The performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).
View 1 RepliesIs there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
View 2 Replies View RelatedHow to make a usb disk on key bootable?
View 3 Replies View RelatedAnyone here knows the OpenSuse install CD runthrough? I am using DELL pc's, and remember installing Linux as being a few almost basic steps on my self assembled clone pc's in my youth. Now, over ten years later I want to redo that and return to my old playground. I am using after over 12 years administering MS stuff again applications running on unix (solaris) at my work. Its like homecoming but in a difficult way, I am brainwashed and not really into unix anymore. So... lets install linux again at home. Returning to my favorite Suse distribution in the old days (who knows why).
I went through the installation (Opensuse11) simple, standard to start with, so mainly next (ACPI disabled). Rebooted... and the pc finds no recognized bootable HDD. OK, well, try again, other HDD to be sure, results in the same. Set manually the root partition as active. No go, I feel as a newbie again. What happened to me in those last years? Tried to do it also with a fedora distri - same outcome. When plugging these HDD in another recent (DELL) pc, it also does not recognize the HDD as bootable. Both disks have been part of a system before and functioned; until I changed this system for this other purpose. Probably i am missing something basic??
what is the procedure to make a bootable disk from ISO images downloaded from Red Hat Enterprise site?
View 8 Replies View RelatedFor old machines, is this bootmanager plop floppy disk exists? [URL]
View 1 Replies View RelatedDoes anyone knows "How to recover a root password using bootable fedora Linux 11 disk?
View 1 Replies View RelatedShould the first bootable partition start from sector 1 on a hard disk? or Can it be created anywhere on the disk? I am using fdisk to create the bootable partition.
View 2 Replies View RelatedIs it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies View RelatedNothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
Move centos to another hard disk?
My box is centos 5.4 x86 on one hrad disk. Now I have a problem at this hard disk, so I want to ove centos to another hrad disk.
But backing up centos and restoring them another hard disk is not so easy and takes so much time.
I heard Partimage" can backup hrard disk and restoring it to another hard disk.
[URL]
My box has one LVM composed 3 partitions on one hard disk.
Can I move centos to another hard disk with partimage?
It seems that every time there is vmware client update a couple of my Linux servers always reboot and get stuck at booting up because linux can not start a drive. I end up having to boot off the server did, run install and then run a auto repair to get it to boot up. I tried narrowing the repair to just the file systems but that did not seem to fix it, it has to be a autorepair. So I am thinking that with the vmware client there must be some virtualized hardware address that has changed with the updated client but I am not sure how to check what it is when I get dumped out to what looks like run-level 3 command prompt
View 1 Replies View RelatedCould anyone give the steps for converting a logical volume to a raw disk to mount Oracle ASM Instance on it?
View 2 Replies View RelatedI have KDE 4.4 and Firefox 3.6. Whenever I click a link from a plasmoid widget, it tries to open Konqueror and another instance of Firefox. The page actually loads in the opened Firefox window, but the task bar shows an instance of Konqueror and another instance of Firefox, that keeps loading for a while then close. See image below:
I currently have setup the browser default application as "firefox". If I set this option to use the default application, it opens in Konqueror and I don't see additional windows in the task bar. If I change the option to "firefox %u", then it exhibit the same issue, but the process is much faster, so the loading windows don't stay for long in the task bar. Additionally, it opens the link on a new Firefox window and opens the page twice. Although Konqueror is not loaded, the bouncing icon next to the mouse pointer shows up and stay for a while.
creating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies View RelatedI created a bootable USB for WHS but when starting my server it says �utomatic boot starts in 10 seconds".It then counts down to zero and in stead of starting the automatic boot is restarts with 10 seconds and counting back again.Did I do something wrong ? I have a WHS ISO file and used unetbootin to create a bootable USB stick (I tought)My server finds the USB stick and displays a blue window with UNetbootin at the top.Next line says "default" but thats it.
View 1 Replies View Relatedhow to get a working bootable USB boot disk for DOS using Fedora 12. I needed the dos boot disk to flash my motherboard BIOS as it did not support linux for updating the bios. Thought I'd put the steps involved to help other people who wanted to do something similar. The steps outlined here are for a Fedora 12 system. You should be able to extrapolate the minor changes that may be required for other linux distributions. All commands listed below to be typed in on a command prompt, logged in as root. Here goes...
1. Prerequisites:
syslinux
testdisk
freedos base cd (http://www.freedos.org/)
[code]....
Acknowledgments:
1. [URL] for enlightening me on the fact that testdisk could be used instead of install-mbr
2. [URL] upon which this howto is broadly based.
Do you know if you can burn (or mount - whatever) Ubuntu on a CD from Ubuntu, or must you do it with Windows?
View 2 Replies View RelatedRecently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford. I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.How can I do this? I have two sata drives in the box, running 10.10 desktop.
View 1 Replies View RelatedRecently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford.I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.
View 1 Replies View Relatedok so i was wondering if there a program that i can use to back up all my programs and ubuntu to a boot able disk so say soming went wrong and i had to start over i could pop in the disk and reinstall with all my stuff ready is their a easy way of doing this if u need more info on wat i mean
View 6 Replies View RelatedI have a box that can not boot from USB, yet it can boot from floppy - how can I save the bootloader on a floppy and make it boot from USB?
View 1 Replies View RelatedI am trying to create a bootable DVD disk of Fedora. I am having trouble in doing this. I want to format the Hard drive and create a new file system. I have downloaded the source cds for fedora12 AND fedorai386 downloads. I have been trying to create a DVD burn with the Fedora12.iso extracted and then burned to DVD. This does not work. I just want to be able to pop the DVD in and then start the install, and on any machine.
View 3 Replies View RelatedI have an internal hard drive split between Windows 7 and Fedora 12. The Fedora 12 install exists on a LVM which presents a bit of a challenge when trying to mirror the drive. I was trying to use gparted but it doesn't have support for LVM. I discovered g4l, which does a bit-by-bit copy and ran a full disk copy using that from the 500 GB internal to a 500 GB external. Inspecting it with gparted, the copy LOOKS like it went correctly.
However, when I disconnect the internal and attempt to boot to the external (specifically in the BIOS), it's unable to boot to it. It instructs me to insert bootable media and try again. Has something gone wrong with the copy? It SEEMS like g4l finished faster than it should have given the copy rate it was operating at (I had figured out when it should finish up), but the screen saver had been on and when I came back it was back at the menu, so I don't know if it got to 100% or ended prematurely? There were certainly no error messages...
I'd like to have a bootable cd which then allows me to clone a hard drive, much like the "Ghost" application. I need to copy Fat32, NTFS, as well as the various Linux formats. I've not created a bootable cd before, so a step-by-step would be rather handy.
View 2 Replies View Relatedmy old pc died not long ago so I retrieved its hard disk and bought a USB enclosure. that HD had a ubuntu 9.04 partition and an XP one. Something must have gone wrong somewhere as, although i could still boot from jaunty, I was not allowed to upgrade.
It therefore seemed to me natural perform a clean install, so here's what I did:
- on a win7 computer, I inserted a 9.10 bootable disk
- with usb-disk creator, I wanted to install via a spare image so re-formatted the HD
- I couldn't install a mythbuntu 9.10 after that as I giot an error message ("can't mount the drive" or something similar). yet, in win7 the HD is recognised.
So, what am I doing wrong? Are USB HDs not included as USB devices that you can make bootable? Or should I be installing a !straight" ubuntu version, then install MythTV?
I have a USB which I would like to make the device boot able. I have looked into fdisk and it appears that using fdisk I can only set a partition to a boot able. Please have a look at the output of fdisk command. In the following the sdb1 and sdc1 are both USB Memory Stick. As you can see the sdc1 is set as boot but the sdb1 is not.
Code: Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I would like to have a bootable disk that starts Grub legacy (not Grub 2). I have the /boot/grub/menu.lst that works for my system. When I had a floppy disk I used the option to create same from Startup Manager, but haven't found a way to create a similar disk.
View 4 Replies View RelatedHow to create a bootable cd/dvd from downloaded iso images of CentOS 5? I have collected all the iso in a dvd but it is not booting the system.
View 5 Replies View RelatedI modified the thinclient OS PXES cfg file. Now I want to create bootable disk of pxes.iso file so that I can mount in Virtual box and check whether it wirks properly. I first created a normal ISO using MAgic ISO. When I try to create a bootable disk using the same ISO it asks for "load boot information file". I don't know which file should I select. All I want is to create bootable disk of the customized PXES OS and mount in virtual box and test it?
View 1 Replies View Related