Ubuntu Installation :: Xp And - Netbook Dual Boot - Error - Windows Boot Failed
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
ADVERTISEMENT
Dec 4, 2010
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Nov 27, 2010
I'm using an Acer Aspire One with Windows XP Home 32-bit SP3. I couldn't find any directions on how to dual boot with a netbook or more specifically my netbook.
Edit: Here's alink just incase [URL]
View 9 Replies
View Related
Jan 18, 2010
I managed somehow to successfully install a dual boot with Ubuntu 9.02 and Windows XP. Ubuntu was on a PATA drive and the WinXP was on a SATA drive. The SATA drive was configured to boot first. As I was having problems with Ubuntu I booted into WinXP, re-formatted the PATA drive, then restarted the computer and installed Ubuntu 9.10. It all went well.I rebooted the machine and the following message was on the screen:
GRUB Loading stage1.5.GRUB Loading, please wait....Error 17
I rebooted, changed the boot order so that the PATA disk (Ubuntu) started first, then the SATA(WinXP). Ubuntu loaded up the dual boot screen.I chose WINXP, but I was greeted with a black screen.I rebooted again and chose to load Ubuntu, which it did without a hitch.what I should do to restore my access to WinXP? Or should I start again? If so, how?
View 9 Replies
View Related
Sep 6, 2010
I'm trying to dual boot windows XP and ubuntu netbook (XP is the main OS) on my Asus eee 1005HA.
I have the ubuntu on a flash drive and it's bootable, but when I try to install, it only recognizes the flash drive and not the hard drive. How do I make it recognize my hard drive?
View 9 Replies
View Related
Jan 16, 2011
I'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
View 7 Replies
View Related
Jun 14, 2010
I am running Windows 7 starter on my Samsung N150 Netbook. I have successfully installed Ubuntu on the 4 GB flash drive, and I have been running it for several weeks in the "try mode" without any problems. Now I decided to permanently install Ubuntu netbook edition on my computer from a flash drive. I am following this guide [url] and ran into a big problem on step #5 of the guide and step #4 of the installation. I am not getting the option of installing them side by side, choose between them each startup! Which is what I want to do... I am only getting the option of erase and use entire drive, and specify partitions manually. My goal is to keep Windows 7 on my netbook, and have an option of dual booting into either operating system.
View 4 Replies
View Related
Jul 25, 2010
i do not get this i have a computer here that i installed ubuntu 10.04 on it side by side with windows using the ubuntu installer now windows will not boot at all it just restarts every time we try to boot into it now im not stupid i tryed reparing the os many times with the disk no luck when i was exploring in the windows cds command line it showed that his intire os was moved to the d:/
View 14 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Nov 7, 2010
I recently bought a new Samsung netbook N310 and want to install dual-boot Ubuntu 10 along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz
Which architectures and kernels I should download from the cd installation? any experience with this kind of dual boot installation?
View 1 Replies
View Related
Dec 10, 2010
Perhaps I should have put this in the apple users section, but I am not an apple user. I am using a MSI WIND U100 running OSX snow leopard retail (GUID/GPT - boots using Chameleon).
I've been feeling guilty preaching open source while not currently practising what I preach so finally downloaded ubuntu 10.10 (netbook version) and using unetbootin I made the ISO bootable on an external USB drive.
I already had an empty 40gb partition which I'd intended to dual boot linux on so I went ahead and booted from the external and installed ubuntu. During the install I divided up the 40GB with 3GB for swap and 37GB as ext4 mount point /
Anyway, it installed and rebooted and loaded ubuntu fine using the default option in the auto installed GRUB. However, although the menu show my OSX it does not boot (ARGH!). When selected there is disk activity for a few seconds and then nothing, just blank screen.
I'm praying that I just need to tinker with grub or something to get my OSX back...
(PS> the [URL] forums have loads of info on dual/triple booting these hackintosh netbooks but mostly involving windows XP or windows 7 rather than ubuntu and also mostly about earlier OSX varieties which booted onto MBR partitions rather that GPT.
View 1 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Dec 28, 2010
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
View 2 Replies
View Related
May 14, 2010
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
View 9 Replies
View Related
Oct 28, 2010
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
View 9 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Nov 7, 2010
I recently bought a new Samsung netbook N310 and want to install dual-boot Debian lenny along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz which architectures and kernels I should download from the cd installation? there are so many:alpha, amd64, armel, hppa, i386, ia64, mips, mipsel, powerpc, s390, and sparc.
View 4 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
May 27, 2011
I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?
My /etc/grub.conf file in fedora is as follows:
Code:
View 2 Replies
View Related
Apr 9, 2010
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
View 2 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
Jan 7, 2010
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
View 5 Replies
View Related
