I got the following problem, when I try to login in into terminal and I write any correct user and its password and the following message is displayed "Module is unknown" and it doesn't get into the prompt.I don't know what else to do I am little lost about this question. Probably it could be something related to pam configuration or something like that.
View 10 Repliesdifference b/w a login shell and a non-login shell ?
I know that when we use su - <username> we are getting a login shell & when we use su <user-name> we are getting a non-login shell.
Do we get any additional privileges when we have a login shell compared to a non-login shell ?
after update i can not longer see the splash login gui screen but i can only see the log in terminal... works ok but how can I enable the gui login
View 9 Replies View RelatedFor some reason my terminal now opens as -bash-4.0$ and will not let me login as any user.Is there anyway to fix this? It's very annoying and I've never came across it before.
View 4 Replies View RelatedI have a 'special script' in my .bashrc file, which I want to be performed only at Login. When I open a terminal (through a gnome launcher <gnome-terminal> as the command) it unfortunately sources .bashrc.
Hence the opening of the terminal runs the 'special script' again.
How can I instruct .bashrc not to do something except when and only when I am logging in? I found a segment of code which is supposed to do what I want but I am not sure of how it works.
Code:
Will this work to put my 'special script' in to ensure that it only runs when it is a login script and not when it is a simple launcher terminal opening?
Having logged in (to Fedora 11) with a terminal session, what command do I give to spawn the Gnome GUI desktop environment? Background: I'm running two Fedora boxes: one local, and one at the other end of my building (on fast LAN). I have full control/ownership of both boxes.
On the local box, I log-in to my vanilla F11 build, and I get the Gnome GUI automatically. Then I can open a terminal window, 'ssh -X -l myself remotebox; cinelerra' to run Cinelerra nicely in local desktop windows.
But sometimes I want to see my typical user desktop for the remote box. Now, IF the remote box is ALREADY running Gnome, I can VNC to it, etc. But, once having logged-out of the remote box, VNC closes and won't show me a GUI login page. (BTW: The remote box usually has no monitor, as well as being out of reach. So schlepping over to logon to it is a real pain.) So, here's the thing: I can login (to terminal session) and can bring up programs in local windows. But WHAT program do I launch in order to bring up Gnome??
I'm hoping someone can help me out.I made configurations changes to/etc/pam.d/system-auth and /etc/pam.d/login. When these files are configured the way they are, I can't login and/or I can't login in the GUI interface and a terminal. Contents of /etc/pam.d/login
Code:
#%PAM-1.0
#line added per security guide
[code]....
1.) Whenever i am starting a new instance of terminal, it is giving messages 'unable to read input images' five times. Actually i had run a shell script that gave this message, but why is it appearing every time, i am opening a new terminal, (that script is already over and it generated the required outputs)? Because of this, when i run 'ls' command, it is showing all the files and directories with the same color, otherwise it used to show them in different colors.
2.) Once my panel had crashed, then i have made a new panel, but after that my instant messenger icon is no more keeps sitting on the system tray as it used to do before, it closes as i close its window otherwise even after closing the window, it used to keep me logged in and the icon use to be there at system tray.
3.) automount for usbdrive not working? Note: all these problems are there only in my own user account. Other user account like root and guest has everything correct.
I recently did a fresh install of Ubuntu 10.10 64-bit. After installing the ATI drivers, I had to tweak GRUB to get the nice splash screen back during boot. Then, I installed drivers for my TV Tuner (Hauppauge 2250). The card works fine. However, my boot now goes splash screen to a terminal login for around 10 sec where system messages also show up to the GUI Login screen. I was wondering if there was anyway to return to a normal boot.
View 3 Replies View RelatedOur office housing keeping guy sat on my linux (Fedora 7) system and somehow removed the main panel. By panel I mean where all the menus are there - Applications, Places, System etc. and contains a tab for every running application. I brought back the panel but now I don't see the terminal launcher and I can't find it anywhere.It used to be there in "Applications -> System Tools -> Terminal" but now the System Tools option itself is not present there. System -> Preferences -> Look and Feel -> Main Menu. There one System option is unchecked but I can't check it and apply. I am logged in as root.
View 2 Replies View RelatedI'm using fedora 12 along with Windows XP the problem is I'm unable to login as root but I'm able to authenticate with the same password as another user.
View 4 Replies View RelatedI am unable to login following an update, Fedora 13. The screen splashes after crond is loaded. The GUI does not come-up. In text mode i can't login as root or other user accounts except in kernel 1. I can access some files via FTP command. Is the password file corrupt ?
View 14 Replies View RelatedI am using fedora 10 and I was downloading F14 by torrent. By 90 % I stopped it and shut my system now when I am going to turn on my pc unable to login my kde desktop. I am getting some message like this
Code:
/: Contaisn fail of a file system withe errors. check forced.
Unattached Inode 1440243
/: UNEXPECTED INCONSISTENCY RUN 'fcsk' MANUALLY
[FAILD]
Run 'setenforce 1' to reenable
I think my s7stem currupted but I am unable to rescue as I did last time.
I am having dificulty in loggin on the server via ssh-tectia. Sometimes, i can login for like 3 seconds the it shows error "disconnected from network" Other's can login on this server via ssh-tectia without any problem, BUT i can successfully connect to other servers .
View 3 Replies View RelatedI can successfully connect to a remote Windows Computer using Terminal Server Client but I cannot save the profile (Fedora 12).This means I have to enter the details every time I wish to connect. As I have many different remote locations I need to access on a regular basis is there any way to save the profiles?
View 6 Replies View RelatedI installed fedora 10 and shut it down after failing to have ..... run to it. later when I turned on the computer after loading 100% a black screen comes up and i cannot access any further. How can I solve the problem without reinstalling the OS.
View 2 Replies View RelatedI'm running a Dell D630 laptop that uses the onboard intel i915 chipset for both audio and video. This is in a docking station that's connected up to a larger monitor. The laptop boots just fine as it has been for quite a while now. I get to the login prompt, enter my credentials and then after pressing enter and it looks like it's going to load my profile, the wallpaper updates but then the screen goes black for a moment and I'm then brought back to the login prompt again. The system is up on the network so I was able to ssh into it and capture the following from the logs during a login attempt.
Sep 11 08:03:27 jdesilets kernel: [drm:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
Sep 11 08:03:27 jdesilets kernel: ------------[ cut here ]------------
[code]...
I clean-installed Fedora 11 and everything was running well. I wanted to try Bacula backup program and so I installed the Development package in other to compile Bacula. When I finished the installation, I discovered a bunch of foreign language supports had been installed. I just erased them. While doing so, I must have also erased some other files.
When I rebooted, the bootup process went well until just before the login screen. The screen showed the Fedora logo, f, and got stock there. I was able to login remotely from another local network computer via vncviewer. I found that GNOME dsktop was missing. I logged on to Fedora 11 text mode by issuing CTL+ATL+F3 and did 'yum groupinstall "GNOME Desktop Environment" By remote login from another computer, I determined that the GNOME Desktop had been restored. But the Fedora 11 still stil stuck just before the login screen. What do you think is missing? What do I need to reinstall?
After applying some updates to F11, I was unable to login. After putting the username and password in, the dialog would go away and it would appear that the window manager was trying to load. Somewhere in the process the mouse and keyboard stops responding. The HD activity lights flashes for quite a while but later goes out.
Hoping that F12 would help, I upgraded. The upgrade went well but the problem still exists.
After upgrading FEdora 13, user ravi was added. Then after few days neel was added. Both of the users were already existing. So when attempting login to neel, we found that every file is owned by ravi. So we did$chown -R neel:neel But after that problem started and when we rebooted the machin, there were no list of users on login screen. (then I connected to that comp remotely, it worked, but somehow I was not able to switch to root) It says incorrect password (though I new it very well). So I went to maintenance mode and changed the root password, and rebooted. Still problem persists.Now I am not able to login as root (from anywhere, login screen , terminal, remote)No list of usernames on login screen ( but i can choose, other and type login-password)
View 5 Replies View RelatedI'm not able to login after system update tonight. whenever I try to login, the screen goes black briefly and it automatically logs off.
I tried both kernel, 2.6.35.6-64.fc14.x86-64 and 2.6.35.6-45.fc14.x86-64, but failed.
i am not able to do root login even from terminal also. I was trying to block remote login through this ........
>>How can we prevent the "root" account from remote logging in via SSH
>>and Telnet but still permit root-equivalent personal accounts to log in
>>remotely?
[code]....
after this i am not able to make root login from su as well.
I have just upgraded my laptop from F8 to F10, and I am unable to login to the system as root user.At login, it provides 2 options, one is the user I created and another called 'other'.On selecting 'other' and providing uid/passwd as 'root/<rootpassword>, it says "Unable to Authenticate User"!!However, when I tried to access my windows partition, it happily accepted the root password
View 4 Replies View RelatedI have installed Fedora 10 on VmWare. I created another user besides root. I am able to login to that user using GNome login and i can switch to root using "su" command and perform the additional tasks.
Now, for one lab assignment, i need to login as root using GUI. But whenever i am trying to do, I am unable to do that. Is there some additional things that i have to do to login as root from GUI?
not able to Login as a root in my fedora 11 machine , but I can login with other user.when I login with as a root user the error occurred "user authentication failed ". After login with user account when I open Terminal and try to login with same username = root and Password= admin then I can login .
View 3 Replies View RelatedI created an account using the following command:#useradd -g developers john and successfully changed the user password with:#passwd johnThe user is unable to login using the New Password using SSH. As a root I can login (#su - john) with no problem.
View 1 Replies View Relatedi just installed fedora-14-x86_64-DVD.iso which i downloaded from net, i given root password during installation but now i am getting authentication failure.. how to login as root user?
View 13 Replies View RelatedI upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?
This is what i did to upgrade to Fc10:
Code:
Then i got an upgrade wizzard and selected Fedora 10 and than reboot.
In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.
I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.
I've installed F12 twice now. After completing the installation and getting all the updates via YumEx, my network trouble begin after a reboot. I am not able to login as root under gnome so I can't see the services panel.
Tried to reinstall 'NetworkManager' after the fact but of course I have no network connections so I may have made the problem worse. I hate to reinstall and repeat the same troubles over again as it consumes a lot of time. I don't know where to begin.
If I'm getting good at anything with Fedora, it would be making mistakes. I have Fedora 12 installed and it was running fine until I attempted to set the path in bashrc and cshrc for jdk. Now I am unable to login using the only user account I created at install. When I enter my password the login screens goes blank then my mouse pointer appears with the circling dashed loading symbol for a few secs and then brings me back to the login screen asking for my password again.
View 4 Replies View Related