Ubuntu :: Unable To Login After Dtc Install?
Sep 1, 2010
I had a mysql package that wouldn't install correctly and was informed that the fix was to install dtc. Well I installed dtc and everything appeared to go fine. I now can't log in as any user and the only way to get back onto the system is in repair mode. Even uninstalling dtc with purge doesn't help.What do I have to do to fix it so my logins work correctly again? I have looked on Google and other sites for a fix and nothing seems to be working.
View 5 Replies
ADVERTISEMENT
Jan 11, 2010
This may sound a bit odd, but after installing Ubuntu Server 9.10 64-bit version, I can't seem to log in with the root account that I created. My user account works fine. I thought that I may have fat fingered the password when I created it so I ran the installer again since it takes very little time to do so. When creating the new root account password, I was very careful to type it correctly. After the install was complete, I am still unable to use the root account. I'm unable to SU from my normal user account, too. I just receive the Login incorrect error. Is there something with using root accounts with Ubuntu server that I'm missing?
View 8 Replies
View Related
Dec 10, 2009
Using the defaukt x86_64 kernel openSuSE 11.2 (uograded from 11.1) works fine.
I have compiled my own kernel using the 11.1 config with minor changes. Botting runs fine and looking at the boot.msg compared between the default and my own kernel I only see preloadtrace.ko module missing on my own kernel which I would not expect causing mthe problem.
After the boot I am unable to login on the X login screen, text console or ssh.
The X login hangs after I entered username/password. Th elogin box disaapears and the backgroundscreen remains.
On the text console (after stopping xwindows via CTRL-Backspace) I can enter the username but the password prompt will not appear.
On ssh, where I login via plublic key I will get a message that the key will be used for login and then the session hangs as well.
View 9 Replies
View Related
May 9, 2011
Using openSUSE 11.4 (64-bit). Desktop is default KDE. All of a sudden I am no longer able to login. My desktop only has one user and when I key in the password (which I am 100% sure it is correct!) I get the dreaded "Login failed" message. I followed these instructions without success: How to reset/recover the ROOT password in openSUSE | SUSE & openSUSE Following the instructions in the above link, I tried re-typing the old password and created new ones too. But I keep on getting the Login Failed message. A strange situation
View 9 Replies
View Related
Apr 14, 2010
I planned to use Squid on my W2k3 network, because I'm tired of ISA2k6.it's a factory in itself. So, I just installed a VM with OpenSuse 11.2 and joined it to my AD W2k3 domain. After correcting the clock problems, everything is running fine except a strange feature that I was not able to solve.After a reboot, I'm not able to login with a domain account. I enter the username/password, choose the domain then it the input fields become grey for 1-2 seconds then the password field is reset and nothing happens.The most strange part comes when you logon with the local root account. You login as root, then logoff and login with any domain account : works like a charm..
View 3 Replies
View Related
Jun 1, 2011
Had to reinstall 11.4 KDE 64 bit last weekend.This morning I upgraded from the default KDE (that comes with the 11.4 DVD) to KDE 4.6.3.On rebooting I am unable to login, after I enter my password the screen flickers, then I am presented again with the logon screen.
View 5 Replies
View Related
Jun 3, 2011
I have installed OpenSUSE and could able to join to Windows 2008 domain but I am not able to login to SUSE system using domain ID. It is showing "Unable to authenticate user."
View 2 Replies
View Related
Jan 9, 2010
I just recently updated to openSUSE 11.2, but after restarting my computer, I was unable to do anything with the keyboard(type my password, CAPS LOCK, Ctrl+Alt+Backspace) or move the pointer with my wireless mouse. After restarting the computer again, I turned on the touchpad of my laptop and was able to move the pointer using the built-in touchpad. After yet a 3rd restart, I could not move my pointer using any method.
After a 4th restart, I chose to enter the failsafe mode, where I could attempt to find the problem from the command line. I manually started KDM as root by typing in "kdm", but nothing happened, which means that the screen did not switch into graphical mode, but the terminal only accepted the command. Then, I manually started X as root by typing in "X", and X started. I only saw a black screen, but I could not kill X by the traditional "Ctrl+Alt+Backspace" and was forced to shutdown my computer via the power button.
I do want to note that on every boot of my machine, "WARNING" messages have begun appearing, but they went so fast that I could not read them. If there is any way to read them, I would greatly appreciate knowing. Also when updating my machine, I remember ignoring some dependencies for kernel-extra, kdm-branding, sox, and gcc44-fortran; but I did not believe that ignoring these dependencies could cause a broken system so I proceeded with the upgrade.
View 8 Replies
View Related
Jul 14, 2011
I am running OpenSuse 11.4 with Gnome3, with 2 hard drives. One is for the system and has three partitions - root, swap, and home. The second is only data storage. Last week I started getting popups stating I had a hard drive going bad. I checked SMART status in disk utility and had several bad sectors on the system drive, so I cloned the drive to a new one with Clonezilla. Here is where everything went kooky. When I booted the new disk I had a ton of errors at boot along the lines of unable to find a drive. Upon closer inspection I realized the the system located the drives by device id instead of the traditional /dev/sdx. So I started playing with grub settings but never could get it to stop looking for the old hdd. Next, I popped in my net install disc and found I could do an upgrade install which proceeded normally. When I rebooted, no more boot errors, but I get to the black screen with spinning cursor and it will not proceed any further, I even let it run overnight and when I woke up, spinning cursor. As for troubleshooting, I was able to CTRL+ALT+F2 to a console and log in as root successfully but not as a user. When I try to log in as a user, I enter my username, then password, the "have a lot of fun" flashes by quickly and I am returned to a login prompt. I logged in to the console as root and created a new user and tried logging in again, but same thing. I am able to do an ls -l on /home/mike and all my files are there and the listed permissions look ok. I am at a loss as to what to try next. My old hdd will still boot, I just pulled it to reduce risk af data loss. I have never used auto yast before but I always see the prompt for it during an install. Can I clone the system with auto yast on to a different hard drive. Does it strip the by-device-id from the image? Which logs should I check?
View 5 Replies
View Related
Aug 16, 2010
Our Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies
View Related
Dec 5, 2010
i enabled gnome desktop effects ignor the warning and now i am not able to login to genome dektop. 1.how to disable desktop effects by commands. ALSO sometimes i get this error could not update ICEauthority file /var/lib/gdm/.ICEauthority. 2. how to solve this bug.
View 2 Replies
View Related
Oct 10, 2010
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
View 1 Replies
View Related
Mar 15, 2010
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
View 9 Replies
View Related
Mar 13, 2009
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies
View Related
Sep 30, 2015
I have an iMac G4 that I installed Jessie on successfully. However, when it boots, one of the last messages is:
[FAILED] Failed to start Load Kernel Modules.
Last line is something along the lines of:
fb: switching to nouveaufb from OFfb NVDA,NVMac
And then the text starts dissolving, and the entire screen cycles through different colors. I presume it is sitting at the graphical login prompt but it's not displaying correctly.
Based on some Google searches, it seems like I should be able to resolve this by editing /etc/modules but I can't get to that point. I have tried to get to a terminal using ctrl-alt-F1 through ctrl-alt-F12. No luck. I tried different yaboot options that were supposed to avoid using the video driver. No luck. How do I get the machine to boot straight to a regular text login instead of the X one?
This machine worked fine running Mac OS X this morning, so I don't think it's the hardware. What I can do.
View 10 Replies
View Related
Apr 21, 2010
I am using rhel 5.3. I am using windows 2003 server 32-bit (the processor is 64 bit. AMD athlon x2). I have installed vmware and installed rhel5.3 64 bit on top of it. Now i am able to login as root from GUI mode (f7 console), but unable to login in text console from f1 to f6. I checked the /etc/securetty. But there was nothing unusual there. I think udev is causing this problem, since google said so. I cant find where the udev.rules file is located that google searches are taking about. How do i enable root login in f1-6 console.
View 4 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Jun 2, 2010
i'm using OpenSuSE 11.2 and was wondering if there is anyway to set remote login as the default login method.
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Jun 2, 2010
When tried to login from login screen it gives a message "Permission Denied" for all users including Root.So i tried it from recovery mode im able to login as root but has no permission to change any thing.
View 1 Replies
View Related
Feb 7, 2010
I have used Ubuntu 9.10 for a few months. I like it because it seems faster than Windows XP or Vista. Nevertheless, it has happened many times that I couldn't log in Ubuntu after an update. I thus had to uninstall Ubuntu from Windows and reinstall a clean copy of Ubuntu again.
1. Is this common to you guys or just me alone?
2. What are the causes?
3.Does Wubi play a role in causing this login problem since I install Ubuntu thru Wubi?
4. What are other solutions in solvng this login problem?
View 4 Replies
View Related
Apr 2, 2010
For some reason I am no longer able to log into my Ubuntu 9.10 system. I get to enter the password and it accepts it, starts to log me in but then throws me back to the login screen again without even a glimpse of the desktop. What could be causing this? Everything was working fine yesterday and I haven't made any changes to the OS.
View 9 Replies
View Related
Apr 26, 2010
I've tried to test 10.04. One, by upgrading a working KK installation. The other, was a fresh install. Both were as VMWare virtual machines.Both installs had the same problem. The install/upgrade process goes smoothly. When the GUI logon screen appears & I click on the user name, I'm unable to type in the password box. Nothing appears. If I then click "continue", the result is "authentication failure".
View 2 Replies
View Related
