CentOS 5 :: Installed But Unable To Start
Dec 19, 2010
The pc has 3 disks sda and sdb not partitioned (for future raid use, the first 3 disks are hot pluggable) and sdc (on sata port 4) with
sdc1 for /boot (shared)
sdc2 set to swap
sdc3 extended
sdc5 for another linux distribution
[Code]....
I have installed without any problem but at time to configure the bootloader the only choiches are sda or sdc1.
I have also lilo installed on the mbr so i have added in its configuration the image and the initrd of centos with root configured as /dev/sdc6.
In every case the system stat, try to find raid devices, try to resume from sdc4 (this will be another problem in the future, I need to disable this), and later hal with a kernel panic unable to find root.
I think the kernel command line parameters are not correct but seriously i am not able to find them.
View 4 Replies
ADVERTISEMENT
Jan 13, 2010
I would like open again a Thread regarding NX. Now I removed CentOS 5.2 and installed CentOS 5.4, it seems thats the better one, because here is yum working again,The problem: I cant start nxclient, but the file is installed>
[root@node5 bin]# ls -la
total 6304
drwxr-xr-x 2 root root 4096 Sep 24 13:59 .
drwxr-xr-x 5 root root 4096 Sep 24 13:58 ..[code]......
View 5 Replies
View Related
Oct 18, 2010
# startx
xauth: creating new authority file /root/.serverauth.18174
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
[Code]....
Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. Couldnt get a file descriptor referring to the console
i have used these commands also
mknod /dev/tty0 c 4 0
chmod 660 /dev/tty0
View 1 Replies
View Related
Oct 19, 2010
# startx
xauth: creating new authority file /root/.serverauth.18174
X Window System Version 7.1.1
Release Date: 12 May 2006
[Code]....
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. Couldnt get a file descriptor referring to the console
i have used these commands also
mknod /dev/tty0 c 4 0
chmod 660 /dev/tty0
View 2 Replies
View Related
Sep 22, 2010
I have upgraded from Centos version 4.x to 5.5 and my installation of UGS NX 6.0 was installed under Centos 4. NX was working fine in Centos 4, but when I try starting it under Centos 5, I get the following:
ERROR: unable to start NX Check: X windows is running, :0.0 is valid, and X display has been authorized on :0.0.
View 4 Replies
View Related
Jun 10, 2009
using centos 5.2
unbale to start ldap server.
see below info
[root@system ~]# yum install openldap
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base:
[Code]....
View 5 Replies
View Related
Jan 14, 2011
after installation update centos / I tried to open the OX EE/ I am not able to start the web-frontend in Firefox. The message "You need to enable JavaScript to access the Open-Xchange Server."
View 3 Replies
View Related
Nov 28, 2010
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
View 6 Replies
View Related
Jul 23, 2009
I have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
View 4 Replies
View Related
May 28, 2009
I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address
eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1
When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"
I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct
GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none
[Code].....
View 2 Replies
View Related
Oct 5, 2010
In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
View 17 Replies
View Related
Aug 25, 2009
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
Apr 3, 2009
I am trying to put up my own Quake2 server to play with my friends. During this installation process I have encountered rather confusing issue. First I downloaded the Q2 server binaries in RPM package and tried installing it:
[Code]...
View 5 Replies
View Related
Jul 8, 2009
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies
View Related
Nov 10, 2009
I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
View 2 Replies
View Related
Jun 3, 2009
I am having trouble logging into a newly installed CentOS 5.3 box. I can SSH into the machine with root but can not do so with any normal users. I get the error, "connection refused." My firewall is currently turned off.
View 12 Replies
View Related
Sep 13, 2009
Such as kiba-dock , SimDock. I can't install these softwares on CentOS 5.3 64, since too many libraries need to be upgraded. The default panel is not so good.
View 18 Replies
View Related
Jan 19, 2010
I am trying to get the wireless enabled in my laptop. Following is the dmesg log I get:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[code]....
View 3 Replies
View Related
May 3, 2011
I've just installed Ubuntu 11.04 on the same harddrive that I already have Windows XP on, but on a different partition, and now it won't start. I've installed it with a USB-stick after I split the harddrive. When I turn on the computer, it goes directly to XP, so that tells me it should be a problem with the bootloader?
View 1 Replies
View Related
May 11, 2011
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
View 5 Replies
View Related
Aug 21, 2009
I installed updates a few days ago and now my computer just hangs. After the blue and white bar at the bottom of the screen disappears when loading F11, I get a blank screen with the following: ADDRCONF (NETDEV_UP): wlan0: link is not ready. I think this happened after I had some kernel updates installed. The only way I can get Fedora to run is by booting up with a previous version. How do I fix this? I seem to be having alot of issues with updates messing up some part of my system lately.
View 14 Replies
View Related
May 13, 2011
I install Fetchmail but how can I start Fetchmail ?
View 8 Replies
View Related
Feb 5, 2011
I have a media centre running mythbuntu 10.10, with an Athlon X2 2400 in it. I've just replaced my aging nVidia GeForce 6200 with an nVidia gt430. After restarting the box with the new card in it, and an old VGA monitor plugged in X won't start properly. It fails with "Screens found but no valid configuration" or similar. I removed the old xorg.conf and tried restarting, and it will actually go into X, but when I try to run nvidia-settings, it tells me I'm not using the nVidia driver.
I then tried deactivating the nvidia driver and reactivating it, then using sudo nvidia-xconfig, but when rebooting I get the same error as above. dpkg-reconfigure xserver-xorg seems to no longer do anything i.e. if I delete xorg.conf and run this, no new xorg.conf is generated. I'm at a bit of a loss as to how to get the new video card working properly. I'm going to put the box back together and plug it back into the flat screen tv and see if it all works. no xorg.conf allows me into X, but without being able to configure with nvidia-settings. running nvidia-xconfig gives me an xorg.conf, but won't allow X to start...
View 3 Replies
View Related
Jun 16, 2011
i cannot start a newly installed 11.04, i installed the boatloader into the root partition because i use another bootload called boot-us which start from its own partition, this worked fine with other ubuntu versions, but now i got the following errors after i try to start ubuntu with grub:
error no such device following a number
error no such disk
error you need to load the kernel first
View 3 Replies
View Related
Dec 7, 2010
I have installed CentOS 5.5 but i have no Internet what could i do so it is working ?
View 1 Replies
View Related
Aug 7, 2010
I have xp, vista and w7 installed on my pc's hard disk. I installed ubuntu 10 on the usb disk but I dont see how to start it.
View 5 Replies
View Related
Mar 27, 2010
I have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed
1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx
[Code]...
View 11 Replies
View Related
Jul 8, 2010
I just removed the gnome from the ubuntu 9.10.then i reninstall the xfce4.i am invoking the xfce4 by typing#startxi want to start the xfce4 as usual like the gnome did automatically by asking login window.
View 2 Replies
View Related
Jun 16, 2011
The setup: 2 identical boxes running Fedora Core 15 2.6.38.8 kernel, 64bit that Im trying to setup in a cluster using luci.
So far: Managed to create the cluster.conf file, defined the nodes with hosts and such.
The problem: When I try to have the 2 nodes (nod1 and nod2) join the cluster via luci's web interface, I get
"Starting cman: Job failed. See system logs and 'systemctl status' for details."
When I check code...
Now. I know that cman service is installed. I even tried removing and reinstalling the whole thing, dependencies and all, but it just won't start and I've run out of ideas.
View 3 Replies
View Related
