Ubuntu Installation :: Live CD Installed No Bootloader Screen
Feb 27, 2011
I've been a casual Ubuntu user for a little over a year via Wubi. Wubi stopped working for me, failing to load Ubuntu, and instead giving me some console message about BusyBox 1.13.3 dropping into a shell. I poked around, and found posts by other wubi uses having a similar issue, and that a frequent recommendation was to install Ubuntu via Live CD; so I uninstalled Ubuntu from WindowsXP, made a LiveCD, and installed it.
I got to a point in the Live CD install where it wanted me to reboot. Instead I got a screen full of I/O errors, corresponding to a drv0 sector, or some such. I ended up using the reset button on the box. I was AFK during the reboot, so I don't know if a bootloader screen ever came up, but now it just loads WinXp with no choice to boot Ubuntu.From WinXp I can see the Live CD was successful in creating it's own partition (as WinXp has gone from 80 to 50GB as planned). Windows seems to be fine, though.
View 7 Replies
ADVERTISEMENT
Jun 4, 2011
I tried to install Ubuntu 11.04 via .iso + USB key to my Asus EeePC 1000HE. This computer comes with two partitions already on the hard drive so I installed to the empty one, to dual-boot with Windows XP on the other. Installation seemed to work, but after resetting, the computer always boots straight to Windows, not Ubuntu or an OS list.From my Ubuntu boot USB, sudo fdisk -l shows that the installation wrote to the partition successfully.From Windows, the partition appears to have disappeared.So it seems that the installation worked except that I have no way to boot to Ubuntu.
View 3 Replies
View Related
Dec 15, 2010
I am installing Ubuntu 10.04 server on a box with no optical drive, using a USB pen drive created using Ubuntu's Startup Disk Creator. Installation works just fine. However, instead of installing the MBR/grub2 on the hard drive it is installing it on the usb pen drive - i.e., I can't boot without the pen drive being the bootable device. I tried 'grub-install -root-directory=/boot /dev/sdb', but that didn't work.
I then tried 'apt-get purge grub-common' and then 'apt-get install grub-common'. There is a known bug where it tells you that there is no bootloader installed and do you want to continue without one Y/N - N just sends you straight back to the same dialog instead of installing. I'm not interested in recovering as it's a brand new install - easier just to redo it correctly from the start. So the question is this: how can I install from a USB pen drive and have the bootloader install properly?
View 3 Replies
View Related
Dec 9, 2009
I've installed Fedora to dual-boot with Ubuntu. I'm using /dev/sda1 for Ubuntu, and /dev/sda3 for Fedora. Unfortunately, I unchecked the "Install boot loader" checkbox, so I still have the Ubuntu boot loader but no way to boot Fedora. While still logged into the Fedora Live CD, how can I install the Fedora boot loader to /dev/sda3 and set it up to chainload from Ubuntu's GRUB menu? (I'm thinking it would be 'grub-install /dev/sda3' as root, and then just edit /dev/sda1:/boot/grub/menu.lst, but I'd like confirmation.)
View 2 Replies
View Related
Mar 30, 2010
I just finished installing lucid lynx netbook to my jump drive (full install) to save room on my hard drive. It's working fine except the bootloader was installed to the jump drive as well, meaning I can't boot my computer without the jump drive. Is there any way to correct it so that the computer boot from the hard drive while keeping my install on the jump drive?
View 2 Replies
View Related
Nov 29, 2014
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
View 3 Replies
View Related
Apr 8, 2010
I'm trying to create a live cd - or at least an installation cd - from a 9.04 installation that already has the programs I need installed. For instance; I have 9.04 installed, along with a postgres server, jdk1.6, and a certain java app that only works in 9.04. I perform the same installation procedure on several pc's weekly.And I'd like to cut the work down to installing a "custom" ubuntu with all software already installed.
View 1 Replies
View Related
Apr 16, 2011
In the end, I am trying to dual boot my MacBook Pro with Fedora 14 and OSX. I am having issues getting the bootloader working for Fedora though. I have setup my partition table like this:
/sda1 - EFI
/sda2 - OSX
/sda3 - /boot
/sda4 - LVM (root, home, swap)
Fedora installs fine, and the bootloader installs to sda3. I use rEFIt to allow me to boot to my Linux partition, but when I do I get "no bootable device". I have done a little reading and have found people have problems doing with this with GRUB (default Fedora bootloader). So what I would like to do is try installing LILO or maybe even GRUB2. how to change the bootloader Fedora installs from the Live CD?
View 1 Replies
View Related
Dec 27, 2009
Since I had a little time on my hand over christmas break, I decided to do my sister a favor and install linux on her computer (consentually, mind you). But so far, I've caused nothing but trouble, since I can't get Suse to boot. I've reinstalled over and over and over, but everytime I install and reboot, the computer complains that there is no operating system installed.
After a while of reinstalling, I tried to install a boot loader from the live cd instead, but when I open yast to do this, it compains that 'because of the partitions, the bootloader can't be installed properly'.
I've tried pretty much about everything, but nothing seems to work.
View 4 Replies
View Related
Feb 27, 2010
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
View 9 Replies
View Related
Jun 24, 2010
I use the usb-creator tool to create a persistent usb live-cd. Works like a charm, only, every time I boot it asks me if I want to try (live cd environment) or install.Id like to get rid of this screen. It just needs to boot into the live-usb environment.
View 1 Replies
View Related
Mar 12, 2011
I'm trying to install opensuse 11.4 but I got this error:
"The bootloader is installed on a partition that does not lie entierly below 128 gb. The system might not boot if BIOS support only lba24(result is error 18 during install grub MBR)"
What should I do before click next step to install? I installed opensuse with this error and some times opensuse can boot and some not. At least I was able to boot safemode.
View 5 Replies
View Related
Apr 24, 2010
I am completely new to Ubuntu and recently installed Ubuntu 9.10 using the live CD. I allowed the set-up to install Ubuntu next to Windows XP and to let me choose which OS boots at start-up. Upon restarting my computer after installation, however, there is no boot-screen and my computer goes straight to WinXP. I have done some reading and it seems like I need to install GRUB, but I'm really not sure if this is really the case or if I am missing something else entirely.
View 9 Replies
View Related
Apr 30, 2010
I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
View 9 Replies
View Related
Jul 23, 2010
When I attempt to boot my computer using the ubuntu 10.04 64 bit live cd the screen lights up briefly about every 2 seconds before blinking off again.The ubuntu booting process is shown just long enough for me to see that it appears to be working besides this display issue. I also had this issue attempting to install kubuntu 10.04.My system currently runs opensuse 11.2, but before that it had mint linux 8 and an older version of ubuntu which both worked fine.Has anyone else experienced this?Any ideas or is ubuntu on my computer a lost cause?
View 2 Replies
View Related
Aug 28, 2010
As the title says, when I select the install option on the liveCD, the Ubuntu logo is shown, and the flickering starts. I've tried the vga=XXX option, but no luck. Any experiences? It doesnt' happen with the 9.10 live CD...
View 3 Replies
View Related
Sep 5, 2010
ive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies
View Related
Oct 2, 2010
I can not boot ubuntu 10.10 rc from the live cd on my AMD 64bit Gateway. After the initial splash page - the title Ubuntu with the underlining blinking dots - the screen goes bonkers - criss crossy-like.I've installed Ubuntu 10.04 previously with no problem. I've tried both the RC version and the daily build version. Is it a problem with the install CD or a hardware issue - i.e., integrated video card? (...Although you would think that if it was the video card, the splash page wouldn't appear.)
View 1 Replies
View Related
Feb 11, 2011
When I try to boot from the Live CD of Ubuntu 10.10, I end up with a whitish corrupt screen, which should be the 'Desktop'. The CD is good and works on other PC's. I have tried two other graphics cards with the same result. It is therefore impossible even to install it. I have installed many other versions without problems. This PC works perfectly with Windows XPVistaWindows 7 and other Ubuntu versions.
View 3 Replies
View Related
May 25, 2011
don't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies
View Related
Jan 18, 2009
Got NVidia GeForce 6200 TurboCache videocard. The free nv driver does not work with this card. Tried to get a screen with boot param: xdriver=vesa. Does not work: gives a black or blue screen too. start the live cd with vesa?
View 14 Replies
View Related
May 20, 2010
I can't get the Ubuntu 10.4 Live CD for PPC to work on my old 800 MHz flat screen iMac G4. I believe it's supposed to work, but the installation dies with a magenta screen about a minute after selection of any boot option in the yaboot dialog.I tried all the sensible boot choices and options, all with the same result: some trundling of the CD reader, display of the messages related to the ramdisk, more trundling, then a blank magenta screen and no more trundling. The iMac becomes totally unresponsive: no more messages, can't enter any command shell. I get the impression (complicated story) that it begins to install the X server and then aborts.
This iMac has a PPC G4, 512 MB of working memory, and a GeForce2 MX video card with an nVIDIA chipset and 32 MB of video memory. There seems to be no hardware problem: OS-X 10.3 and OS-9 run just fine including wireless networking.
View 9 Replies
View Related
Nov 7, 2010
I am trying to run Ubuntu from a live USB, everything seems to be great until I get to the part where the GUI should come up. Then I get this screen. It's a little hard to see, but it's basically a white bar at the top and black underneath. The black is flickering a lot and the flickering can stay for a short while (30-120 seconds) even after I have rebooted into windows. Sometimes the bar at the top is another solid color (purple,blue, orange, usually white though), I think it is putting my monitor in a strange version of it's self test.
When it is unplugged the monitor while cycle through full screens of different colors. I have tried Ubuntu 10.10 Desktop AMD64, 10.10 i386, and the latest Fedora to see if another distro had different results. I have also tried 2 other USB drives. I am using Universal USB Installer 1.8.0.8 to make the drives. My own searches have found some problems with graphic drivers for the GeForce 8800 GTX, but they a bit dated. I have tried adding vga=vesa to the boot arguments, I am not sure if I did it right or not, but it resulted in a black screen with a blinking line instead and no flickering.
System specs:
AMD Phenom II 740BE (unlocked to Quad Core @ 3.4Ghz)
ASRock Extreme3 870
WD Caviar Black 640GB 7200RPM 6.0Gb/s
GSkill 4GB PC1600
GeForce 8800 GTX
Dell 3007WFP
View 1 Replies
View Related
Mar 19, 2011
I've been trying for some time to install Ubuntu 10.10 or variant on my Toshiba C660 with ATI graphics card.I seem to keep hitting a brick wall when attempting to run a live disc and end up at a blank screen. I get this result despite tryingots of different installation discs. Ubuntu 10.04 seems to run with no problems.I believe the problem is to do with the graphics card from googling and have tried various changes to the live cd/dvd boot options (set nomodeset & radeon.modeset=0) but with no success
View 1 Replies
View Related
Jul 10, 2010
I've downloaded Ubuntu, Fadora, Linux Mint and Suse, trying to run their live cd's on my old IBM A21p. Each time the screen splits vertically when the package enters the desktop. I'm certain that it's the ATI 128 mobile graphics card in the machine, but I don't have a clue about how to resolve the problem. I would love to run Linux on this system, but I don't have the technical background to get past the initial issue, which is the screwed up graphics.
View 7 Replies
View Related
Oct 21, 2010
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies
View Related
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
Jun 8, 2015
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
View 5 Replies
View Related
Feb 24, 2009
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
View 2 Replies
View Related
Nov 2, 2009
Wanting to try F11 out and having an issue straight off the bat (perhaps I should see this as a sign of things to come and stop here!).I grabbed the live cd last night and burnt to cd OK (I'm not a noob at stuff like that); the cd boots as expected and I'm presented with the initial logon screen; I click to log in as Live System User, the "Other..." option vanishes but then nothing happens from there.I've left it for 20 minutes so far
View 3 Replies
View Related
