Server :: (OpenSuse 11.2) Installation And Configuration Of Web / Mail Server?
Feb 16, 2010
I am hoping to find some much needed help here. I have been to various other sites and am beginning to think that I am not meant to have a server of my own.
I was told that OpenSuSE was good for beginners. So far, I am wondering.I am trying to set up a home network ( 2 laptops, 1 desktop. The laptops are wireless )
I'd like to set up a web server to run a personal webpage or two and maybe a forum, shoutcast server and IRC at some point down the road after I figure out the first two.
I found a guide, but it was for 64 bit and wanted me to install ISPConfig 3 ( Which, obviously I don't need )
I would like some basic, beginner help on installation, configuration and whatnot on setting up a web-server and mail server.
Yes. I have a static IP ( leasing an IP block from my ISP ). Yes, they allow me a web-server and mail server ( I had to get the IP block to do so ) and I have my own domain name to use.
On the various attempts, I managed to get apache working. ( When I visit my domain name, it says "IT WORKS!" which is nice and all, but I am use to using Cpanel and have no clue how to setup / edit a website outside of a panel ( or even FTP )
I think I got the mail server installed, but again ( as with the web server ) have no clue how to setup / configure and use it.
I either am using the wrong search words for help or asking incorrectly or something. This is my final stop. I am at the point of just forgetting it, chalking it up to a lost cause.
I do hope someone here is willing to be patient with me and help me through it all. I will even give link backs and Kudos to this site if it all works out.
View 1 Replies
ADVERTISEMENT
Feb 22, 2011
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
Aug 27, 2010
I just configured my system to be a mail server after following this howto URL...Normally before the configuration i use a huawei E1550 to browse on it but now it no longer works.It connects to the internet but refuses to browse.I cannot open any webapge or site for now.I suspect it has to do with the shorewall configuration i must have changed that has caused this.
View 1 Replies
View Related
Aug 13, 2010
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
View 9 Replies
View Related
Jan 21, 2011
Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
View 1 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
View 6 Replies
View Related
Nov 3, 2010
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies
View Related
Jan 5, 2011
I would like to run a mailing daemon on my system that would receive incoming mail and forwards it to my Gmail account. I have no experience in mail services and forwarding mail at all. where to start reading and/or look for clues?
View 3 Replies
View Related
Jan 12, 2011
i need to install a mail server with the following requirements: smtp, imap, web administration interface (users management to be done by a non-specialist) and ... to be easy enough to install/implement on debian (this is one time deal for me ...)
i used until now Xmail, phpxmail and nocc, very easy to install and it was working flawlessly, but unfortunately nocc is a too poor webmail client be cause is based only on pop3 literally the requirement is that on the web[client] mails sent must be saved and from what i see on webmail that only can be done with imap and (this is the big problem) Xmail does not support imap so i cannot install a good webmail client
View 1 Replies
View Related
Jun 21, 2010
I am trying to configure the fetchmail and I have this line on the configuration file
poll other.mail.server interval 4
user "otherusername" there with password "otherpasswd"
How I do it? Is "mail.server" my isp server? and after configuration how do I fetch mail?
View 1 Replies
View Related
Mar 10, 2011
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies
View Related
Mar 20, 2011
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
View 14 Replies
View Related
Apr 16, 2010
I would like to discuss setting up a mail server and its implications and alternatives. First, let us see if I have understood this correctly: A mail server consists of many different components. First, a server to listen to any mail inbound for a specific domain (say postfix), and then a POP3/IMAP server (say dovecot). Then, I should somehow configure the rules by which all mail is forwarded to their respective owners. This should be fairly simple by using debians package managers and dselect or whatever program it is that sets up right packages by use cases at the install.
But now lets assume a more complicated environment, where there are multiple users with different domains and needs. First, we need to send mail to ourselves from webapps for instance for backup purposes. So let's say we have a domain called domain.com setup, and we want to send mail to backup@domain.com. Unfortunately, some configuration issue makes the application get confused, because it is trying to send mail to itself, but doesn't quite understand what it should do. How can this problem can be solved?
Second, how could I configure different domains with different rules. For instance, if I want one domain to have a catch-all account, where random email sent to erroneous accounts is captured? Or if I want to create accounts which are not based on actual Debian accounts, but instead just random usernames (say, danny@domain.com, mike@domain.com, support@domain.com etc.)?
Finally, which are the best web-guis for doing such configuration? What if the customer wants to himself add accounts? I cannot require him to edit text files - especially if he can thus break the whole configuration for other customers as well.. postfix-admin is one, but it is quite crude-looking. Is there something which integrates both postfix, apache and dovecot configuration? How about Webmin?
View 2 Replies
View Related
Apr 14, 2010
Being a New user of Red Hat Ent. Linux 5.1, I need Step by step configuration documents of FTP/DNS/MAIL/Appache/SAMBA individually and individual Test of each configuration after configuration. I had gone thru' RHEL Documents but there is no step by step configuration
View 2 Replies
View Related
Feb 8, 2010
Could anyone point me to some simple articles that explain what email encryption is and how to set up a mail server (e.g. Exim) that can send secure emails? I know nothing about networks, mail servers, encryption, etc., but I have to be an expert on it before I walk into work tomorrow morning.
View 14 Replies
View Related
Jun 20, 2010
I was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies
View Related
Nov 28, 2010
Where to find Mail Server Configuration Howto for Dummies?
Reguirements:
Autoreply is supported?
User Accounts and other configs in MySQL database..
View 9 Replies
View Related
Jul 19, 2010
I have an OpenSuse 11.2 system that is running 2 BBS systems independently, both of which are capable of receiving smtp mail on prot 25. What I would like to do is set up Postfix on the OpenSuse OS to receive all mail for both those domains and then send the relevant mail to the correct BBS. I would therefore have Postfix listening on Port 25 External and the 2 BBS applications listening on different ports on the localhost address. At least that is the plan.
how to do this. I want to do it and still make sure Postfix is secure and not accidentally open up any nasty relay holes etc etc.
View 2 Replies
View Related
Aug 24, 2009
I'm having an issue with an e-mail server (with an IP of 10.10.0.1) which is behind NAT (Cisco ASA) which in turn of course has it's own external IP (let's say - IP 10.10.0.100). Both IPs are public.Now, if i wanted to set up a correct RDNS configuration for my domain, what should be the IP address entry for the PTR record in this case?
I know this is strictly network configuration related question (not Linux, or CentOS for that matter), but I wouldn't be asking if I didn't get a few bouncing e-mails every once in a while (i.e. NDRs) with messages like: You do not have permission to send to this recipient. For assistance, contact your system administrator.
[Code]...
View 1 Replies
View Related
Aug 20, 2010
I was using an email server from Icewarp, Merak Mail server V8.0.3 with a keygen for total full free use... I liked this server package... as everything is in there I need and it is controllable from a single window. Now I am planning to move to Linux... They have a Linux version, but not stable and expensive. Is there any thing almost free/less expensive (Specially they need yearly payment for upgrade of even the anti virus and anti spam)?
I need a almost same thing (except of the ftp and VoIP) like Merak (because that I really liked for ease of administration) in Linux? Like a Qmail with real strong Anti Virus and Anti Spam, with unlimited domain and user+autoresponder, mailing list, etc all but controllable from one single GUI?
View 1 Replies
View Related
Apr 2, 2010
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
View 4 Replies
View Related
Dec 29, 2010
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
View 1 Replies
View Related
Aug 25, 2010
Through yast2 I went to network services-->Mail server and took the standard option. My connection type is Permanent, filled in the outgoing server information and got to the incoming mail screen.
I told it to accept remote SMTP connections, open a port in the firewall and bypassed the downloading section since I just want to directly receive mail (I did however tell it I wanted a daemon to fetchmail). Told it to forward root's mail to me and a delivery mod of Directly. And finished.
The system sends mail out but I can't seem to receive any. What did I do wrong or what else do I need to do?
View 1 Replies
View Related
Sep 23, 2010
having mail server setup as my topic for my Diploma Final Project.I still confusing choosing which OS to setup, besides i prefer more GUI based configuration rather that command-based.
I did research through the internet about Postfix and Sendmail, also did i need a DNS for my server ? i need a guide.
Also, is it possible to have own domain ? like user@example.com....i mean to have own email address setup.
I will use my laptop to setup the mail server, which is inside Local Area Network(LAN) without going to internet.I hope to use another laptop/pc to do testing on sending and retrieving mail in the network.
View 6 Replies
View Related
May 5, 2011
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
View 3 Replies
View Related
Feb 10, 2010
My postfix server will not allow me to send mail except if I am on the server it self.My postfix conf is as follows.
server:~ # postconf -n
alias_maps = hash:/etc/aliases
biff = no
[code]...
View 5 Replies
View Related
May 31, 2010
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
View 4 Replies
View Related
Feb 25, 2010
I am trying to install Mozilla Thunderbird email client. When I configure this program, it defaults to IMAP4-type incoming mail server (Port 143) instead of POP3 (Port 110) which my ISP uses. I did not see POP3 anywhere in the available dialog boxes. Is there any way to get Thunderbird to use POP3 in opensuse 11.2 Gnome Edition?
View 3 Replies
View Related
Feb 15, 2010
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
View 2 Replies
View Related
