looked through them but I know not what I am looking at.
PS. I was thrown into the position and have limited knowledge. I am used to a GUI.
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command)) Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
