i have a website, there is a button that u click fill out a form and sends u a link to download a trial version of our software, the message gets sent with out html.. i copied a sample below (edited out some personal info)
Code:
Content-type: text/html; charset=iso-8859-1
From: ******.com>
[code]...
I'm new here and I'm sure this question has been thrown around a lot but I just couldn't find a solution. I have a networking website I've setup and we need to send notification mails to our members depending on activity related to their profiles(messages, comments etc).We are hosting the site on Centos5.6 with VirtualMin and are using Postfix as our MTA. We also use google apps for email on the site. Heres the problem, the mails go through for some gmail users but more often than not, they end up in gmail,hotmail and yahoo spam.We've setup the appropriate SPF codes on the server, DKIM and rDNS works fine.v=spf1 ip4:xx.xx.xx.xx a mx include:_spf.google.com ~all Below is a sample email that goes directly into gmail spam. I've replaced the actual values with dummy text (Ip, Domain etc)
Delivered-To: my.email@gmail.com
Received: by 10.143.165.5 with SMTP id s5cs223598wfo;
Fri, 15 Apr 2011 08:38:22 -0700 (PDT)
[code]...
The scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
[Code]....
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)
View 13 Replies View Relatedtelnet localhost 25 when rcpt to:mike@test.com ,report error: 451 4.3.0 <lisi@test.com>:Temporary lookup failure
View 1 Replies View RelatedI'm having a problem with Postfix sending email. To be more specific, Postfix sends mail perfect but when my web server running webmail (RoundCube) connects to my mail server to send email, it fails & there is nothing in the logs that explain to me why:
Code:
Jan 8 11:53:02 mail dovecot: imap-login: Login: user=<carlos>, method=PLAIN, rip=192.168.0.201, lip=192.168.0.200, mpid=2161, TLS
Jan 8 11:53:02 mail postfix/smtpd[2162]: connect from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: setting up TLS connection from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: Anonymous TLS connection established from
[Code]...
I have recently installed the ISPCP web hosting control panel. It seems that after a while running and testing I can receive but I cannot send e-mail. basically I get an error which goes
Code:
postfix/smtp[5939]: connect to alt1.gmail-smtp-in.l.google.com[72.14.213.27]:25: Connection timed out
I have, in the recent past, been able to send e-mail so I know that there is something that has gone wrong with my configuration, which I cannot. I post here my master.cf and my main.cf files as well as the mail.log file and the mail.warn....
Ubuntu Server 8.04 LTS 64x
spCP 1.0.4 OMEGA
build: 20100228
Codename: Priamos
Alright guys, I've looked over every thread regarding this issue on this forum, and many others; yet I cannot find out why my mail is being bounced without error from my external gmail account.From what I've seen, you guys need to start off by seeing my postconf -n
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]...
i am trying to set up a mail server that will support users in a LAN in my school. I am using postfix on a Mandrakelinux distro.
I can send mail when I am root to the other user on my (same) machine both when in command line (mail command) and on Graphical mail client (Kmail ) but the user (sam) cannot send mail to the root account on either interfaces.
I followed the postfix configuration settings on John_Wiley_-_Redhat_Linux_Networking_and_System_Administration_3rd_Edition.
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
We are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
I want to configure Postfix mail server to send bulk mails to others domains only but they could not send to me. steps to configure Postfix to send bulk mails and what packages required for it.
View 2 Replies View RelatedI recently had the need to relay SMTP mail through our organizations hosted MS Exchange server. I had to do a little troubleshooting, so I wrote a concise summary of the procedure I followed.
View 1 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View Relatedi have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
my server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code].....
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedI set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
I've set up both Postfix and Dovecot on my server. I can currently send mail via Outlook to Postfix over Port 587 (rather than Port 25), and receive mail from Dovecot on Outlook. However, the only mails I am able to receive are those originated from within the server itself. If I attempt to send an e-mail to the address my Outlook listens to, the mail will never reach my Outlook. In other words, no one on the Internet is able to send mail to me.
Can someone tell me:
1) If setting Postfix to listen over Port 587 for my Outlook to send mail outwards is preventing me to have Postfix to listen to mails coming from the Internet? Would I have to turn on both Ports 25 and 587 in /etc/postfix/master.cf?
2) I have configured my Postfix to use saslauthd by authenticating those who are on /etc/passwd. This means I can enter my Linux account details into Outlook in order to connect and download messages. However, does this mean other MTA servers on the Internet who doesn't know my account details are unable to authenticate with my Postfix server and send mails to it?
My postfix server will not allow me to send mail except if I am on the server it self.My postfix conf is as follows.
server:~ # postconf -n
alias_maps = hash:/etc/aliases
biff = no
[code]...
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
recently i configure postfix on my fedora core 9 system i want to send mail from one user to another till now i did not create any user, i just configure the main,cf file with the help of some link i found on internet
here is my main.cf file
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code]...
i dont know what i should write about my main.cf file so i post the whole file here.
so can anyone tell me is that the configuration is correct and and how do i create new user to my domain name and how can i send and receive mails from one user to another user using postfix
Trying to write a small php program to send emails using a form. I have collected all the information in php variables and I can send the mails just fine. But I need some neat and clean formatting for the mail that is received and hence thought html tables would be nice. But all the html tags are received as plain text and not html though I have mentioned in headers content-type to be html. Any links? If anyone can put some light on it? I thought that html tags would just work fine without much issue. I have tried same with asp and it worked.
PS: I am no programmer. Just trying my hands out on some php.
Edit: I am using a php mailer class from php classes to send mails. I need some way to use an external smtp server for sending mails. I have seen pear but I do not want to use pear. It is not available on the server I am testing and it is not possible for me to install it. I do not have access to install pear and can not ask to install it.
I am trying to make my elastix voip server to send and receive e-mails. It has built in Postfix mail server, and i tried to configure it.I am not sure about some parameters, such as domain and hostname.Either way, i will attach my config file and the errors that i get from log and mail queue as i get them from webmin.
View 7 Replies View RelatedI'm on Ubuntu 10.04 and using Postfix 2.7 with Dovecot's SASL. The issue is when sending e-mail it takes a bit of time to send. LIke for it to get connected it takes around 15.20 seconds. How can I reduce this delay so it can be sent faster?
View 2 Replies View RelatedI have spent the last 24 hours searching the internet for an issue to resolve my problem. I have tried the verious solutions posted by people and followed endless amounts of tutorials
In the end i followed [URL] line by line
This allowed me to recieve email fine, but only send email locally.
I either get a "Relay access denied" message, or as of last night is is now "Recipient Address Rejected"
Below is a link to my Main.cf file
[URL]
Let me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25
ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
nstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...