Red Hat :: Unable To Login Into Box?
Jan 14, 2010
I am able to login into my Linux server via DRAC using my username and password. But when I tried to login into same box from putty i am getting login prompt when I entered login name and the password it is giving below error. I am using same credentials where I am using DRAC console
View 12 Replies
ADVERTISEMENT
Oct 10, 2010
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
View 1 Replies
View Related
Mar 13, 2009
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies
View Related
Mar 15, 2010
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
View 9 Replies
View Related
Sep 30, 2015
I have an iMac G4 that I installed Jessie on successfully. However, when it boots, one of the last messages is:
[FAILED] Failed to start Load Kernel Modules.
Last line is something along the lines of:
fb: switching to nouveaufb from OFfb NVDA,NVMac
And then the text starts dissolving, and the entire screen cycles through different colors. I presume it is sitting at the graphical login prompt but it's not displaying correctly.
Based on some Google searches, it seems like I should be able to resolve this by editing /etc/modules but I can't get to that point. I have tried to get to a terminal using ctrl-alt-F1 through ctrl-alt-F12. No luck. I tried different yaboot options that were supposed to avoid using the video driver. No luck. How do I get the machine to boot straight to a regular text login instead of the X one?
This machine worked fine running Mac OS X this morning, so I don't think it's the hardware. What I can do.
View 10 Replies
View Related
Apr 21, 2010
I am using rhel 5.3. I am using windows 2003 server 32-bit (the processor is 64 bit. AMD athlon x2). I have installed vmware and installed rhel5.3 64 bit on top of it. Now i am able to login as root from GUI mode (f7 console), but unable to login in text console from f1 to f6. I checked the /etc/securetty. But there was nothing unusual there. I think udev is causing this problem, since google said so. I cant find where the udev.rules file is located that google searches are taking about. How do i enable root login in f1-6 console.
View 4 Replies
View Related
Jun 2, 2010
When tried to login from login screen it gives a message "Permission Denied" for all users including Root.So i tried it from recovery mode im able to login as root but has no permission to change any thing.
View 1 Replies
View Related
Jan 3, 2011
I have just installed Fedora 13 but unable to login through root though users can login.
View 2 Replies
View Related
Feb 15, 2010
I'm using fedora 12 along with Windows XP the problem is I'm unable to login as root but I'm able to authenticate with the same password as another user.
View 4 Replies
View Related
Aug 9, 2010
I am unable to login following an update, Fedora 13. The screen splashes after crond is loaded. The GUI does not come-up. In text mode i can't login as root or other user accounts except in kernel 1. I can access some files via FTP command. Is the password file corrupt ?
View 14 Replies
View Related
Nov 15, 2010
I am using fedora 10 and I was downloading F14 by torrent. By 90 % I stopped it and shut my system now when I am going to turn on my pc unable to login my kde desktop. I am getting some message like this
Code:
/: Contaisn fail of a file system withe errors. check forced.
Unattached Inode 1440243
/: UNEXPECTED INCONSISTENCY RUN 'fcsk' MANUALLY
[FAILD]
Run 'setenforce 1' to reenable
I think my s7stem currupted but I am unable to rescue as I did last time.
View 7 Replies
View Related
Jan 16, 2011
I got the following problem, when I try to login in into terminal and I write any correct user and its password and the following message is displayed "Module is unknown" and it doesn't get into the prompt.I don't know what else to do I am little lost about this question. Probably it could be something related to pam configuration or something like that.
View 10 Replies
View Related
May 29, 2011
I installed the Syncrify server and client on a Linux box. From what I've read on their site, Syncrify comes with a built in self-signed SSL certificate. However after setting the SSL port on the Syncrify Admin Set-Up, I am still unable to login with a client through SSL. This works: (5800 is the default port for HTTP)[URL]...
However the following do not work:[URL]...
View 1 Replies
View Related
Feb 7, 2010
I have used Ubuntu 9.10 for a few months. I like it because it seems faster than Windows XP or Vista. Nevertheless, it has happened many times that I couldn't log in Ubuntu after an update. I thus had to uninstall Ubuntu from Windows and reinstall a clean copy of Ubuntu again.
1. Is this common to you guys or just me alone?
2. What are the causes?
3.Does Wubi play a role in causing this login problem since I install Ubuntu thru Wubi?
4. What are other solutions in solvng this login problem?
View 4 Replies
View Related
Apr 2, 2010
For some reason I am no longer able to log into my Ubuntu 9.10 system. I get to enter the password and it accepts it, starts to log me in but then throws me back to the login screen again without even a glimpse of the desktop. What could be causing this? Everything was working fine yesterday and I haven't made any changes to the OS.
View 9 Replies
View Related
Apr 26, 2010
I've tried to test 10.04. One, by upgrading a working KK installation. The other, was a fresh install. Both were as VMWare virtual machines.Both installs had the same problem. The install/upgrade process goes smoothly. When the GUI logon screen appears & I click on the user name, I'm unable to type in the password box. Nothing appears. If I then click "continue", the result is "authentication failure".
View 2 Replies
View Related
Jun 13, 2010
I have a problem using Ubuntu 10.04. When I try to login, the screen turns black or white for a second and then returns to the login screen, without giving any error. Logging in in tty1 works fine though.
I have already tried some commands that might be of use. "sudo gdm" gives the following error:
Code:
/etc/profile: 29: [[: not found
** (gdm-binary:2265): WARNING **: Failed to acquire org.gnome.DisplayManager
** (gdm-binary:2265): WARNING **: Could not acquire name; bailing out
"gdmsetup" gives this:
Code:
(gdmsetup:2272): Gtk-WARNING **: cannot open display:
View 9 Replies
View Related
Jun 25, 2010
I am running Ubuntu 10.04 from an external hard drive. I am able to get to the GUI login and enter the correct user/password combination. However, one I push enter it cuts away to a blank screen then returns to the login screen as if nothing happened. This doesn't happen if I log in without GUI (using alt+ctrl+f1 (or any other function key but 7).
Can someone tell me what is going wrong? I am still able to access my files from the hard drive by booting from a live CD if that matters at all.
View 7 Replies
View Related
Sep 1, 2010
I had a mysql package that wouldn't install correctly and was informed that the fix was to install dtc. Well I installed dtc and everything appeared to go fine. I now can't log in as any user and the only way to get back onto the system is in repair mode. Even uninstalling dtc with purge doesn't help.What do I have to do to fix it so my logins work correctly again? I have looked on Google and other sites for a fix and nothing seems to be working.
View 5 Replies
View Related
Sep 9, 2010
While installing some new packages,i intended to delete /usr/lib/xxx/* by using ../../../*. But i missed one slash (../../*) .Due to that, all the regular files in usr/lib were deleted.Now i can boot only in recovery mode.I re-installed some libraries using wget.But for "apt-get upgarde", it is saying ,dependency on synaptic.And the loop goes like never ending..Is their any way to reinstall the lib files in /usr/lib/?
View 9 Replies
View Related
Apr 3, 2011
I installed it flawlessly, but whenever I login I get this: and it disappears and nothing happens.
View 7 Replies
View Related
Apr 10, 2011
Just installed Ubuntu 10.10 as a dual boot on a Windows Vista laptop. Usually when I've installed Ubuntu on other machines it's asked me to set a user name and password. In this instance, it's automatically taken the same user name as is used to login on Windows.When I try and log in on Ubuntu, it comes up with th user name from Windows, busks for a password. On Windows, there's no password set, so I don't know what to put.I've tried things like 'password' and 'Password' and the likes. I also tried going onWindows and adding a password there to see if Ubuntu would find it, but no such luck.
View 9 Replies
View Related
May 2, 2011
After my last upgrade from 10.? to 10? my users' (kids) were unable to login. I tried to fix it and could not find anything wrong. Now I have upgraded to 11.? and the problem persists. The users could still login by selecting an older version at the prompt during boot up.
I deleted there account and reinstall the user and still they could not login. I added a completely new test user and could not log that one in either. The system excepts the password, waits a several seconds, then the mouse curser changes to the spinning circle. The hard drive lights flash for many seconds then eventually the hard drive stops flashing. I have let it sit a long time and it never continues. Tonight I came home tried to login and it is doing the same thing to me tonight. I ran fix packages, fix grub and everything else I could think of and could not log in.
Finally I logged in to the oldest version on there and it let me in.? The screens are all the same but the desk top is entirely different? I have never seen one like this. I think its like the new version of fire fox, with every thing moved around. Icons down the side. Menu's hidden at the top? I can probably get used to that but I need to able to login, and my user's to login?
View 5 Replies
View Related
Jun 15, 2011
I am having dificulty in loggin on the server via ssh-tectia. Sometimes, i can login for like 3 seconds the it shows error "disconnected from network" Other's can login on this server via ssh-tectia without any problem, BUT i can successfully connect to other servers .
View 3 Replies
View Related
Mar 2, 2010
im using open suse,my internet connection is of low speed which is a broadband connection, in order to use gyache is there any bandwidth threshold required ,because theres no problem with pidgin for my net.if so tell me what to do to use gyache.
View 2 Replies
View Related
Mar 28, 2010
I'm not able to login as a root through ssh but i'm able to switch as a root user once i get into the Debian boxI already modified /etc/ssh/sshd_config to PermitRootLogin Yes and restart the ssh service
View 3 Replies
View Related
Sep 8, 2010
I was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
View 2 Replies
View Related
May 15, 2010
I am using CentOS. When i try to login as root using login command,i get the following:
Code:
[avi@localhost ~]$ login root
Password:
[code]...
View 12 Replies
View Related
Apr 13, 2011
I am unable to login as root to a linux machine through SSH. Login through console is working fine. SSH is not working only for root user. It is working fine for other users. I have checked the sshd_config file and it says:PermitRootLogin yesI'd be grateful if somebody can give an idea about what is going wrong.
View 15 Replies
View Related
Feb 7, 2011
One user asked me that he was not able to login through winscp. He gave me his old password and asked to reset the password.
View 3 Replies
View Related