is it possible to extend a mirrored veritas volume which has two SAN LUNs each one in a seperate EMC storage box.
i need to add diska -> EMC box1
and diskb -> EMC box 2
then i need to increase the size of the mirrored volume.
I use vncviewer command line to remote access my pc from my notebook.
Is there any option to resize the view like windows client can by percentage?
my notebook screen size is 1280x800, while I use bigger resolution for my pc 1280x1024 if not mistaken.
already look here: http://linux.die.net/man/1/vncviewer but I don't see any option to do that.
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
View 4 Replies View RelatedI need to replace a disk from a veritas mirrored volume, I can not delete the disk from the diskgroup as the disk is using by other volumes in the same group. so, how can i remove the disk from my mirrored volume and can replace another disk.
View 1 Replies View RelatedFedora 11. I am trying to setup kickstart so it lays out a mirrored volume group. I have 2 disks sda and sdb. I want a primary partition on each disk 200mb in size for /boot. This is to be mirrored onto raid device md0 (raid 1). The rest of each disk is to be setup partition which grows to use the remaining space, and is also mirrored (raid 1) md1. Onto md1, I want an LVM volume group called rootvg, and logical volumes set up on there for /, /home, /usr, /tmp etc. I can lay this out manually, and it works fine. However, the code below, which is slightly amended from a previous anaconda-ks.cfg file doesn't work.
Code:
clearpart --linux --drives=sda,sdb --initlabel
part raid.11 --asprimary --size=200 --ondisk=sda
part raid.12 --grow --size=1 --ondisk=sda
part raid.21 --asprimary --size=200 --ondisk=sdb
part raid.22 --grow --size=1 --ondisk=sdb
raid /boot --fstype=ext3 --level=RAID1 --device=md0 raid.11 raid.21
raid pv.1 --level=1 --device=md1 raid.12 raid.22
volgroup rootvg --pesize=32768 pv.1
logvol / --fstype=ext4 --name=rootlv01 --vgname=rootvg --size=512
logvol /home --fstype=ext4 --name=rootlv02 --vgname=rootvg --size=256
logvol /tmp --fstype=ext4 --name=rootlv03 --vgname=rootvg --size=128
logvol /usr --fstype=ext4 --name=rootlv04 --vgname=rootvg --size=3072
logvol /var --fstype=ext4 --name=rootlv05 --vgname=rootvg --size=1024
logvol /opt --fstype=ext4 --name=rootlv06 --vgname=rootvg --size=1024
logvol swap --name=LogVol06 --vgname=rootvg --size=1024
I've installed Debian Squeeze twice using CD1. First time with a high-speed internet connection using a mirror, 2nd time without. With a mirror, much more is installed, and clearly a much more complete installation. What packages would I install to make a basic CD install more like a mirrored install? Is there a list on the CD somewhere?
View 5 Replies View RelatedThe sound on backtrack 4 is too low, I am running a live cd but cant seem to find the volume nob
View 1 Replies View RelatedSome of my movies have low audio - is there a way to have the final output sound maximized before output (independent of media player software)?
View 1 Replies View RelatedAs I have a opt/sybase folder in Linxs I want to increase the size of this folder how can I increase it? For example the size we mention at the time of installation Sybase is 2gb now I want to increase by 4gb how can I increase it.
View 2 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View RelatedI am running Fedora 15 along with Windows 7 on my Dell laptop. Yesterday, when I was trying to install TeX Live, it stopped in between saying that there is no space left in File System. Even though I have space in my hard drive volumes, space seems to be running out of my system partition which is only 9GB in size (I guess!).I am posting a few results that might help you guys. I have an unformatted 15GB partition. How can I add it to my system partition? And is my var folder too big (1.5GB)? If yes, how do I backup its contents and then delete them? Additionally, the File System shows a folder 'media' (89GB) which links the C: drive that contains Windows 7 and my personal files. Should it remain that way or should I separate it? If the latter, how? I just couldn't find any.
Code:
#df -h
Filesystem Size Used Avail Use% Mounted on
[code]....
i got low space left on my home folder .. i installed ubuntu and set home folder's size to 20 gbs and 70 gbs for my "/" partition , 2gbs for swap.Is there a way to increse those 20 gbs ? maybe take a lil from my "/" partition?
View 2 Replies View RelatedI am using ubuntu lucid.as a desktop and don't run a server. The editor I use is vim so increasing font by edit > profile preferences. What I need to know is how to increase the size in console ie. when I use Ctrl +Alt + F1 to F6. On running xrandr I get this :
[Code]...
I know that,the graphical user interface ( using X windows , I think ) sits on top of the base system ie F1 to F6. In the Fs , xrandr replies "Can't open display ". The question is am I right in thinking that "gui" is totally independant of the base ( is that the correct word ?). I have read that messing about with resolution can wreck a monitor ( I'm using a laptop) , is there a safe way to proceed?
ecently I tried to increase the size of my swap partition using GParted, but it wouldn't let me. I wondering if there was another way? Currently it's 795 MB but I want it to be 1GB
View 3 Replies View RelatedI seem to only be able to set my stack size on my linux server to 15000. If I increase it to 20000 I get a Segmentation Fault. how I can get the linux OS to increase the stack size? Code: threadRet |= pthread_attr_setstacksize( &m_ThreadAttributes, 15000 );
View 8 Replies View RelatedI am working on a C++ application, using the latest Slax as distro and CodeBlocks 8.02 as IDE.
I have a problem that is really biting me hard... And i'm sorry if my questions will sound trivial: i'm still a C++ noob...
Basically,looking with KSysGuard i can notice a constant increment of the VmRss parameter,i.e. the resident set size of my program.
While stepping with the debugger i noticed that the VmRss parameter increases by 4 (KB?) when i push_back into some STL vectors (i have this problem in various parts of the code).
While i analyze the problem with KSysGuard i'm also looking at the /proc/statm file of my process. When KSysGuard shows a VmRss increment by 4, i can actually see an increment (by 1) in the 2nd parameter of that file (which is the resident set size) but not in the 1st parameter (which is the total program size).
What surprises me most is that the VmRss is reported in KB and i really am not pushing 4 KB inside the vector all at once...
So i ask:
1)Is this a memory leak?
2)Why the total program size doesn't increase?
3)To me, it looks like VmRss increases "cumulatively" only after several insertions in the various vectors.
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
Based on the reading I've done over the past 48 hours I think I'm in serious trouble here with my RAID 5 array. I got another 1 TB drive and added to my other 3 to increase my space to 3 TB...no problem.
While the array was resyncing...it got to about 40%, I had a power failure. So I'm pretty sure it failed while it was growing the array...not the partition. Next time I booted mdadm didn't even detect the array. I fiddled around trying to get mdadm to recognize my array, but no luck.
I finally got desperate enough to just create the array again...I knew the settings of my and had seen some people have success with this method. When creating it, it asked me if I was sure because the disks appeared to belong to an array already, but I said yes. The problem is when I created it, it created a clean array and this is what I'm left with.
Code:
/dev/md0:
Version : 00.90
Creation Time : Sun Sep 5 20:01:08 2010
Raid Level : raid5
Array Size : 2930279808 (2794.53 GiB 3000.61 GB)
[Code]....
I tried looking for backup superblock locations using e2fsck and every other tool I could find, but nothing worked. I tried testdisk which says it found my partition on /dev/md0, so I let it create the partition. Now I have a /dev/md0p1, which won't let me mount it either. What's interesting is gparted reports /dev/md0p1 as the old partition size (1.82 TB)...the data has to still be there, right?
I'm currently setting up a server with 2x 1TB disks in raid1. (Centos 5.5)In the future, if the storage is insufficient and I decide to upgrade the disks to 2x 2TB, could I just:
- dump ghost image of the array on usb drive
- replace hdd's and build new array
- ghost array with image created previously
Would the above work, will the new partition automatically resize to 2TB or do I need to partition right now with LVM? would it work with LVM?
On a full update centos 5.5 64 bit every day increases slab cache , specialy size-2048 eat a lot of memory ..
how can change this ? maybe a kernel bug ?
cat /proc/slabinfo
slabinfo - version: 2.1
# name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> : tunables <limit> <batchcount> <sharedfactor> : slabdata <active_slabs> <num_slabs> <sharedavail>
[Code]....
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedNew Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedIn my Solaris tcp client server program, In server side I am checking the size of recv buffer, based on different listen queue size.
I was expecting this size to be increased due to the increase in receive queue size. why the value is same ?