Just installed Ubuntu 10.10 as a dual boot on a Windows Vista laptop. Usually when I've installed Ubuntu on other machines it's asked me to set a user name and password. In this instance, it's automatically taken the same user name as is used to login on Windows.When I try and log in on Ubuntu, it comes up with th user name from Windows, busks for a password. On Windows, there's no password set, so I don't know what to put.I've tried things like 'password' and 'Password' and the likes. I also tried going onWindows and adding a password there to see if Ubuntu would find it, but no such luck.
I may be a beginner to Ubuntu 10.10, but I'm fairly certain that this is weird: I have had no trouble logging into my Ubuntu 10.10 netbook until this morning. Now I am unable to get past the login screen. It says that there is an Authentication Failure, which is bogus. Not only should the password work, but it does in the Terminal. I am able to login to the terminal and gain root access.
I can even change my unix password, but no matter what I try I can't get to my desktop. I did run into a major issue with a frozen program. Rather than reboot, I tried to close it using the kill command. What ended up happening was that all that remained was my wallpaper, probably a bad move on my part, but I'm a rookie. I think I killed all running applications. This happened last night... so probably related.
I newly installed Ububtu 8,04.3. I formatted my hard drive and erased Windows XP and tried to do the manual partitioning but don't have enough knowledge so picked the guided tour. Everything seemed to install but when I restarted it comes to "computer log-in" and wants a user name and password. I put in the user name I chose during installation and tried to put in the password but it wouldn'd type in - it also seemed to want a name for "computer." Does anyone know where I went wrong? I've been struggling to learn computer stuff on my own.
Having installed Debian 7 on an old machine from a Liinux Format Magazine DVD I was unable to log in as a specific user. I can login as root and use useradd etc but when I logout of root I still cannot login as a user and nor will the machine accept my root password. I have to shutdown and reboot to get back into root. I'm using O'Reilly's Linux Pocket Guide from 2004 for the commands. Could it be that things have changed?
i am not able to login to UBUNTU, after giving the existing password, dont know how do i getinto ,i couldnot find any option to open up a new thread , what is happening is , whn i giving the password it is taking after few secs it is coming back to login promt again , asking the password again. how do i get into the box,
I thought these were the same password?In-fact, they WERE the same password on the set-up I currently have.But now, weirdly, I can log in fine but I the exact same password is not using in order to perform admin tasks.I've tried a recovery mode, console, and then "password (username)" in order to reset the password.This does reset the password I need to use to log in, but the password still does not work for performing admin tasks
i changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
everytime i try to vnc to my box, it pops up the keyring authentication, which is obviously a huge problem when logging in remotely.how do i change my keyring password to match my login password?
I have a brand new install.I was doing some housekeeping and made a more sure password.Something went wonky and I got locked out.So I booted to root and changed the password.I'm back in the box now.But, my keyring password no longer matches my user password.So every time I want to do something I am asked for my old password.How do I change my keyring password to match my login password?
I needed to use Synaptic Package Manager to install an app, but the dialog box ("enter the Administrative Password") that pops up before you can use Synaptic doesn't recognize my password ("incorrect password). I tried typing it into a text editor and it's spelled right, caps lock not turned on or anything.
In Terminal, sudo recognizes it, and it is recognized when I log into Ubuntu. I'm the sole user, I have admin privileges, I've been doing admin things.
I just now did System > Administration > Users and Groups and got a dialog box saying
"Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)"
Moving past that, I changed my user password, and Ubuntu authenticated it.
How do you launch Synaptic Package Manager from the command line?
I just finished installing 10.10 on my pc. the problem is that i cant login to the desktop i enter the password, the login sound plays and im stuck looking at the wallpaper. nothing else. i tried logging in safe mode and it worked. how can i get it to work normally?
pc specs: Pentium 4 2.6 ghz 512mb ram ati radeon 9600 graphics card
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I am an absolute Linux Beginner who is being required to do a bit of admin work because the boss just fired the old linux admin. Unfortunately, one of our employees cannot remember her password to her email account and as such I need to reset it on our linux server.What I want to check is that this email account is actually a linux user account and I simply will reset the password for it using the passwd command from the root login. Is that correct?
I work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
I just updated to 10.10 (), but I have one problem. I changed my password a few days ago, and now whenever I log on, It comes up with the attached message, and I have to type in my OLD password to connect to wireless.
I have a problem regarding the ubuntu enterprise cloud. I have installed CC,CLC,SC,NC and a client and logged into thje user interface using my browser for the first time with bith username and passwd as admin and downloaded the credentials.But now as I try to login with the same username and passwd, it says that its an invalid login. I understand we have to change the password on the first login but i don't remember doing the same.
I tried recover password option and gave the user name as admin and email address as my gmail id. It says that I have to follow the instructions sent to the mail, but there is no mail sent I have done it like 5 or 6 times with different mail ids
Is it possible to have your login password t be different then your SUDO password. I did a search on sudo password- Almost every post has the term in it.
I'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
I have setup a nis server and client. At first I didn't have a local user defined on the client. The client then used the user and passwords from NIS, so that was ok.
The problem then is, that when the server is down, I couldn't login to my client anymore. So I created a local user with the same name on the client but with a different password (after I shut the nis server down, if nis server was on, I couldn't create a local user with the same name). I then edited etc/nssswitch.conf as follows:
Code: # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # compat Use compatibility setup
[Code].....
If NIS server is on: client has to login with the nis password If NIS server is down: client has to login with the local password (as fallback)
However the actual behaviour is that I can only login with the local password now. The NIS pasword doesn't seem to be used anymore.
I have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
I've set up password-less login for user1 on a Ubuntu machine to login automatically into a Fedora box using the publickey authentication method. Everything is working smoothly. Now, there is a user2 on Fedora but he does not have an account on Ubuntu.
I tried to login as user2 from Ubuntu to but got the following error :
Code:
Predictably neither scp or sftp work either. I have several questions as a result.
1.Is the SSH server rejecting user2 login because I am inadvertently using user1 keys (as I am logged in as user1) ?
2. Do I need to have a user2 account on Ubuntu and public/private key authentication setup with Fedora for user2 to be able to login ?
3. Is there a method I can use to password login as user2 from Ubuntu to Fedora (even though there is no user2 account on Ubuntu) AND still keep password-less login for user1 or do I have to have password-less login for both ?
At present the only way to access the user2 account from Ubuntu is to SSH using the user1 account and then su to user2.
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
I've recently switch to Arch with Lxde, and I'm looking for a login manager. I want this to support a "guest" account, a user that can be logged on passwordlessly, but not just auto-login. I don't really want to use kdm or gdm, either.
I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
I'm using Ubuntu 10.04LTS. I'm trying to configure my chat accounts. But after entering username and password, it is asking "Enter password to unlock your login keyring". I have entered my login password. But it is saying that "The password you use to log in to your computer no longer matches that of your login keyring."
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
