i'm unable to get the cisco vpnclient installed on lucid 10.4.I have tried a few guides from the 9.05 and even 8.10 but most of them require patches that are for them kernal versions i'm unable to find anything for 10.4 patch wise. anybody come across this yet and more importantly did you win ?
View 1 RepliesI am trying to compile the Cisco vpnclient on my Opensuse 11.2 and (after some troubles) I got the module compiled and installed but when I try to load with insmod I got this error
<</etc/init.d/vpnclient_init start
Starting /opt/cisco-vpnclient/bin/vpnclient: insmod: error inserting '/lib/modules/2.6.31.12-0.2-default/CiscoVPN/cisco_ipsec.ko': -1 Invalid module format
Failed (insmod)>>
I am able to use the vpnclient forcing the module with modprobe -f cisco_ipsec but I'd prefer to solve the 'invalid format' original problem. I 'googled' around and it seems related with this warning during vpn_install script "WARNING: Symbol version dump /usr/src/linux-2.6.31.12-0.2/Module.symvers is missing; modules will have no dependencies and modversions." I have these rmps:........
I am trying to configure and connect Cisco VPN on Ubuntu 10.04. I've imported .pcf file. The new vpn conn appears in the VPN Connections option. Now when I select it, it doesn't connect. Nothing happens. I am not able to connect to VPN at all. I tried using kvpnc as well but it didn't work either.
View 1 Replies View RelatedI'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.
Ubuntu distribution : Hardy Heron (updated)
Desktop Environment : wmii
lsusb :
Code:
Bus 007 Device 006: ID 1737:0077
Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
[Code]....
Tried startup with device connected, no success.
Read some threads which generally correspond to version 2 of the device.
It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.
I have installed kvpnc and loaded my profile using a .pcf file but seems not to be able to connect. the error I get is: error: The required daemon (vpnclient) is not available, connect will be disabled. I tried looking for vpnclient in the repo and over the internet but seems to be unavailable.
View 8 Replies View RelatedRunning fine for a couple of weeks now, my Ubuntu Lucid install on a Sony laptop Vaio VGN-N21E went through some updates an hour ago. After the updates were installed, I shut the laptop down. The shutdown was slow but graceful with no errors. Now, when I try and power back on, I get errors about CIFS stating that the network share I map to could not connect. Also, that the network could not connect. I usually connect wirelessly and had no problems until now. It lets me log in but freezes after I see my desktop. No cursor or keyboard response...no response to CTRL+ALT+DEL...I can only manually force shutdown....
View 9 Replies View RelatedI am running usb version of lucid 10.04.2, with many apt-get installs. Shortly after running awhile, programs will not run, I get either an "input/output error" or "Bus error (core dumped)". (Examples of programs rendered inoperable are top, df, file)
I've read something about a memory leak in Lucid, but in my case, the computer doesnt slow down, things just stop working. Is this a known problem with Lucid? I'm thinking maybe one of my apt-get installs corrupted something. Is this a known problem that has a software update available?
Here is the output of "top" which fortunately currently DOES work, while other progs don't. (the memory usage stays constantly in that 1.5 GB range)
Mem: 3056772k total, 1554952k used, 1501820k free, 173004k buffers
Swap: 0k total, 0k used, 0k free, 1081808k cached
I just did the upgrade and I want to turn off the display after 30 minutes. I check that selection but the display does not turn off after 30 minutes. It is still on. I enabled this setting through the power management. The screen saver is on, go to blank display but the monitor does not turn off.
On Windows, dual boot on the same machine, the monitor does display off. I don't know if this is part of the problem or not, but when I go to "System -> Preferences", there are two different "Screensaver" options.
Was wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
I get 3-4 clicks every minute, until I realized the problem and installed "laptop-mode-tools". After that things are back to normal.Why isn't laptop-mode installed by default in Lucid? This is a simple work-around which should be imposed by default, so users' hard discs won't be damaged.
View 1 Replies View RelatedI just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
Today I was trying to clean up my system and am a little bit stumped on something.
I used synaptic to clean up installed kernels, except for the one that was currently running. Once done I went ahead and restarted my computer.
Grub lists only one kernel available. However when I go to a prompt and
issue dpkg --list|grep linux-image I get several items listed code...
2.6.32-22-generic is the kernel I am running so I assume the "ii" files have something to do with the kernel in memory.
However, what are the "rc" files that are listed? Resource files? All three kernels referenced have been removed a LONG time ago and when I look for installed headers, or anything else, there is nothing installed for *-12, *-12 or *-14.
And when I check Synaptic for just the kernel number I get a list of packages with no version install, no latest version notation and no description (attached screenshot).
Just what are those references and how does one remove them?
is there anyway to get zenity 2.32.0 installed on lucid besides compiling it from source? because i noticed it was available for maverick.
is this version likely to be available for lucid?
My system won't boot unless I have 2 sata drives. It doesn't matter what's on the second one. It even boots if the second "disk" is a powered sata to IDE adapter attached to an unpowered IDE drive.If I don't have the second drive I get this when I try to boot:
Alert! /dev/disk/by-uuid/ ...<your UUID>.... does not exist,I don't see anything that seems odd to me in my /etc/fstab file.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0[code]....
I've done the whole use a live disk, chroot into my system and reinstall the kernel to no avail. uname -r gives -- 2.6.32-28-generic
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
I upgraded to Lucid last night, and I'm getting this error when I try to run virtualbox-ose:
Quote:
Kernel driver not installed (rc=-190 Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
I try it, then I get:
Quote:
modprobe vboxdrv
FATAL: Module vboxdrv not found.
I have no idea what's going on. Can anyone help? The version of virtualbox is 3.1.6-dfsg-2ubuntu2
yesterday I've decided to upgrade ubuntu from hardy to lucid on my poweredge server.
unfortunately, I've found an error that I'm not able to solve:
Code:
sudo apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies View RelatedShort story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I am rather irritated right now. I managed to install kde 4.5rc alongside gnome 2.30. And the 1st impression is barely ok. It seems stable and fast, but because wi-fi doesn't work for me, it's really limited in where it can go. Considering I'm typing this logged in thru gnome on the exact same system, connected to the wi-fi network kde refused to connect to, it's rather baffling. Update: Used networkmanager-gnome to get me connectd in before I login since network doesn't use security (even gnome doesn't play well with that.
KDE issues (some from 4.4.2 and still in 4.4.92). Plasma:
1.Tooltips aren't persistent, they shy away after a few seconds. Also they should update with data they're representing (yes system monitor, I'm looking at you);
2.Allow setting of colours for graphs e.g. ram monitor, cpu monitor. Was there but now gone;
3.A more convenient way to exit the plasma dashboard (right click on background perhaps?);
4.Individual wallpapers per desktop; (again, there before in 3.5)
5.Panel auto-hide show delay still not adjustable; choice for fade-in animation;
Kwin:
1.The present windows effect wastes a lot of space under 'natural' without 'presenting' the windows optimally; other setting (fixed & flexible grid) make programs like audacious look utterly horrible; the placement algorithm needs to be sorted;
2.Oxygen menus have too much border, give impression of bloat;
3.Kwin compositing freezes everytime I change decoration, style, font, etc. Have to use key shortcut to disable then re-enable. This is somehow connected to my system using more swap as time goes on, while mem usage remains ~40% (of 2gig)
Dolphin:
1.Ability to show basic media file metadata without need for nepomuk (as was possible in konqueror in 3.5.x), e.g resolution of jpeg/png/bmp images, id3 info from mp3/ogg/wma files; pdf [this marked as done in the feature plan, yet to see it)
2.More columns for sorting in details view (windows explorer excels in this). Above point will be needed before this is possible;
Amarok (2.3.1):
1.Still no proper use of album artist tag (for compilation albums and such) and/or proper detection of various artists listed in the 'artist' tag;
2.All embedded album art is useless;
3.Album art isn't shown prominently in the collection browser (22px crap doesn't count, the art itself is >300px);
4.Can't queue files from collection. Can queue from playlist, albums applet but not collection. Why?;
It is a stable pre-release software but stable can only get us so far. The basic features users have clamored for aren't being provided, resulting in my playing music with banshee and viewing my pics with geeqie.
A clean install on an all linux AMD desktop machine. Problem is lucid will not shutdown. All that you can see is the background staring at you for good.
I have not had the guts to install fglrx either.
Some software I did install:
I am trying to install LibreOffice 3.3 by following the instructions I found at [url]
Below is the output I get after running these commands:
Code:
Output:
Code:
Code:
The following packages have unmet dependencies:
I am running Ubuntu 10.04 and I have OpenOffice installed. Is it possible to install LibreOffice 3.3 from PPA even though it is said that the commands target Maverick? Do I have to uninstall OpenOffice before installing LibreOffice?
I have downloaded 64bit desktop CD Iso installer form ubuntu site. when i boot the live CD, i get the first black screen of keyboard and man symbols at the bottom. then the ubuntu splash screen and it is stuck there for ever. also my HDD activity is over since no CD derive blinks and HDD led blinks. if i press CTRL+ALT+backspace i get a text screen with several error messes most of them input output error and errors like unable to create /tmp. I will attach a pic shortly..
View 4 Replies View Related1. Sometimes when I try to shutdown my computer the display becomes filled with pixels of different colors as shown in the image (The problem is very random so I was not able to take a photo, I tried to recreate the effect using GIMP). Then the display turns off (Analog power saving mode) But my system never turns off.
2. While working on my computer the display sometimes goes kaput and blinks as in the second image. It stops responding completely I am not even able to go to terminal (Ctrl + Alt + F1). Leaving me with no option but to use the reset button. Causing me to loose all the work in progress.
3. Firefox responds very slowly upon closing it takes 5-6 seconds for the window to close.
PS:- KMS is also disabled in my system. Enabling it didn't improve stability. and here is the output of my videocard (lshw)
*-display UNCLAIMED
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[code]....
I've tried installing mysql-server on Lucid, and I get errors that it cannot set the root password. A screenshot is attached.
I have no idea what to do. I've tried purging configuring and reinstalling. Same problem. I can't find anything in the logs.
I recently ran "sudo apt-get autoremove" in the terminal and I was given an error message citing the following:
I believe this is a result of a failed Banshee Media Player installation that left the specific package installed. I ended up removing Banshee entirely. I have tried using Synaptic Package Manager and Computer Janitor to remove the package, but neither has worked, both returned the error exit status 2 message. Computer stats are in my signature.
I can find various information on the tinterweb about configuring a Logitech MX1000 under various old releases of Ubuntu, but I can't find anything relevant to Lucid Lynx.
View 2 Replies View RelatedI am trying to set up Vista on my Lucid within VirtualBox so I can run 3CX IP PBX. I have installed the virtualBox and set up a virtual space called "Vista", but when I start it (Power on) I get an error message - see screenshot enclosed. If I run the command
HTML Code:
'/etc/init.d/vboxdrv setup'
as instructed in terminal I get.
HTML Code:
root@server:/home/server# /etc/init.d/vboxdrv setup
WARNING: All config files need .conf: /etc/modprobe.d/dahdi, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/dahdi.blacklist, it will be ignored in a future release.
[code]....
Can't install sp-auth code...
View 6 Replies View RelatedAfter correcting my grub bootloader problem earlier, I seem to be running into a different problem. I am unable to boot Lucid Lynx, either through recovery mode or normal boot. In recovery mode, I get the following message:
Code:
ata4: SATA link down
It then goes on to tell me, after a long wait, that it's unable to start TTY, and shows a (initramfs) prompt.