nstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...
I do not know why I could send email outside but not receive. I use relay to my ISP that port 25 is blocked by my ISP. What can I doing with configuration when it should be works to receive mail? Okay, I have sent a test e-mail between localhost and it works. I can send from mailserver to my gmail without problem. So why I cannot receive email from gmail?
View 2 Replies View RelatedI set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
i installed a new server ubuntu server 9.10 with lamp, etc.
after which i followed the following tutorial to setup
Postfix, DoveCot, Squirell
[URL]
It was working fine till here. After which i installed the spamassain which also got configured perfectly.
I can send only 1 or 2 mails after which i get error
here is my confid file of postfix
Quote:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code]....
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedMy server already installed and works well, but I can't send or receive mail with Squirrelmail, the error that appears is: Server replied: 67 Can not execute command '/ usr / sbin / sendmail-t-i-fteste@gabinetedeengenharia.com '.
View 5 Replies View RelatedI recently purchased a domain and I have setup what I believe are correct dns records from the domain companies control panel. I have the domain pointing to my server and that's working fine. I also have an MX record for my domain. Now, I can send emails from my email account just fine however I cannot receive any emails coming in to my account. Heres an example:
[dalton@int-interactive mail]$ echo "hello world" | sendmail -v dalton@int-interactive.com
dalton@int-interactive.com... Connecting to [127.0.0.1] via relay...
220 int-interactive.com ESMTP Sendmail 8.13.8/8.13.8; Sun, 21 Aug 2011 14:45:16 -0400
[code]...
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
I have a very basic install of dovecot and postfix on the latest version of Ubuntu server. This is an internal only email server with internal only DNS. I can send email via clients and check said emails via the command line when logged in as the appropriate user. I cannot for the life of me check said emails via SquirrelMail on the server nor using IMAP clients. I have no idea where to look and I can't find a basic tutorial for the life of me. Where should I start?
View 9 Replies View Relatedso I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...
I'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.
However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only.I had follow this how-to http://www.linuxmail.info/squirrelma...o-in-centos-5/ and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works.I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, i install VM player on it and run CentOS inside the VM Player.I want to do testing on Windows 7 side by installing Thunderbird email client program, i want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How ?
Do i have to do any other configuration on CentOS ? any DNS ? port number for IMAP,POP3 or SMTP ?
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I have configured Postfix on a Ubuntu 8.04 box using this tutorial:I can send emails but I cannot receive any email because of a "bad recipient address syntax:"The log from /var/log/mail.info says this:
Code:
Apr 25 14:46:06 360romania postfix/pickup[31716]: 74A682190661: uid=0 from=<root>
Apr 25 14:46:06 360romania postfix/cleanup[32402]: 74A682190661: message-
[code]...
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
I am would like to configure postfix to send and receive email across Ethernet (just for now). I have two machines with postfix installed both using Ubuntu 10.04 directly connected with an ethernet cable. I have successfully configured a machine to send email to gmail, however i have been unsuccessful in having these machines send email back and forth. I have been interested in setting up a little mail server at home and have just been trying some simple projects with postfix to start with. At this moment i am using ip addresses and am not concerned with using a dns server
machine A: has a fixed ip of 10.137.202.1, hostname = mail.me.com,
machine B: has a fixed ip of 10.137.202.20, hostname = mail.ubuntu.com
in the /etc/hosts file I map each hostname to ip address receptively (not sure if a good idea, but at this point I have been trying everything)
So I will execute from Machine B
echo "Here is a message" | mail -s 'Hello' cmd@[10.137.202.1]
I currently get from mail.log timed out while receiving the initial server greeting. I get from mail.err valid hostname or network address required in server description #[10.137.202.1]. Obviously when I run the mail command from cmd user i do not receive anything. I can receive mail from myself if from machine A, I sent an email using the command above. I would just like to send email from machine B and receive it on machine A via direct Ethernet connection. I have been through postfix documentation and have also read the postfix definitive guide and have had no luck.
Here is a recent main.cf as I have tried getting this to work (this is for machine A however, similar for B)
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
myorigin = /etc/mailname .....
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I've set up both Postfix and Dovecot on my server. I can currently send mail via Outlook to Postfix over Port 587 (rather than Port 25), and receive mail from Dovecot on Outlook. However, the only mails I am able to receive are those originated from within the server itself. If I attempt to send an e-mail to the address my Outlook listens to, the mail will never reach my Outlook. In other words, no one on the Internet is able to send mail to me.
Can someone tell me:
1) If setting Postfix to listen over Port 587 for my Outlook to send mail outwards is preventing me to have Postfix to listen to mails coming from the Internet? Would I have to turn on both Ports 25 and 587 in /etc/postfix/master.cf?
2) I have configured my Postfix to use saslauthd by authenticating those who are on /etc/passwd. This means I can enter my Linux account details into Outlook in order to connect and download messages. However, does this mean other MTA servers on the Internet who doesn't know my account details are unable to authenticate with my Postfix server and send mails to it?
I am using postfix in conjunction with the ispCP Control Panel. Here's some of the recent entries in maillog, when I try to send an email from my gmail address to an email address on this server (I underlined the email addresses).
Code:
2010-06-26T17:57:43.581654-04:00 li136-183 postfix/smtpd[30721]: fatal: No server certs available. TLS can't be enabled
2010-06-26T17:57:43.838633-04:00 li136-183 postfix/smtpd[30710]: warning: connect to 127.0.0.1:12525: Connection refused
2010-06-26T17:57:43.838677-04:00 li136-183 postfix/smtpd[30710]: warning: problem talking to server 127.0.0.1:12525: Connection refused .....
I was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
I used this tutorial to setup to setup iSpconfig postfix courier: [URL] but i cannot send or receive email:
[Code]....
Basically when i create users in ISPconfig, something goes wrong, mysql is running and i have postfix-mysql installed and running too.
[Code]...
I just set up a new email server on Debian Lenny. It's Postfix for MTA and Dovecot for IMAPS server. I use Dovecot for authentication. I have two UNIX users on the system (except root), one was added before the installation of Postfix and Dovecot. I'm not doing any virtual things, just plain UNIX users and one domain on a dynamic IP. The first user, "webadmin" can send and receive emails just fine through the server from my mail client.
Now I just added a new user, "scarleo", and it turns out I'm unable to send and receive emails with this account. If I log in (SSH) with scarleo I can use bash mail to send emails, works fine. scarleo can also receive emails from webadmin and can connect to Dovecot to read emails. However scarleo cannot send or receive to or from anyone outside the server from my mail client. I have restarted both Postfix and Dovecot after adding the user. Do I have to do something else to make this account work like webadmin's?
A few relevant lines from mail.log: (I've modded my real IP)
Code:
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<scarleo>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<webadmin>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:45:16 homer postfix/smtpd[5915]: connect from bredband.comhem.se[96.136.112.229] .....
I have Linux mail server, It always encounter this problem, when i shut down or restart the server. You cannot receive mail but you can send..i use the following services:
iptables -F
service iptables restart
service sendmail restart
[code]...
Im running Ubuntu server 10.04 lts
Im trying to get postfix to receive mail from one address and pipe it to a PHP file for a help desk software called Trellis Desk.
They recommended that I use Cpanel but its not free and my boss is not willing to pay for it. I need a free solution.
I know my way around Linux but Im no professional
Every time I try to send a message with SquirrelMail, I get:
Code:
Message not sent. Server replied: Syntax error in parameters or arguments 501 5.1.7 Bad sender address syntax
Alright guys, I've looked over every thread regarding this issue on this forum, and many others; yet I cannot find out why my mail is being bounced without error from my external gmail account.From what I've seen, you guys need to start off by seeing my postconf -n
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]...
Using Ubuntu 11 and have just managed to get wireless working. It used to be a wired connection but when I moved needed to go wireless. Now for some reason the send/receive icon is faded and I can send or receive messages.
View 2 Replies View RelatedIn my continuing quest to live without X most of the time, I am trying to set up fetchmail and Mutt to get and send mail. I only want to be able to send and receive text based mail, and so far I am running into trouble with what I think should be pretty simple. For receiving my mail, I believe I only need to create a .fetchmailrc file in my home directory with the entry:
Code: poll [URL] protocol pop3 username "myusername" password "mypassword" But I get:
2 messages for myusername at mail.myISP.com (7965 octets).
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from wetumpka@mail.btopenworld.com and delivering to SMTP host localhost
reading message myusername@pop-smtp.ISP.mail.fy5.b.yahoo.com:1 of 2 (2734 octets)fetchmail: Query status=10 (SMTP)
It appears to me that it is finding mail but does not know where to deliver it and is refused a connection to my machine. Also, I cannot figure out how to set up my SMTP for my ISP in Mutt to send mail. Can someone point me to a simple tutuorial on how to do these things. I really only want to do what you would with Thunderbird, but from the command line.
I want to configure a single mail server to send and receive mail from multiple sub domains of my domain. I've already installed Postfix/Dovecot and it is perfectly working for mydomain.com. And also installed roundcube for Web Mail. Can I further customize this setup to process mail to sub domains? ex- someone@subdomain1.mydomain.com, someone@subdomain2.mydomain.com, someone2@subdomain1.mydomain.com (someone@subdomain1.mydomain.com and someone@subdomain2.mydomain.com are 2 separate users. they should be able to log on to web interface separately)
Currently i use system account names as email user names. (ex - systemusername@mydomain.com). The only MX record in my domain DNS pointed to current server (mailhost.mydomain.com). I read about postfix virtual domains. but couldnt figure out how to use it to achive my target. I do not need configuration details. Just explain me the way to do it. I can do the rest my self.
i'm using fedora 12 and i wanna send mail using command $mail actually i tried to send mail to my gmail , yahoo ,and hotmail emails but i didn't receive the mail so i expect that i should have some configuration on my host before sending mai
View 2 Replies View Related