Red Hat :: Unable To See The Screen Once Installed Red Hat 5
May 21, 2010
1.I booted from a DVD of RHEL 5 to install RHEL.
2.At the very 1st screen of the installation a red window comes.I press enter to start GUI installation.
3.By keeping all option default I finish my installation successfully in a GUI mode.Then my PC asked me to reboot & eject the CD.
4. I eject my CD and click the Reboot button.
5. Finally when my PC rebooted then My monitor acl 14 " CRT So I see a black screen. But My CPU is working ! After waiting 30 minutes I don't get any result/output screen on my monitor. Thats the problem !
View 3 Replies
ADVERTISEMENT
Jun 11, 2010
I've installed Fedora 13 x86_64 and am not able to hibernate (though suspend works fine). This is the case either with or without the proprietary Nvidia drivers from rpmfusion. When I click System -> Shut Down -> Hibernate, the screen just goes dark. Moving the mouse activates the display and the password confirmation box appears. Judging by the disk activity light, nothing is written to disk. Swap space is configured correctly.
Looking at the last few lines of /var/log/pm-suspend.log I see this:
It looks like grub (or the absence of grub.conf) is interfering. Problem is, I'm not even using Fedora's grub to boot the system. I'm dual booting with Ubuntu 8.04 and am using that grub. The section from that grub's menu.lst is:
But of course Ubuntu 8.04 is pre grub2 so how do I satisfy Fedora's grub.config without messing this up?
View 1 Replies
View Related
Jan 1, 2011
I was using irssi in screen but lost connection. After I ssh'd back in to the server, I can no longer attach to that screen. screen -ls shows that the screen is already attached. I tried screen -D to force detach it, and it said detach but screen -ls still says it's attached. I tried screen -x and it just hangs there.
[sub@server ~]$ screen -ls
There are screens on:
4033.poe (Detached)
7728.irssi (Attached)
2 Sockets in /var/run/screen/S-sub.What can I do now?
View 4 Replies
View Related
May 31, 2011
I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
View 5 Replies
View Related
Jul 7, 2011
I'm trying to fix this screen problem I continue to have (an example: in Evolution, its like my screen is too small to see everything, I have to scroll over down or over, then the window moves over and pulls me back to original spot. I've tried to change the screen resolution and that actually makes things worse. The screen problem is very irritating and I don't know why its happening. I've been using Ubuntu or Mint for years and have never had this problem.
Also, a similar problem but nowhere near as annoying: the sides of either side of screen are black. I can't get the monitor to be completely filled. I went to Intel's website and they have a few drivers compatible for linux (at least that is what they are saying).
I'm using Ubuntu lts 10.04 lucid lynx
2.6.32-32-generic
mscatamaran@mscatamaran-desktop:~$ lspci
[code]....
View 1 Replies
View Related
Apr 10, 2010
was just wodering if anyone know if HoN works with wine ? and why it doesn't work with ubuntu cause I installed it and only a black screen came up what is wrong ?
View 2 Replies
View Related
Dec 19, 2010
The pc has 3 disks sda and sdb not partitioned (for future raid use, the first 3 disks are hot pluggable) and sdc (on sata port 4) with
sdc1 for /boot (shared)
sdc2 set to swap
sdc3 extended
sdc5 for another linux distribution
[Code]....
I have installed without any problem but at time to configure the bootloader the only choiches are sda or sdc1.
I have also lilo installed on the mbr so i have added in its configuration the image and the initrd of centos with root configured as /dev/sdc6.
In every case the system stat, try to find raid devices, try to resume from sdc4 (this will be another problem in the future, I need to disable this), and later hal with a kernel panic unable to find root.
I think the kernel command line parameters are not correct but seriously i am not able to find them.
View 4 Replies
View Related
Feb 24, 2010
I installed Kmod just earlier today. I also updated everything else today. After i rebooted, the text boot said "enabling nvidia driver [ok]", but it never leaves the text boot! It freezes after "Registering binary handler for Windows applications: [ok]".
What can i do!?
View 9 Replies
View Related
Sep 12, 2010
i am running xubuntu and most of the screensavers says "not installed" where can i view/install the screen savers?
View 1 Replies
View Related
Oct 16, 2010
ive recently installed ubuntu 10.10.. but it does show any boot screen..even in ubuntu 10.04 it showed no boot screen..it just displays a black screen for 5-6 second..why is this happening?
View 3 Replies
View Related
Mar 25, 2011
i have installed x3270 in ubuntu 10.10 but when i maximise the screen it does not allow it says main window does not fit in x display
View 1 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside KVM on Cent OS 5.6. how do you change the screen size of the Windows 7 KVM. It is about a third of the size of the current screen resolution.
View 3 Replies
View Related
Oct 29, 2010
I attempted to install the CLI management tool for my Highpoint Rocket Raid card (rr62x) downloaded from this page: [URL] When I tried installing it, this is what happens:
Code:
# dpkg -i hptraidconf_3.5_amd64.deb
Selecting previously deselected package hptraidconf.
(Reading database ... 68853 files and directories currently installed.)
[code]....
How can I get this package removed? I was able to get a different management tool installed to configure my RAID so I don't need this one. My system appears to be working, but everytime I use apt-get to install something else, it shows the hptraidconf package as failed.
View 9 Replies
View Related
Jun 2, 2011
I installed Debian squeeze on my old Dell Latitude C600 laptop. I Installed it from a cd that worked to a friend of mine. I finished the installation successfully. After booting the computer I can get to the grub screen and after choosing the OS (Debian GNU/LINUX, with linx 2.6.32-5-686) I see the computer loading and running command lines, but after few lines, I get black screen and I hear the computer "working" but can't see anything and it doesn't react to anything that I do.
View 9 Replies
View Related
Jul 4, 2010
I just installed Fedora 13 with KDE4 and my screen flickers! I have already read section 5.1 of [URL] but am unsure about how to carry out the suggestions. For instance how do I add "nomodeset" as a kernel parameter? I do not even know whether this is the proper solution.
View 2 Replies
View Related
Mar 28, 2010
Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
View 6 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
May 29, 2010
I installed Ubuntu 10.04 using Wubi. Everything works well, but randomly while I am working my screen will go black and say out of range or no signal. My monitor is a Planar, I have resolution and refresh rate set at factory specs and most of the time it is clear and working well. It seems to be completely random, sometimes it happens while surfing the web, other times I am using gimp, and sometimes I am not near the PC at all. I assume the problem is also the reason I can not use Compiz as well. (Graphics card is a intel 845).
View 6 Replies
View Related
Feb 27, 2011
I've been a casual Ubuntu user for a little over a year via Wubi. Wubi stopped working for me, failing to load Ubuntu, and instead giving me some console message about BusyBox 1.13.3 dropping into a shell. I poked around, and found posts by other wubi uses having a similar issue, and that a frequent recommendation was to install Ubuntu via Live CD; so I uninstalled Ubuntu from WindowsXP, made a LiveCD, and installed it.
I got to a point in the Live CD install where it wanted me to reboot. Instead I got a screen full of I/O errors, corresponding to a drv0 sector, or some such. I ended up using the reset button on the box. I was AFK during the reboot, so I don't know if a bootloader screen ever came up, but now it just loads WinXp with no choice to boot Ubuntu.From WinXp I can see the Live CD was successful in creating it's own partition (as WinXp has gone from 80 to 50GB as planned). Windows seems to be fine, though.
View 7 Replies
View Related
Sep 9, 2010
I am using ubuntu 10.04 and after installing some programs using the package manager I try to open the program and all I get is the title bar and a blank white screen. I searched the forums and found a thread from awhile back saying to create a new user and see if it persists. I tried that and it does the same thing in the new user. One in particular is gnucash. The program sometimes works but the tutorial does the white screen. I also reinstalled the package several times with no luck. Other packages do the same thing like thunderbird.
View 9 Replies
View Related
Dec 9, 2010
i installed ubuntu in my system after that i formatted my xp and installed it again. After installing ubuntu is not showing in the boot up screen. can any one say what to do for showing ubuntu in boot uo screen...
View 7 Replies
View Related
Sep 23, 2010
I recently installed Mint 9 using/trying KDE, which I found very intuitive and feature-rich. However, a snag soon appeared. The screen started to blank every few seconds or minute. This is pretty annoying. I have so far tried every tried-and-tested means available, exhaustively, to no avail. Even their website has this as a known issue, yet the solution (i.e. configuring the screen resolution) doesn't seem to work for me.
View 1 Replies
View Related
May 12, 2011
I am trying to access my Debian system from a MB Pro. I believe I have all the necessary packages installed,but I unable to figure out how to actually connect, because I don't know what my hostname should be.On the Debian system, my username is jack and the hostname is aceraspire. jack@aceraspire:~$ hostnameaceraspireOn the mac terminal, I type ssh jack@aceraspire but it says ssh: Could not resolve hostname aceraspire: nodename nor servname provided, or not known.I feel like I'm missing the .edu or .com portion, but what is it supposed to be/how can I set it or find it?
View 3 Replies
View Related
Feb 19, 2009
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
View 9 Replies
View Related
Jan 21, 2010
I am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
View 4 Replies
View Related
Jul 16, 2010
I did recently install aria2 and everything installed smoothly. but i am not able to locate it. I know it will be in the applications->internet but its not there.
View 7 Replies
View Related
Jun 8, 2010
i'm unable to get the cisco vpnclient installed on lucid 10.4.I have tried a few guides from the 9.05 and even 8.10 but most of them require patches that are for them kernal versions i'm unable to find anything for 10.4 patch wise. anybody come across this yet and more importantly did you win ?
View 1 Replies
View Related
Apr 20, 2010
i have edge server. raid(5) have been installed but not able to check raid health. using command line able to.but using monitoring tool opsview, showing error -NRPE: Unable to read outpumachine Arch- 64 bit centos -5.2
package installed -MegaCli-2.00.15-1.i386.rpm
View 2 Replies
View Related
Jun 25, 2009
I had mandriva 2009 installed in my system everything was fine till I installed a new graphics card xfx nvidia gts250. My motherboard in Intel 946giz. I was able to change it to lenny with got installed perfectly but when I boot in linux it goes into an infinite loop giving me call trace and all I tried sabayon 4 and suse11. 1 live cds but was not able to boot into their live cd environment.
View 5 Replies
View Related
Mar 14, 2011
I'm new to fedora and also new to Linux too. I'm using lenovo SL410 which is not provisioned for serial port. Now I want to configure cisco router via serial-usb (Z-TEK) converter, for that I have installed minicom and still I'm not able to connect to router. Do I need to install driver for converter that I'm using?
View 2 Replies
View Related
