OpenSUSE :: Receiving Mail Through A "standard" Mail Server Setup?
Aug 25, 2010
Through yast2 I went to network services-->Mail server and took the standard option. My connection type is Permanent, filled in the outgoing server information and got to the incoming mail screen.
I told it to accept remote SMTP connections, open a port in the firewall and bypassed the downloading section since I just want to directly receive mail (I did however tell it I wanted a daemon to fetchmail). Told it to forward root's mail to me and a delivery mod of Directly. And finished.
The system sends mail out but I can't seem to receive any. What did I do wrong or what else do I need to do?
View 1 Replies
ADVERTISEMENT
Oct 15, 2009
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies
View Related
Sep 6, 2010
I do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...
You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..
View 2 Replies
View Related
Jul 1, 2009
I have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).
View 2 Replies
View Related
May 8, 2011
I am writing an script for sending emails with ssmtp email client in an appropriate form.I want to know how can I check mail server that I want to send mail to it if it exist and ready to receive email or if not log an error.
View 3 Replies
View Related
May 5, 2011
I'm new to openSuse after installing it on my work machine as a replacement for Ubuntu.
I have Evolution mail up and running and all is well other than I am having a problem when receiving mail.
When I first start Evolution, it checks and downloads my new mail without any issues however whilst it is running it won't download any mail, either automatically or manually via the Send & Receive button.
It appears to be checking my accounts (the progress box pops up briefly) and is not reporting any errors, just not downloading until I close Evolution and then restart.
Sending is working perfectly.
I must admit that I "imported" my old mail in a bit of a cack-handed fashion and did have to uninstall/re-install Evolution - I noticed that it uninstalled a few extra packages however when I reinstalled, it only selected the main Evolution packages.
The fact that it is receiving on Evolution start-up I think rules out my settings being incorrect.
View 6 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
View 6 Replies
View Related
Nov 3, 2010
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies
View Related
Feb 4, 2010
I've setup Exim4 as an MTA on my VM which has a static IP. I've pointed the MX records both idential to this static IP. I can send out via command line on the VM using Exim commands and receive the mail in my home account no problem, it also displays the correct from address ie rich@mydomain.co.uk
So I'm not sure what's going on with receiving the mail. If I send a mail from my home email to rich@mydomain.co.uk (not real address), I don't get a bounce or anything, it just goes out never to be seen again.
View 3 Replies
View Related
Mar 10, 2011
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies
View Related
Feb 22, 2011
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies
View Related
Mar 20, 2011
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
View 14 Replies
View Related
Jun 1, 2011
I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
View 2 Replies
View Related
Aug 3, 2011
Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
ISP supplied CISCO router
Draytek VigorPro 5510 UTM
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?
View 2 Replies
View Related
Jan 9, 2011
I am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...
View 14 Replies
View Related
Feb 15, 2010
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies
View Related
Jul 27, 2010
I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
View 2 Replies
View Related
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
View 4 Replies
View Related
Jun 8, 2011
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies
View Related
Aug 6, 2010
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
View 2 Replies
View Related
Nov 19, 2010
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
View 9 Replies
View Related
Oct 12, 2010
I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
View 3 Replies
View Related
Mar 30, 2011
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
View 1 Replies
View Related
Apr 22, 2010
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
View 5 Replies
View Related
Apr 21, 2010
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies
View Related
Mar 1, 2011
Running Ubuntu 10.4 with happiness and Evolution both for 4 months and always have been able to 'receive' mail by pushing button listed as such; but NOW it is all greyed out. I cannot find or discover how to make it come back 'alive' , so to speak. I have not changed anything that I know of to cause this.
View 3 Replies
View Related
Aug 22, 2011
I would like to set up a mail and instant messaging server running on squeeze.It will be running on a 1ghz celeron (pentium 3 era) with 1gb ram and 10gb hdd (I'm assuming these are high enough specs) It will have less than 10 accounts and probably no webserver (not sure if good idea). I am also unsure of what IM protocols would be best for this. I would prefer to do all this from the command line if possible (so long as it's not too hard) and preferably from a remote machine (so SSH?) I prefer IMAP if possible but pop3 and smtp are also fine. I would also like to be able to connect remotely with encryption (not a big requirement -just a nice feature)
View 4 Replies
View Related
Oct 2, 2009
I want to setup a mail sever for my network.But I don't know how.
View 5 Replies
View Related
Apr 23, 2011
Using Thunderbird 3.1.8. How do I sync the local sent mail folder with the sent mail folder on the server so I have a copy of the sent email
View 1 Replies
View Related
May 31, 2010
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
View 6 Replies
View Related
