Is it possible to use SuSE 11.2 with a dual monitor setup, one monitor being 16:9 running 1920x1200 and the other being 4:3 running 1600x1200? I'd like to know before I start buying the equipment.
View 2 Repliesjust setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work.
The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything.
I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is:
ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync
This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is
Section "Monitor"
Identifier "Monitor0"
ModelName "SyncMaster"
DisplaySize 518 324
[Code]....
I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem.
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
I have an Acer Aspire 5100 with AMD turion 64X2 and an ATI radion XPRESS 1100 graphics card.I recently installed suse 11.2 (clean install) without much trouble but I've always had some intermittent trouble were the screen would just go blank after boot up (before login screen) this did not happen always and never happened in safe mode or on XP on the same laptop, ergo software fail.Anyway, this morning I have a laptop with absolutely nothing on the screen from start to end. I also get a loud beep followed by two shorter beeps!If I let the boot up progress I can blindly find myself in normal Suse or in safemode or even in XP all without anything on screen
View 5 Replies View RelatedLast friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
how to remove the linux opensuse which are dual boot with window ?
View 1 Replies View RelatedI'm running openSUSE 11.3 64 bit KDE 4 standardI have two monitors attached, running simultaneously, nicely, all is well.But when I reboot I have to set them up again because the settings don't stick/endure through a reboot.The GUI configurator that I use is at Menu --> Config Desktop --> General --> Display.How do I save the underlying settings and re-invoke them at boot time, perhaps from the CLI? Or some quick process that will do the job.
View 8 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI have two identical Samsung monitors. One is connected. to my motherboard VGA port (and appears as a Radeon HD 4200).The other is connected to a VGA port on a separate PCI Radeon 9200 PRO board. When I first installed Suse 11.3, I had to go through the nomodeset boot command (otherwise my system froze up on boot) and I only get video on the screen connected to the motherboard. The other monitor light. flashes which means it's not seeing a video signal. And, I do not have an xorg.conf file in /etc/X11.
So I did the following:
I did an Xorg -config which created an xorg.conf.new file which looked sensible in that it showed both Radeons, and appeared to set up a dual-head system. The only change I made was to change the driver for both controllers from radeon to radeonhd. Then, I copied xorg.conf.new to /etc/X11/xorg.conf and rebooted. And, nothing is changed. I still need to do nomodeset on boot and I still only get video on the screen connected to the motherboard. I'd attach the xorg.conf and Xorg.0.log files, but it says I can't add attachments to this post. I don't see any major errors in the Xorg.0.log file, but a lot of it is greek to me.
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies View Relatedasus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies View RelatedI have opensuse 11.3 (64 bit) with nvidia 8400GS (256 MB ram). The system is a core 2 T7500 with 4GB Ram. I have installed nvidia drives (through nvidia's .run file, versison 256.35)
1) When i connect an external monitor (1440x900) and use separate x-screen+ xinerama (laptop has 1280x800), desktop response is really slow. Moving windows,switch tabs etc make desktop (kde) barely useful. Especially if i open a large txt file it is almost impossible to scroll through this file.
xorg file (see attached file) is been created by nvidia-settings.
One minor solution I found is to use 16 bit (instead of 24bit) color. This makes everything better, but still not fast enough. I do not use desktop effects.
An important note: This happens only after some period of time. After reboot everything seems to be ok for some time, but suddenly something changes and I have slow response.
I do not have the same problem under windows.
2) How can i specify that laptop's screen be the default, so it can have the taskbar?
3) When i disconnect the external monitor and restart x, then the laptop screen goes to 1024x768 and not to 1280x800. I have to create another xorg.conf and restart x. How can I make just one xorg file, and the system automatically adjust resolutions regarding if i have one or dual monitors?
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.35 (buildmeister@builder97.nvidia.com) Wed Jun 16 19:14:45 PDT 2010
Section "ServerLayout"
[Code]....
Today I bought a new monitor (IPS236V) to use it to watch movies and tv while I'm working on the other one.. I thought it's the best to activate Xinerama which could be done easy via CCC. But I'm not able to change the resolutions now as these panels are disabled in CCC. The first monitor is set to its native resolution, but the second is something lower.How can I configure both monitors to there native resolution?
View 5 Replies View Relatedwith KDE everything works fine (both monitor show their configured displays correctly), however oddly with gnome when i try and setup dual monitor display, i get blank screens on both monitors, however on the display 0 on the left side there is a full column single pixel width green strip. the rest of display 0 and 1 are blank, however my mouse will move around both display correctly.
View 1 Replies View RelatedI dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI have 2 monitors. I'm using the Nvidia driver in Twinview Mode on the right side. I can move the cursor from one monitor to the next and I can drag applications between the two. I have multiple activities. And the second monitor selected one of those other activities as the background. I'm not sure how this was chosen, or if I have a choice. Anyone know? Do activities affect what is displayed in a dual monitor setting? As I toggle through the activities, the two monitors change, but never to the same one.
When I open an application, it's a guessing game which monitor it appears on. Can I control that?
I know if one clicks the top left corner of an application they can send it "To Desktop" ("all", "Desktop 1", "Desktop 2", etc). If I could assign "Desktop 1" to monitor 1, and "Desktop 2" to monitor 2, I could then use the "To Desktop".
At a minimum, how does one control where applications open in a dual monitor setting?
I'm trying to get an external monitor hooked up to my laptop with the intention to use both simultaneously using TwinView. Actually, I'm not "trying to make it work": everything works fine, using NVIDIA X Server Settings. However, when I reboot these settings are lost and I have to manually expand my desktop again.
I've found that running NVIDIA X Server Settings as root should allow one to "Save to X Configuration File", in order to let it automatically load the right settings. When I click this option, however, I'm asked to manually provide a file name with my home folder as the default location. I'm confused how to proceed - where should I save this configuration? Or should I be taking a completely different approach in the first place? (note: KDE 'Display and Monitor' doesn't work. Only when I use the NVIDIA-thingy KDE will recognize that my desktop is expanded to a 3600x1080 resolution)
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
I have a really strange X (?) problem. My physical setup is:
Dell Optiplex 990
VisionTek 210 nV DMS59 PCIe video card (with a DVI splitter)
dual Dell P2411H monitors
I'm running OpenSuSE 11.4 (x86_64 fully patched) with the current nvidia drivers and kernel module. I'm running KDE and kdm in case that matters.
If I power off the two monitors, and then power them on again, the right monitor will come back on. The left monitor (which is the primary one... it's the one where the login screen appears when you are first logging in) reports that it is in power save mode. Wiggling the mouse, typing, etc., do not wake it up. The only thing that wakes it up is the detach the DVI cable from the monitor and reattach it (and sometimes it takes a couple tries).
I have used two (identical) video cards and splitters, and the problem occurred with both, so the problem doesn't appear to be with either of them. I also swapped monitors, but after the swap, the problem still occurred on the left monitor, and the old left monitor (which was now right) came on fine, so it doesn't appear to be a monitor problem.
I'm baffled. For now, I just won't turn off the monitors (or at least not the left monitor).
I was successful in getting the ATI catalyst software to set the displays to maximum resolution. The second display is dark. It shows a white "X" cursor if I move the mouse to the second screen. The KDE desktop configuration manager does not recognize the second monitor.
Here is the output of: cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" 1920 0
[Code].....
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedIs there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedI am installing SuSe 11.3, and during the initial boot after installation, I got "out of range" message on the monitor and nothing happens afterwards.My PC is dual CPU (intel), Video card is " nVidia N240GT" and the monitor is Gateway flat screen "FPD2485W".I tried both interfaces (gnome and KDE) and got the same problem ("out of range")
View 4 Replies View RelatedI am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies View RelatedI just installed Fedora 12 on a rack computer. I know my screen has the ability to show 1600x1200 pixels. But I don't know what my video card can do. Right now my screen is stuck at 800x600. When I had Fedora 11 I remember it could go to 1024x768 or maybe a little larger. I can't really find a driver for the ATI RageXL, How to make the screen resolution as high as possible.
View 3 Replies View Related