Fedora Hardware :: Installed 13 With KDE4 And Screen Flickers?

Jul 4, 2010

I just installed Fedora 13 with KDE4 and my screen flickers! I have already read section 5.1 of [URL] but am unsure about how to carry out the suggestions. For instance how do I add "nomodeset" as a kernel parameter? I do not even know whether this is the proper solution.

View 2 Replies


ADVERTISEMENT

Fedora :: Screen Flickers While Using F12?

Mar 21, 2010

im still pretty new to linux and have been using it since december. lately the screen keeps blinking. almost like the screen is going out. this only happens while it uses the fedora from my hard drive. the screen acts just fine while in the BIOS and when i boot from the live CD its all smooth. but when i boot from my hard drive, as soon as fedora starts to boot up its starts blinking and flickering again. im running a virus scan right now with clamtk.

not sure if this is relevant or not but: 2 days ago my friend had a worm virus shutting down her laptop. so i backed up her important files and photos on a thumb drive, formatted and reinstalled her vista for her. during the installation of windows i popped the thumb drive into my laptop (fedora 12) and imediatly did a virus scan with clamtk. no viruses found.

View 14 Replies View Related

Fedora Hardware :: LCD Screen Flickers / Suspend The System Once For The Flickering To Stop?

Jul 13, 2010

I have this situation: I installed F13 on my laptop having an Intel Graphics Media Accelerator. The screen of my laptop was flickering and i did a 'yum update'. The flickering didn't stop, but after suspending the system once, the flickering stops and everything is fine. Now after each reboot i have to suspend the system once for the flickering to stop. Please help.

After discussing in #fedora in freenode, some people asked for these (i'm posting in case you need them too):

$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)

/var/log/Xorg.0.log -> url.

View 2 Replies View Related

Fedora :: Gnome 3 & Skype - Screen Flickers - Looks Crappy - Takes Ages To Refresh

Jun 8, 2011

I have laptop with Mobility Radeon HD3200 graphics. Gnome 3 works more or less fine until I start Skype. When Skype is running switching between the windows is a pain in the a$$. The screen flickers, looks crappy, takes ages to refresh, etc. Anyone experience similar things? I also noticed that when I start yumex I also get the screen doing the same things as with Skype, but to a much lesser extent and only for a few seconds. Could it be related to the network connection? Running F15 64

View 4 Replies View Related

Ubuntu :: Unable To And The Screen Flickers A Bit And Shows The Login Screen

May 31, 2011

I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.

What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.

View 5 Replies View Related

Fedora :: KDE4 Forgets Screen Resolution After Log Out?

Feb 14, 2010

I am using Fedora 12 with KDE4 and when I logged in to my KDE desktop for the first time, the screen resolution was 2048x1536, which was unusable for me. Therefore I set the screen resolution to 1280x1024 through the System Settings > Display in KDE4. However, whenever I log out and back in, the resolution falls back to 2048x1536. When I go to System Settings > Display to set it right, as soon as I click the Display button in System Settings, before changing any resolution, the screen falls back to the 1280x1024 setting

View 2 Replies View Related

Ubuntu :: Screen Flickers And Goes On And Off

Mar 13, 2010

I have been (in retrospect) screwing around with drivers and various packages in Synaptics on a Fujitsu Siemens ESPRIMO Mobile, which has a SiS graphic card. Now I get a normal boot up until about 5 seconds after the Ubuntu-mark shows up in the middle of the screen. After that the screen flickers and goes on and off, without any results. This just continues forever, without any solution. I have tried the recovery mode, and tried to remember which packages I installed, and then tried to remove them, without success. Any tips on what to do, except reinstall?

View 1 Replies View Related

Ubuntu :: Getting A White Screen That Flickers On And Off

Oct 29, 2010

Recently I've keep getting a white screen that flickers on and off, on my Samsung NC10 netbook.

It only seems to happen when I'm running off mains power, and screen brightness is 100%. Stops when I lower the screen brightness.

View 1 Replies View Related

Ubuntu :: Login To Xfce The Screen Goes Black - Flickers A Few Times Then It Brings Back To The Login Screen

Apr 12, 2011

My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.

I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.

View 1 Replies View Related

General :: Ubunto 10.10 Install/Screen Flickers

Apr 5, 2011

I burned Ubunto 10.10 to a disk and when it goes to load I can see the Ubunto load up and ask me what language I want except the screen flickers like crazy.

my video card: ATI Radeon HD 5700 series

here is the link to the short video: [URL]

View 5 Replies View Related

Ubuntu Installation :: Live CD Screen Flickers Continuously On 10.04.1

Aug 28, 2010

As the title says, when I select the install option on the liveCD, the Ubuntu logo is shown, and the flickering starts. I've tried the vga=XXX option, but no luck. Any experiences? It doesnt' happen with the 9.10 live CD...

View 3 Replies View Related

Ubuntu :: Splash Startup Screen Flickers And Crashes?

Dec 27, 2010

I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.

And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.

View 1 Replies View Related

Ubuntu :: 10.10 - Some Applications Not Starting - Virtualbox Just Flickers The Edge Of The Screen

Oct 24, 2010

I have a strange problem with some applications in 10.10. This applies so far to virtualbox and skype. When I try to start them, nothing happens. Virtualbox just flickers the edge of the screen. Virtualbox has worked before, and i'm reluctant to delete it as I have another machine installed. Skype has never worked, and even when I have reinstalled, the same happens.

View 2 Replies View Related

Ubuntu :: Sometimes When Resuming From Suspend - Screen Flickers With White Lines

May 29, 2011

I've been away from Kubuntu for a while but came back when Kubuntu 11.04 was released because it's awesome. I have a newer laptop since then, a Latitude E6410 with Intel graphics and 8GB of RAM. Everything works great, except......Sometimes when I resume from suspend to RAM, the screen flickers with thin white lines across the screen. I can switch to a tty and reboot it from there, but I'm unable to use KDE until I reboot. A lot of times resuming from suspend works without issue, but sometimes this problem occurs. I haven't figured out exactly what triggers it. In fact, the most recent time it happened, I didn't even have an application open.

I would like to figure this out because I use suspend a lot. I rarely turn off my laptop unless an update requires me to. I prefer to be able to close my lid and resume whatever I was working on later, but with this glitch I cannot trust it to do that.

View 5 Replies View Related

Ubuntu :: Sony VAIO VGN-NW350F And Every Few Minutes A 1-inch Strech Of Multi-color Quickly Flickers On The Screen?

Sep 8, 2010

I recently installed Ubuntu 10.04.1 (64-bit) on my Sony VAIO VGN-NW350F and every few minutes a 1-inch strech of multi-color quickly flickers on the screen. It almost looks like a bad hardware connection but I do not have this problem when running Windows. I am currently running at 1366 x 768 at 60 Hz.

View 2 Replies View Related

Debian Multimedia :: Squeeze KDE4 Flickering Screen

Dec 22, 2010

I updated my system as usually. Sadly since then my screen flickers every 10 (or so) seconds. It turns black for like 10ms and then back to whatever it showed before. This behavior occurs after some uptime. Haven't measured the flicker-free time span yet but I guess it starts after 15 to 30 minutes.I'm using a up-to-date Squeeze with KDE4 an the nvidia-driver for me GeForceGo. Interesting thing is: It does not flicker while using fluxbox using same xserver.

View 1 Replies View Related

OpenSUSE :: Screen & Keyboard Freezes Often - SuseLinux 11.3 - KDE4

Mar 25, 2011

i installed suselinux 11.3 on my lenovo t410 and i am using kde4. since then, i have the following problem: the screen freezes suddenly and the keyboard doesn't work anymore. i can move the mouse cursor, but clicking doesn't work. funny enough, the sound still works. the only way to restart the laptop is by pushing the power button for 10 seconds.

so far, there was no real pattern about the 'when does that happen?'. it happens sometimes when i am surfing on 'innocent' webpages like wikipedia or spiegel.de, not very often while watching videos. once it happened when i was only using kile for latex. it happened while i was experimenting with kdenlive. another time when i opened 2 vcl player in order to watch 2 videos simultanously.

sometimes there are days without trouble, sometimes i have to restart the laptop 5 times (like today...). is there a way to find out what is actually wrong? and how to get rid of the problem? (how do i create a proper bug report of these incidents?)

View 4 Replies View Related

OpenSUSE :: KDE4 Screen Edge Actions With Two Displays?

Jun 8, 2011

Are KDE4 Screen Edge Actions supposed to not work in multi-display setup? I have two displays and Screen Edge Actions define and nothing happens when I move the pointer to an edge or a corner of the main display.

View 5 Replies View Related

Ubuntu :: Tiny Font In KDE4 Login Screen After Logout

Jan 22, 2011

I am using KDE4 on 10.10 64-bit.

Only ever use the KDE desktop so completely removed XFE and the rudimentary Gnome left behind on the install.

Not a desperate problem just an annoyance.

Everything works fine, except if I logout the next login screen is using a really tiny font and I can't seem to find anywhere to change it.

The DPI must be about 10, as I can't even read it when blown up on my projector.

View 1 Replies View Related

General :: Change Login Screen In Mandriva 2010 KDE4?

Feb 12, 2010

I am trying to change the login screen from "Configure Your Desktop>Advanced>Login Manager".When I go into the login manager, everything is grayed out,you cannot change anything.I have to change it as root but I don't know how to do that. Therefore I need help regarding that. I did google searching but it was not of any help because they were for previous releases of mandriva or other distros which didn't apply to my case.

View 4 Replies View Related

Fedora :: Installed Kmod; Now Can't Get To Login Screen?

Feb 24, 2010

I installed Kmod just earlier today. I also updated everything else today. After i rebooted, the text boot said "enabling nvidia driver [ok]", but it never leaves the text boot! It freezes after "Registering binary handler for Windows applications: [ok]".

What can i do!?

View 9 Replies View Related

OpenSUSE Install :: Keyboard Is Dead At Logon Screen (GNOME, KDE4 Etc.)?

Nov 23, 2010

I have updated my 11.3x64 recently and after updateI cannot log into any X session.Keyboard is dead but mouse is moving fine.I tried to change kdm to gdm - no result!All I can do now is - select by mouse "Console Session"and log in to common terminal. In terminal session keyboard works.I can't understand What is it?The most interesting:If I run terminal as a root and run startx - kde desktop is started but the same way - without keyboard!Hardware manager (YAST) shows: /dev/input/event0and shows type of keyboard right: AT Keyboard bla-bla-bla. (Common Genius PS/2 keyboard for 6$ :-))I suspect something wrong with my X11 but can't get what!I did not find xorg.conf in it's standard place. I have found only /etc/X11/xorg.conf.install

View 1 Replies View Related

Software :: Installed Fedora 13 X86_64 And Unable To Hibernate - Screen Just Goes Dark

Jun 11, 2010

I've installed Fedora 13 x86_64 and am not able to hibernate (though suspend works fine). This is the case either with or without the proprietary Nvidia drivers from rpmfusion. When I click System -> Shut Down -> Hibernate, the screen just goes dark. Moving the mouse activates the display and the password confirmation box appears. Judging by the disk activity light, nothing is written to disk. Swap space is configured correctly.

Looking at the last few lines of /var/log/pm-suspend.log I see this:

It looks like grub (or the absence of grub.conf) is interfering. Problem is, I'm not even using Fedora's grub to boot the system. I'm dual booting with Ubuntu 8.04 and am using that grub. The section from that grub's menu.lst is:

But of course Ubuntu 8.04 is pre grub2 so how do I satisfy Fedora's grub.config without messing this up?

View 1 Replies View Related

Fedora :: NVidia And Compiz Installed And Working But Screen Doesn't Refresh Correctly?

Oct 30, 2010

What it does is, if you do something to change anything on the screen, for example, highlighting text, or switching from one tab/menu in an application to another. The screen doesn't show the change. The only way to SEE the change is to do something else to the screen, like grabbing and moving the application around, or scrolling the page of a website, etc. If you don't do that, you won't see what's really on the screen, but rather what WAS on the screen.

Another example:

*) say you have an application open with 3 tabs: tab1, tab2, and tab3.
*) Switch from tab1 to tab2 and you see no change on the screen.
*) Switch from tab2 to tab3 and you see tab 2 on the screen, NOT tab 3.
*) Switch from tab3 to tab 2 and you see tab3 on the screen, and NOT tab2.

Or, if you're typing in this box to make a post, and you hit ctrl+a to select all, you see no change. If you click in the box to deselect all, then it looks like you've selected all text still. The only way to see what's currently on the screen is to scroll the text box or page just a bit, or, if you're using an application, then you'd have to move it around on the screen a bit.

As i've said, the nVidia drivers are installed and working, as well as compiz, etc.

Code:
[=v=]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02)
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)

[Code]....

Also, i did BOTH the dracut thing, and the extra kernel paramter in the grub.conf. So, nouveau is blacklisted. Oddly enough though, i do NOT have this problem when using the nouveau driver...

Also, fwiw, i think that i should mention that i'm not using the "Desktop Settings > Enable Desktop Effects" method, because i always seem to have problems with getting certain features to work, like the background for the cube skydome, etc. How i do it is that i install a package called compiz-manager, and i have it set to run at session start. This makes all of the compiz features work fine. One thing that i've noticed though, is that on my other workstation, i haven't set that up yet, and it seems that is is NOT having the same issue. While compiz-manager was running, i tried to use the "desktop settings" method, and it crapped out and reverted back to the old school desktop. I then tried it again, and it reloaded compiz, and there is no screen update issues now. So it seems that you have to have both of them running in order to get all of the compiz options to work, and not have the screen refresh issue?

View 9 Replies View Related

General :: Installed Fedora 13 - Blue Screen Something Called Grub And Windows Is Not Listed

Oct 5, 2010

I installed Fedora13. But my Windows is Gone. I followed Next-->Next and completed installation after 1 hour. When i restarted the system, isaw blue screen something called grub and windows is not listed. I had important data in it where did it go?

View 14 Replies View Related

OpenSUSE Install :: Login At KDM (KDE4), The Monitor Goes Black And Returns To The Login Screen?

Nov 17, 2009

My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?

View 5 Replies View Related

Fedora :: How To Set Wallpaper In KDE4.4

Mar 22, 2010

Just installed KDE4.4 from a Fedora 12 Gnome installation and can't see anything when I right click on the desktop, no cashew either.

View 9 Replies View Related

Fedora :: Netbeans Has Bad Fonts In Kde4

Nov 28, 2009

I want to improve the ugly fonts in netbeans 6.7.1 on Fedora 12. I tried adding this to the start options:

--laf com.sun.java.swing.plaf.gtk.GTKLookAndFeel

via the netbeans.conf

from some posted hints on the internet but it doesn't seem to help. I'm using the latest KDE4 (4.3.3-3) on Fedora 12 and openjdk

Code:
$> java -version
java version "1.6.0_0"
OpenJDK Runtime Environment (IcedTea6 1.6) (fedora-33.b16.fc12-x86_64)
OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode) .

[Code]....

View 3 Replies View Related

Fedora :: Kde4 Appearance Settings Is Gone?

Mar 2, 2010

I just upgrade kde4 in fedora 12 and the right click option for "appearance settings" is gone!

View 1 Replies View Related

Fedora :: Where Are The Kmail Folders Stored In KDE4

Aug 12, 2009

I will be re-installing Fedora and want to back up my mail files. I can't find the kmail files on Fedora 11 KDE4

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved