Being a New user of Red Hat Ent. Linux 5.1, I need Step by step configuration documents of FTP/DNS/MAIL/Appache/SAMBA individually and individual Test of each configuration after configuration. I had gone thru' RHEL Documents but there is no step by step configuration
View 2 RepliesThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I am hoping to find some much needed help here. I have been to various other sites and am beginning to think that I am not meant to have a server of my own.
I was told that OpenSuSE was good for beginners. So far, I am wondering.I am trying to set up a home network ( 2 laptops, 1 desktop. The laptops are wireless )
I'd like to set up a web server to run a personal webpage or two and maybe a forum, shoutcast server and IRC at some point down the road after I figure out the first two.
I found a guide, but it was for 64 bit and wanted me to install ISPConfig 3 ( Which, obviously I don't need )
I would like some basic, beginner help on installation, configuration and whatnot on setting up a web-server and mail server.
Yes. I have a static IP ( leasing an IP block from my ISP ). Yes, they allow me a web-server and mail server ( I had to get the IP block to do so ) and I have my own domain name to use.
On the various attempts, I managed to get apache working. ( When I visit my domain name, it says "IT WORKS!" which is nice and all, but I am use to using Cpanel and have no clue how to setup / edit a website outside of a panel ( or even FTP )
I think I got the mail server installed, but again ( as with the web server ) have no clue how to setup / configure and use it.
I either am using the wrong search words for help or asking incorrectly or something. This is my final stop. I am at the point of just forgetting it, chalking it up to a lost cause.
I do hope someone here is willing to be patient with me and help me through it all. I will even give link backs and Kudos to this site if it all works out.
I would like to run a mailing daemon on my system that would receive incoming mail and forwards it to my Gmail account. I have no experience in mail services and forwarding mail at all. where to start reading and/or look for clues?
View 3 Replies View Relatedi need to install a mail server with the following requirements: smtp, imap, web administration interface (users management to be done by a non-specialist) and ... to be easy enough to install/implement on debian (this is one time deal for me ...)
i used until now Xmail, phpxmail and nocc, very easy to install and it was working flawlessly, but unfortunately nocc is a too poor webmail client be cause is based only on pop3 literally the requirement is that on the web[client] mails sent must be saved and from what i see on webmail that only can be done with imap and (this is the big problem) Xmail does not support imap so i cannot install a good webmail client
I am trying to configure the fetchmail and I have this line on the configuration file
poll other.mail.server interval 4
user "otherusername" there with password "otherpasswd"
How I do it? Is "mail.server" my isp server? and after configuration how do I fetch mail?
I would like to discuss setting up a mail server and its implications and alternatives. First, let us see if I have understood this correctly: A mail server consists of many different components. First, a server to listen to any mail inbound for a specific domain (say postfix), and then a POP3/IMAP server (say dovecot). Then, I should somehow configure the rules by which all mail is forwarded to their respective owners. This should be fairly simple by using debians package managers and dselect or whatever program it is that sets up right packages by use cases at the install.
But now lets assume a more complicated environment, where there are multiple users with different domains and needs. First, we need to send mail to ourselves from webapps for instance for backup purposes. So let's say we have a domain called domain.com setup, and we want to send mail to backup@domain.com. Unfortunately, some configuration issue makes the application get confused, because it is trying to send mail to itself, but doesn't quite understand what it should do. How can this problem can be solved?
Second, how could I configure different domains with different rules. For instance, if I want one domain to have a catch-all account, where random email sent to erroneous accounts is captured? Or if I want to create accounts which are not based on actual Debian accounts, but instead just random usernames (say, danny@domain.com, mike@domain.com, support@domain.com etc.)?
Finally, which are the best web-guis for doing such configuration? What if the customer wants to himself add accounts? I cannot require him to edit text files - especially if he can thus break the whole configuration for other customers as well.. postfix-admin is one, but it is quite crude-looking. Is there something which integrates both postfix, apache and dovecot configuration? How about Webmin?
Could anyone point me to some simple articles that explain what email encryption is and how to set up a mail server (e.g. Exim) that can send secure emails? I know nothing about networks, mail servers, encryption, etc., but I have to be an expert on it before I walk into work tomorrow morning.
View 14 Replies View RelatedI was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies View RelatedWhere to find Mail Server Configuration Howto for Dummies?
Reguirements:
Autoreply is supported?
User Accounts and other configs in MySQL database..
I have an OpenSuse 11.2 system that is running 2 BBS systems independently, both of which are capable of receiving smtp mail on prot 25. What I would like to do is set up Postfix on the OpenSuse OS to receive all mail for both those domains and then send the relevant mail to the correct BBS. I would therefore have Postfix listening on Port 25 External and the 2 BBS applications listening on different ports on the localhost address. At least that is the plan.
how to do this. I want to do it and still make sure Postfix is secure and not accidentally open up any nasty relay holes etc etc.
I'm having an issue with an e-mail server (with an IP of 10.10.0.1) which is behind NAT (Cisco ASA) which in turn of course has it's own external IP (let's say - IP 10.10.0.100). Both IPs are public.Now, if i wanted to set up a correct RDNS configuration for my domain, what should be the IP address entry for the PTR record in this case?
I know this is strictly network configuration related question (not Linux, or CentOS for that matter), but I wouldn't be asking if I didn't get a few bouncing e-mails every once in a while (i.e. NDRs) with messages like: You do not have permission to send to this recipient. For assistance, contact your system administrator.
[Code]...
I am trying to configure samba server on my linux RHEL 5 box to windows 2000 NT boxes but getting the following error
Global parameter guest account found in service section!
[2010/07/16 16:01:13, 0] lib/util_sock.c826)
bind failed on port 139 socket_addr = 0.0.0.0.
Error = Address already in use
The problem I am facing is, with the Samba server configuration.I have configured Samba server with a folder shared between server and client machines. I have tried downloading data from the shared folder on the server to the client machine which is successfully downloaded, however I am not able to upload any data to the shared folder in the samba server.
View 4 Replies View RelatedI just configured my system to be a mail server after following this howto URL...Normally before the configuration i use a huawei E1550 to browse on it but now it no longer works.It connects to the internet but refuses to browse.I cannot open any webapge or site for now.I suspect it has to do with the shorewall configuration i must have changed that has caused this.
View 1 Replies View RelatedFollowing yesterday's and then today's upgrade of my Debian 8 32-bit system (among other things to samba 2:4.1.17+dfsg-2+deb8u2 (yesterday: ...deb8u1)) I cannot connect my Mint 17.3 laptop to the server anymore. Were there any changes to smb.conf regarding authentication or other aspects that might lead to this problem? I am enclosing part of my smb.conf. By the way - I also have trouble using ssh to connect to the Debian machine, such as the ssh-command taking "for ever" and then getting the message "Write failed: Broken pipe" when entering an ls-command on the command line.
H. Stoellinger
smb.conf:
[global]
workgroup = RAINERMUSIK
netbios name = hsdesk
server string = Samba Server hsdesk
[Code] ....
vi /etc/samba/smb.conf
[samba test]
comment = client
path = /opt/apps/deploy/websites
public = no
writable = yes
[Code]...
Using the bash shell script the above given samba configuration,the script should automatically add these above given entries in the /etc/samba/smb.conf.can any one help me how to edit the file add entries in the config file using shell script.
I am trying to configure samba for a stripped down file server. I am running debian with command line only. My problem is that I cannot unmask samba.
See below:
root@debian:/home/aaron# service samba status
● samba.service
Loaded: masked (/dev/null)
Active: inactive (dead)
I have tried "sudo systemctl unmask samba.service". I receive no errors however it does not actually unmask. I can't find anything online regarding a service stuck on masked status.
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View RelatedI have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedCan this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
I am setting up a web server and SElinux keeps stopping httpd/appache and making it fail. Everything works fine when SElinux is set to permisive, so I know it is SElinux causing the problem. I have all the apache/httpd items allowed in the SElinux bool and even added the line the troubleshooter told me to add but the problem still persists. Here is what SElinux puts out:
[Code].....
several times and it does nothing. I have all the permissions set to Apache as owner and group and allow execution on all the files.
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....