Server :: Disk Not Coming Up In VMWare Instance In SLES 10?
Mar 24, 2011
It seems that every time there is vmware client update a couple of my Linux servers always reboot and get stuck at booting up because linux can not start a drive. I end up having to boot off the server did, run install and then run a auto repair to get it to boot up. I tried narrowing the repair to just the file systems but that did not seem to fix it, it has to be a autorepair. So I am thinking that with the vmware client there must be some virtualized hardware address that has changed with the updated client but I am not sure how to check what it is when I get dumped out to what looks like run-level 3 command prompt
The performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler "/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
I have KDE 4.4 and Firefox 3.6. Whenever I click a link from a plasmoid widget, it tries to open Konqueror and another instance of Firefox. The page actually loads in the opened Firefox window, but the task bar shows an instance of Konqueror and another instance of Firefox, that keeps loading for a while then close. See image below:
I currently have setup the browser default application as "firefox". If I set this option to use the default application, it opens in Konqueror and I don't see additional windows in the task bar. If I change the option to "firefox %u", then it exhibit the same issue, but the process is much faster, so the loading windows don't stay for long in the task bar. Additionally, it opens the link on a new Firefox window and opens the page twice. Although Konqueror is not loaded, the bouncing icon next to the mouse pointer shows up and stay for a while.
I just installed SLES 11.2 X86_64 and have SMB Server started after adding 2 lines to smb.conf:1. NTMLv2 = Yes2. name resolve order = wins bcast host lmhostsThere are also 02 new DWORD lines I add to Win7 clientsHKEY_LOCAL_MACHINESystemCurrentControlSetServicesLanManWorkstationParameters 1.DomainCompatibilityMode = 12. DNSNameResolutionRequired = 0Of course a few number of modifications I made from Yast to enable SMB Server and Client, and bcast as well. Now I am able to join my Linux Domain without error at first reboot from win7, but it seems spending a long time about 30 secs for auth. even I test on a very fast network system, all with core quad 3GHZ CPU and 4GB DDR2I would like to mention here that before I made the above changes I did a lot of different modifications onto my win7 clients (I found many suggestions online), and all seems mess up and never work; Then I had to reinstall win7 from scratch and just add 02 lines as above, but it works.
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I am running Apache2 on Novell SLES 11. I am using Virtual Hosting for two sites. One site only has a single domain whereas the other site has two domains registered. surrounding my one virtual host with the two domains. I want anyone that point to [URL] gets redirected to [URL]. I am trying to do this for trending but not 100% on how to go about doing this. I've read about mod_rewrite but most of the information I've read about is about a single site running on Apache and not much around Virtual Hosting within Apache. I am currently using Server Alias within my vhost.conf file which allows either [URL] or [URL] to see the site but I really want to redirect [URL] to [URL].
Unable to run programs as su - (root) from command line. example: kfind or yast2error:cannot connect to X ServerAfter I exit as root, I am able to excute both commands successfully.I will not work as su -. Operating System: SLES 9 (using KDE).
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
i have uninstalled and reinstalled alsa and made sure its not muted, in pulse audio it displays sound is coming out when i play a song, but no sound is actually coming out.. i dont want to go back to windows, but if i cant get sound im going to have to
I'm having a consistent problem with instances on Amazon EC2, which a lot of searching including here has resulted in no solution.During boot I see the following message on the console (or "System Log" in the Amazon console):Code:Mounting local filesystems: mount: /dev/sdg already mounted or /apps busy(I'll append a extract from the full log below).Once I log into the instance, I can access the filesystem so it's mounted somehow but I can't figure out what's going on:
Code: # df -k /apps Filesystem 1K-blocks Used Available Use% Mounted on
Currently we use an iSCSI SAN as storage for several VMware ESXi servers. I am investigating the use of an NFS target on a Linux server for additional virtual machines. I am also open to the idea of using an alternative operating system (like OpenSolaris) if it will provide significant advantages.What Linux-based filesystem favours very large contiguous files (like VMware's disk images)? Alternatively, how have people found ZFS on OpenSolaris for this kind of workload?
I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?
i am trying to create an image of Slackware OS but vmware is not able to detect the disk. it gives me below error, "Unable to detect disks or volumes on the source machine. Make sure that the source is a supported linux distribution." can some one tell me what do i need to do to create the image.
Hey all, I need help here! Whenever I boot up Fedora 13 my computer just decides to stop doing things right before the graphical login screen comes up. The system starts up properly, but after the "local" program starts, it goes to the fedora-colored blue screen right before the login screen usually comes up. I can still bring up consoles with ctrl alt f1/f2 and switch the tty screens. Whenever I try to start the X server using the X or Xorg command, it echoes the usual stuff and then the screen goes black. After that, nothing happens. I can get out of X by using the classic ctrl alt backspace method.
I haven't checked any X logs other than Xorg.0.log, but I'll post the others for any special failures soon.
I don't know what to do, I know how to block and delete pretty much every other type of abuse. I run a server with 500+ shared hosting clients and reseller clients and it was just blocked because of email spam. I can keep on top of all other abuse (people trying to do dos attacks etc) but the one thing I can't get my head around is email spamming. how to stop people spamming emails from my server?
I have been running a server with an increasingly large md array and always been plagued with intermittent disk faults. For a long time, I've attributed those to either temperature or power glitches. I had just embarked on a quest to a) lower case and drive temperature. They were running between 43 and 47C, sometimes peaking at 52C, so I've added more case fan power and made sure the drive cage was in the flow (it has it's own fan, too). Also, I've upgraded my power supply and made very sure that all the connectors are good. The array currently is a RAID6 with 5 Seagate 1,5TB drives.
When everything seemed to be working fine, I looked at my SMART logs and found that two of my drives (both well over 14000 operating hours) were showing uncorrectible bad blocks. Since it's RAID6, I figured, I couldn't do much harm, ran a badblocks test on it, zeroed the blocks that were reported bad, figuring the drive defect management would remap them to a good part of the disk and zeroed the superblock. I then added it back to the pack and the resync started. At around 50%, a second drive decided to go and shortly thereafter a third. Now, with two out of five drives, RAID6 will fail. Fine. At least, no data will be written to it anymore, however, now I cannot reassemble the array anymore.
Whenever I try I get this: Code: mdadm --assemble --scan mdadm: /dev/md1 assembled from 2 drives and 2 spares - not enough to start the array
Which is not fine. I'm sure that three devices are fine (normally, a failed device would just rejoin the array, skipping most of the resync by way of the bitmap) so I should be able to reassemble the array with the two good ones and the one that failed last, then add the one that failed during the resync and finally re-add the original offender. However, I have no idea how to get them out of the "(S)" state.
I am struggling with some issues Apache-tomcat is running fine, and port:8080 is also LISTEN but when am tiring to access the tomcat web_page is not up ,why ?
I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
I am having problem with the root disk / fill up. So now that i have the disk information provided from SAN team Id 0:3, how would i do to add this device to / to increase space on Redhat Enterprise server 4?
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
I have install Redhat Linux server 5 on VMware machine.The installtion is successfully completed and i have given FQDN name to the system(redhatserver.test.com) with static ip address. I am able to ping the IP also. but when i tries to execute the "dig" or "nsllokup" command it gives the error"connection timeout, no servers could be reached"I have checked the resolv.conf also, its having following directive search test.com nameserver 192.168.10.1 (server ip)
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
